1. lan_w95w98.zip Driver
2. readme.txt File Contents

readme.txt Driver File Contents (lan_w95w98.zip)

UPGRADING DEVICE DRIVERS FOR
HITACHI HIAE-80/100 PCI 10/100 Base Ethernet LAN Module

WINDOWS 95
1. Place the following updated network driver files onto a diskette:
		NETHIAE.INF
		HIAEPCI.SYS
   
2. Go into the Device Manager:
   Control Panel, System, and click on Device Manager tab.

3. Expand Network adapters and depending on your Notebook model,
   select:
	HITACHI HIAE-80/100 PCI 10/100 Base Ethernet LAN Module
	or
	HITACHI HIAE-80W/100W PCI 10/100 Base Ethernet LAN Module
   
4. Click on Properties, then click on the Driver tab, then click on
   Update Driver button.

5. Select the "No, select driver from list" option and click on
   Next.

6. Click on the Have Disk button.  At the "Install From Disk" window,
   be sure to point to the "A:\" location, insert the diskette
   containing the updated drivers into the floppy drive, then click on
   OK

7. Highlight the device, then click on OK.  Windows will install the
   updated driver files from the floppy drive and then request for the
   Windows 95 CD-ROM.  Click on OK and then point the Operating System
   to C:\WINDOWS\OPTIONS\CABS for the remaining files.

8. When complete, click on Close.


WINDOWS 98
1. Repeat steps 1 through 4 as listed for the Windows 95 Operating
   System.

2. Click on Next at the informational window.

3. Select the option for Windows to "Search for a better driver than
   the one your device is using now. (Recommended)".  Then click on
   Next.

4. Check the Floppy disk drives box only.  Insert the diskette
   containing the updated drivers into the floppy drive and click on
   Next.

5. Windows will locate the updated driver.  Click on Next to install.

6. When complete, click on Finish.