OEMSETUP.INF Driver File Contents (SP125T.zip)

[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    PCMCIA
[Options]
    ETHERNET
[FileConstants]
UtilityInf      = "UTILITY.INF"
ParamInf        = "NCPARAM.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer    = "PCMCIA"
ProductMajorVersion     = "4"
ProductMinorVersion     = "0"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName     = "NE2000"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\PCMNDIS.sys"
NetRuleSoftwareType     = "ne2000Sys ndisDriver ne2000Driver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """ne2000Sys"" yes no container"
NetRuleSoftwareClass    = {"ne2000Driver basic"}
NetRuleSoftwareBindable = {"ne2000Driver ne2000Adapter non exclusive 100"}
ProductHardwareName     = "NE2000"
NetRuleHardwareType     = "ne2000 ne2000Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass    = {"ne2000Adapter basic"}
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        ifstr(i) $($1) == ""
           goto returnoptions
        endif
        set PlatformList = ^(PlatformsSupported, 1)
        Ifcontains(i) $($1) in $(PlatformList)
           goto returnoptions
        else
           set Status = STATUS_NOTSUPPORTED
           goto finish_ReturnOptions
        endif
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = $(OK)
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    set ActivateDetection = FALSE
    Ifstr(i) $(!NTN_InstallMode) == deinstall
                set StartLabel = removeadapter
        else-Ifstr(i) $(!NTN_InstallMode) == Update
                        set StartLabel = UpgradeSoftware
        else-Ifstr(i) $(!NTN_InstallMode) == bind
                set StartLabel = bindingadapter
        else-Ifstr(i) $(!NTN_InstallMode) == configure
                set CommonStatus = STATUS_REBOOT
                set ActivateDetection = TRUE
                set StartLabel = configureadapter
                Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
                        Debug-Output "Cannot configure the Novell 2000 driver software."
                        Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                Debug-Output "ShellCode error: cannot get an error string."
                                goto ShellCodeError
                        endif
                        set Error = $($R0)
                        set from = end
                        set to = end
                        goto nonfatalinfo
                endif
    else
                set StartLabel = installadapter
                set OEM_ABANDON_OPTIONS = {}
                set OEM_ABANDON_SOFTWARE = FALSE
                set OEM_ABANDON_ON = TRUE
                set ActivateDetection = TRUE
    endif
    Debug-Output "INF: =================================================="
    Debug-Output "INF: STF_CWDIR is: "$(!STF_CWDIR)
    Debug-Output "INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
    Debug-Output "INF: Option is: "$(Option)
    Debug-Output "INF: !STF_NCDETECT  is: "$(!STF_NCDETECT)
    Debug-Output "INF: !STF_NCOPTION  is: "$(!STF_NCOPTION)
    Debug-Output "INF: !STF_NCDETCARD is: "$(!STF_NCDETCARD)
    Debug-Output "INF: !STF_NCDETINFO is: "$(!STF_NCDETINFO)
    Debug-Output "INF: =================================================="
    Set DetectedCard = FALSE
    set PCMCIA = 1
    set CardType = 0
    Ifstr(i) $(ActivateDetection) != TRUE
        Goto skipdetection
    Endif
    Set TypeList = {{IRQ,IRQList,IRQValue},+
                    {PCMCIA, PCMCIAList, PCMCIA},+
                    {CARDTYPE, CardTypeList, CardType},+
                    {IOADDR, IOBaseAddrDecList, IOBaseAddrValue}}
    Debug-Output "INF: Calling Param_BuildTypeLists"
    Shell $(ParamInf) Param_BuildTypeLists NE2000IBMCOMPAT $(TypeList)
    Set Status = $($R0)
    ifstr(i) $(Status) != STATUS_SUCCESSFUL
        Goto fataldetect
    Endif
    Debug-Output "INF: Calling Param_SetDefaults"
    Shell $(ParamInf) Param_SetDefaults {}
    Shell $(ParamInf) HexListFromDecList $(IOBaseAddrDecList)
    Set IOBaseAddrHexList = $($R0)
    Shell $(UtilityInf) SortList $(IRQList) TRUE FALSE
    Set IRQList = $($R0)
    Ifstr(i) $(!STF_NCDETECT) == YES
        Ifstr(i) $(!STF_NCOPTION) == "NE2000IBMCOMPAT"
           Set DetectedCard = TRUE
           Debug-Output "INF: Setting DetectedCard to TRUE"
        Endif
    Endif
skipdetection =+
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
           Shell $(UtilityInf), VerExistedDlg, $(ProductSoftware$(Option)Title),+
               $(ProductVersion)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif
           goto end
        else
           Shell $(UtilityInf), CardExistedDlg
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif
           ifstr(i) $($R1) != "OK"
               set CommonStatus = STATUS_USERCANCEL
               goto end
           endif
           set OldVersionExisted = $(TRUE)
        endif
    endif
    Ifstr(i) $(DetectedCard) != TRUE
        Goto adaptersetup
    Endif
    StartWait
    Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD)
    EndWait
    Ifstr(i) $($R0) != STATUS_SUCCESSFUL
        Goto adaptersetup
    Endif
    Set DetectedParams = $($R1)
    Debug-Output "INF: Calling Param_SetDefaults to merge detected params"
    Shell $(ParamInf) Param_SetDefaults $(DetectedParams)
    goto adapteroptions
configureadapter = +
    Ifstr $(KeyProduct) == $(KeyNull)
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) == $(KeyNull)
            set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
            Debug-Output "Cannot find component product key"
            goto fatalregistry
        Endif
    Endif
    Debug-Output "INF: Shelling to FindService"
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "INF: FindService shell failure"
        Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
        Debug-Output "INF: FindService Shell error: "$($R0)
        Goto fatalregistry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
        set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
        Debug-Output "Cannot find component service"
        goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList
    ForListDo $(ValueList)
        set ValueItem = $($)
        set ValueName = *($(ValueItem),1)
        set ValueData = *($(ValueItem),4)
        Ifstr(i) $(ValueName) == "InterruptNumber"
            set IRQValue = $(ValueData)
        else-ifstr(i) $(ValueName) == "IoBaseAddress"
            set IOBaseAddrValue = $(ValueData)
        else-ifstr(i) $(ValueName) == "BusType"
            set BusInterfaceType = $(ValueData)
        else-ifstr(i) $(ValueName) == "PCMCIA"
            set PCMCIA = $(ValueData)
        else-ifstr(i) $(ValueName) == "BusNumber"
            set BusNumber = $(ValueData)
        endif
    EndForListDo
    ifstr(i) $(IRQValue) == ""
        set IRQValue = *($(IRQList), 2)
    endif
    ifstr(i) $(IOBaseAddrValue) == ""
        set IOBaseAddrValue = *($(IOBaseAddrDecList), 1)
    endif
adaptersetup =+
    Shell $(ParamInf) Param_ParameterConfidence
    Ifstr(i) $($R0) != STATUS_SUCCESSFUL
        Debug-Output "OEMNADE2.INF: parameter confidence too low to bypass configuration"
        Goto adapteroptions
    Endif
    Ifstr(i) $(DetectedCard) == TRUE
        Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM
            Goto adapterverify
        Endif
    Endif
    goto adapteroptions
adapteroptions = +
    set from = adapteroptions
    ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
        ifstr(i) $(!AutoNetInterfaceType) != ""
            set BusInterfaceType = $(!AutoNetInterfaceType)
        else
            set BusInterfaceType = 1
        endif
        ifstr(i) $(!AutoNetBusNumber) != ""
            set BusNumber = $(!AutoNetBusNumber)
        else
            set BusNumber = 0
        endif
        goto adapterverify
    endif
    set IOBaseAddress = *($(IOBaseAddrHexList), ~($(IOBaseAddrDecList),+
        $(IOBaseAddrValue)))
    read-syms FileDependentDlg$(!STF_LANGUAGE)
    ui start "InputDlg"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
                set IRQValue = $(Combo1Out)
                set IOBaseAddress = $(Combo2Out)
                ui pop 1
    else-ifstr(i) $(DLGEVENT) == "BACK"
                set CommonStatus = STATUS_USERCANCEL
                Debug-Output "Action: exit. Bye."
                ui pop 1
                goto end
    else
                ui pop 1
                Debug-Output "Action: unknown. Bye."
                goto end
    endif
    set IOBaseAddrValue = *($(IOBaseAddrDecList), ~($(IOBaseAddrHexList),+
        $(IOBaseAddress)))
    ifstr(i) $(!STF_NCDETINFO) == {}
        ifint $(PCMCIA) != 1
            Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
            endif
            set BusInterfaceType = $($R1)
            set BusNumber = $($R2)
        else
            set BusInterfaceType = 1
            set BusNumber = 0
        endif
    else
        set BusInterfaceType = *($(!STF_NCDETINFO),5)
        set BusNumber = *($(!STF_NCDETINFO),6)
    endif
adapterverify =+
    Ifstr(i) $(DetectedCard) != TRUE
        Goto skipoptions
    Endif
    Debug-Output "INF: Calling Param_VerifyCard"
    Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD)
    Ifstr(i) $($R0) == STATUS_SUCCESSFUL
        Debug-Output "INF: Param_VerifyCard succeeded"
        Goto skipoptions
    Endif
    Set from = adapteroptions
    Set to = skipoptions
    Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error: cannot get an error string."
        goto ShellCodeError
    endif
    set Error = $($R0)
    Goto Warning
skipoptions =+
    ifint $(OldVersionExisted) == $(TRUE)
        ifstr(i) $(!NTN_InstallMode) == configure
                goto writeparameters
        endif
    endif
    StartWait
    ifint $(OldVersionExisted) == $(FALSE)
        ifstr(i) $(!NTN_InstallMode) == "install"
                Ifstr(i) $(DoCopy) == "YES"
                    Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
                    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        Goto ShellCodeError
                    Else-Ifstr(i) $($R0) == STATUS_FAILED
                        Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                           goto ShellCodeError
                        endif
                        set Error = $($R0)
                        Goto fatal
                    Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
                        Goto successful
                    Endif
                    Set SrcDir = $($R1)
                Endif
                install "Install-Option"
                ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
                    Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        goto ShellCodeError
                    endif
                    set Error = $($R0)
                    goto fatal
                endif
        endif
       Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
                        $(ProductSoftwareName), +
                        $(ProductSoftwareName), +
                        $(ProductSoftware$(Option)Title), $(STF_CONTEXTINFNAME), +
                        $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
                        $(NetEventDLL)
       Set OEM_ABANDON_SOFTWARE = TRUE
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error"
        goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       set KeyProduct      = $($R1)
       Set SoftNetRulesKey = $($R2)
       CloseRegKey $($R3)
       CloseRegKey $($R4)
       CloseRegKey $($R5)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        Debug-Output "Registry error: add software components"
        CloseRegKey $(KeyProduct)
        CloseRegKey $(SoftNetRulesKey)
        goto fatalregistry
       endif
       set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                   {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                   {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                   {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftware$(Option)Title)},+
                   {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftware$(Option)Description)},+
                   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
       Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error."
        goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        Debug-Output "Registry error: add value list."
        CloseRegKey $(KeyProduct)
        CloseRegKey $(SoftNetRulesKey)
        goto fatalregistry
       endif
       set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                        {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                        {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
       Shell  $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error."
        goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       CloseRegKey $(KeyProduct)
       CloseRegKey $(SoftNetRulesKey)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        Debug-Output "Resgitry error: add value list."
        goto fatalregistry
       endif
    endif
    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
    ifint $($R4) != -1
                Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
    endif
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "Cannot add hardware component"
                goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                EndWait
                Debug-Output "Registry error: add hardware component"
                CloseRegKey $($R1)
                CloseRegKey $($R2)
                CloseRegKey $($R3)
                goto fatalregistry
    endif
    set KeyParameters = $($R3)
    set KeyAdapterRules = $($R2)
    set AdapterNumber = $($R4)
    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                       {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
                       {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                       {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                       {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                       {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
    Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error"
                goto ShellCodeError
    endif
    CloseRegKey $($R1)
    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
    Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                EndWait
                Debug-Output "Resgitry error: add value list."
                CloseRegKey $(KeyParameters)
                CloseRegKey $(KeyAdapterRules)
                goto fatalregistry
    endif
    CloseRegKey $(KeyAdapterRules)
    goto writeparameters
writeparameters = +
    ifint $(BusInterfaceType) == 8
        set PCMCIA = 1
        set BusInterfaceType = 1
    endif
    set NewValueList = {{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
                       {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
                       {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
                       {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                       {CardType,$(NoTitle),$(!REG_VT_DWORD),0},+
                       {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)}}
    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    ifint $(PCMCIA) == 1
        set NewValueList = {{Pcmcia,$(NoTitle),$(!REG_VT_DWORD),1}}
        Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    else
        DeleteRegValue $(KeyParameters) "Pcmcia"
    endif
    ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
        Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
    endif
    CloseRegKey $(KeyParameters)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                Debug-Output "Registry error: Add value list"
                goto fatalregistry
    endif
    set PCMCIADatabaseKeyName = $(!NTN_ServiceBase)"\Pcmcia\DataBase"
    Debug-Output "INF: Opening PCMICA database key "$(PCMCIADatabaseKeyName)
    OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADatabaseKeyName) $(MAXIMUM_ALLOWED) PCMCIADatabaseKey
    Ifstr $(PCMCIADatabaseKey) == $(NULL)
        Debug-Output "INF: Pcmcia\DataBase not present"
    else
        OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADatabaseKeyName)"\PCMCIA" $(MAXIMUM_ALLOWED) PCMCIADatabasePCMCIAKey
        Ifstr $(PCMCIADatabasePCMCIAKey) == $(NULL)
             CreateRegKey $(PCMCIADatabaseKey) {"PCMCIA", 0, 0} "" $(MAXIMUM_ALLOWED) "" PCMCIADatabasePCMCIAKey
        Endif
        CreateRegKey $(PCMCIADatabasePCMCIAKey) {"Ethernet Card", 0, 0} "" $(MAXIMUM_ALLOWED) 0 PCMCIADatabaseETHERNETKey
        SetRegValue $(PCMCIADatabaseETHERNETKey) {DeviceType, 0, $(!REG_VT_SZ),"NET"}
        SetRegValue $(PCMCIADatabaseETHERNETKey) {Driver, 0, $(!REG_VT_SZ),"NE2000"}
        SetRegValue $(PCMCIADatabaseETHERNETKey) {AttributeMemorySize, 0, $(!REG_VT_DWORD),4096}
        CloseRegKey $(PCMCIADatabaseETHERNETKey)
        CloseRegKey $(PCMCIADatabasePCMCIAKey)
        CloseRegKey $(PCMCIADatabaseKey)
    Endif
    EndWait
    goto successful
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
                Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
                                $(ProductSoftwareName)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                Debug-Output "ShellCode error"
                                goto ShellCodeError
                endif
                set RegistryErrorIndex = $($R0)
                Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                                goto fatalregistry
                endif
    else
                Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
                        $(ProductSoftwareName), $(!NTN_RegBase)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                Debug-Output "ShellCode error"
                                goto ShellCodeError
                endif
                set RegistryErrorIndex = $($R0)
                Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                                goto fatalregistry
                endif
    endif
    goto end
UpgradeSoftware = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        install "Install-Update"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
            goto fatal
        endif
        SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
        SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
        CloseRegKey $(KeyProduct)
    else
        goto fatalregistry
    endif
    goto end
successful = +
    goto end
abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fataldetect = +
    Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error: cannot get an error string."
        goto ShellCodeError
    endif
    set Error = $($R0)
    Goto fatal
fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)
[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-ETHERNET $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    ifstr(i) $(DoConfig) == "YES"
    endif
    Exit
[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-ETHERNET $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   exit
[Source Media Descriptions]
    1  = "Windows NT Setup Disk #1"  , TAGFILE = disk1
    2  = "Windows NT Setup CD-ROM Disk "  , TAGFILE = disk2
    3  = "PCMCIA 10Mbps Ethernet Card Driver Diskette"
[Signature]
    FileType = MICROSOFT_FILE
[GetSignature]
    read-syms Signature
    return $(FileType)
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
[Files-Inf]
3,oemsetup.inf,    SIZE=30973,     RENAME=$(!UG_Filename)
[Files-ETHERNET]
3,PCMNDIS.SYS ,     SIZE=24576
[LanguagesSupported]
    ENG
[OptionsTextENG]
    ETHERNET = "PCMCIA 10Mbps Ethernet Card"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
ProductSoftwareETHERNETDescription = "PCMCIA 10Mbps Ethernet Card Driver"
ProductSoftwareETHERNETTitle       = "PCMCIA 10Mbps Ethernet Card Driver"
ProductHardwareETHERNETDescription = "PCMCIA 10Mbps Ethernet Card"
ProductHardwareETHERNETTitle       = "PCMCIA 10Mbps Ethernet Card"
FunctionTitle   = $(ProductHardware$(Option)Title)" Setup"
ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"
[FileDependentDlgENG]
Label1 = "&IRQ Level:"
Label2 = "I/O &Port Address:"
DlgType = "RadioCombination"
DlgTemplate = "NE2000"
Caption = $(FunctionTitle)
Combo1List = $(IRQList)
Combo1Out  = $(IRQValue)
Combo2List = $(IOBaseAddrHexList)
Combo2Out  = $(IOBaseAddress)
ComboListItemsIn  = {Combo1List, Combo2List}
ComboListItemsOut = {Combo1Out, Combo2Out}
EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
NotifyFields = {NO, NO}
HelpContext = $(!IDH_DB_OEMNADN2_INS)
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 2.15