*****************************************************************************
* *
* PNP ISA ETHERNET ADAPTER *
* *
* Installation Note for Windows 2000 *
* *
*****************************************************************************
Plug & Play Mode:
Microsoft had put the RTL8019AS chip driver in the Windows 2000 system.
Please set adapter to "Plug and Play" mode with the SETUP program.
After Win2000 starts up, it can recognize this adapter automatically.
Jumperless Mode:
1. Plug adapter into one of the ISA slots of your PC.
2. Turn the PC power on then boot into Windows 2000.
3. Open System Properties. To do this, you can :
Right click on the "My Computer" icon on your desktop, then select
"Properties".
4. Select the "Hardware Wizard" button. "Add/Remove Hardware Wizard"
dialog box will appear. Click "Next".
5. Select "Add/Troubleshoot a device".
6. Select "Add a new device".
7. Select "No, I want to select the hardware from a list.".
8. Select "Network adapters". Then, click "Have Disk...".
9. Enter driver path "A:\WIN2000" and then select "PNP ISA Ethernet Adapter".
10. Warning message will appear:
Windows could not detect the setting of the device. To use this
device, you must enter its hardware settings. Consult the
documentation that came with this device for information.
Click OK.
11. Click "Interrupt Request" to enter your hardware IRQ.
Click "Input/Output Range" to enter your hardware I/O.
Click OK button. Then, Click "Next >" button.
12. Windows will prompt "Do you want to continue the installation ?" in
the "Digital Signature Not Found" dialg box. Click "Yes" and windows
will start to copy the driver.
13. Click "Finish" button and "Yes" to restart your computer.
----
All trademarks or brand names mentioned are properties
of their respective companies.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.