WEBGLIDER Multilink-PPP Installation The WEBGLIDER must be connected to your computer. You will need to know the COM port to which the WEBGLIDER is assigned. Before running the flash utility, unplug the WEBGLIDER's power supply. 1. Insert the diskette containing the FLASH.EXE program into your floppy drive. 2. Type "FLASH" followed by the name of the BIOS file, which has ".BIN" extension. Follow the file name with the number of the assigned COM port. EXAMPLE: FLASH NCUS114A.BIN 2 (where FLASH is the command, NCUS114A.BIN the BIOS file name, and 2 is the assigned COM port). 3. When the message "Resetting ISDN-TA..." appears, reconnect the power adapter to the WEBGLIDER. Troubleshooting 1. The message, "Cannot open download file ******.bin" appears. Check the directory on the diskette for the correct file name. 2. The message "Resetting ISDN-TA..." appears, but nothing seems to be happening. Make sure the WEBGLIDER is properly connected to your computer. Disconnect the power supply to the WEBGLIDER. Then run the FLASH program again. When the message appears again, re-connect the power supply to the WEBGLIDER. 3. You are not sure which BIOS file you are supposed to use. Check the directory on the diskette. The name of the file will have a .BIN extension. Example: NCUS114A.BIN. Configuration Options for Windows 95 Three configuration options are provided with the WEBGLIDER driver for Windows 95. These include : V.120, PPP, amd ML-PPP (Multilink PPP). During installation, select the configuration you intend to use. The Windows 95 Dialer and Winsock will use the assigned configuration. Users of Windows 3.x and other Operating Systems To enable Multilink PPP, add the following to end of your initialization string: &Q3&B3 When the same number is to be dialed twice during Multilink-PPP operation, the destination number needs to be specified only once. This will tell the WEBGLIDER to dial that number twice (once on each B-channel, e.g., ATDT5551000 dialed twice). If the numbers are different, both numbers must be specified. This will tell the WEBGLIDER to dial one number for each B-channel (e.g., ATDT5551000+5552000). The &Q command controls whether V.120 or PPP mode is selected. The command &B determines how many B-channels are selected.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.