1. PortRepv224.exe Driver
2. readme.txt File Contents

readme.txt Driver File Contents (PortRepv224.exe)

  
  Targus Group International Driver Revision History File
  (c) Copyright 2000-2002 Targus, Inc.  All Rights Reserved.
  
  
  README TABLE OF CONTENTS
  
  1. Installation

  2. Uninstallation	
   
  3. Driver Revision History
   
  4. Known Issues
  
  ________________________________________


1.   Installation
  
  *** IMPORTANT ***
  If a previous version of the Port Replicator driver is present on your PC, be sure to 
  uninstall it prior to installing the new driver. Refer to step 2 for instructions on 
  uninstalling the drivers.

  1. To install the Targus Port Replicator from your PC, first make sure that you
     the Port Replicator is disconnected from the PC.
  2. Double-click on the "SETUP.EXE" file from the CD to run the setup application.
  3. Once the setup application is complete, reboot your system.  After the system has 
     rebooted, connect the USB cable from the Targus Port Replicator into the USB port of 
     your PC. This will initiate the hardware detection process and may take several minutes.
  4. Once all the components of the Targus Port Replicator have been detected and           
     configured, you may begin using the Port Replicator.

2.   Uninstallation

  1. To uninstall the driver, go to the CONTROL PANEL and double click the ADD/REMOVE PROGRAMS
     applet.
  2. From the ADD/REMOVE PROGRAMS dialog box, select the PA090 program and click on the 
     CHANGE/REMOVE button. 


3.   Driver Revision History

  V2.22: -Changed install package from single executable to expanded format.
         -Added SETUP.ISS file for silent mode installs.
 	 -Added RESTART option after driver installation.

  V2.21: -Corrected issue with serial driver (u2s2kxp.sys) crashing when running XP driver          
          verifier
	 -Added CATALOG files for Windows 2000, Windows '98, and XP
	 -Corrected the disabled COM port issue under Windows 2000 
          (no serial device recognizing com port)
	 -Added localized support in setup GUI

  V2.20: -Fixed uninstall problem with Ethernet driver under Windows 2000.
	 

  V2.10: -Added limited supported for serial PDA cradles

  V2.00: -Added Ethernet support for ADMtek 8511 chipsets

  V1.90: -Added support for Compaq legacy PS2 keyboard with smartcard reader
	 -Addressed issue with Panasonic 1124 dot matrix printer
  
   
4.   Known Issues / Limitations 

  1.  Legacy software written to address physical com port directly will not function with
      the virtual com port of the Port Replicator.
  2.  Serial device support is generally limited to mice and modems. Serial device support     
      beyond mice and modems is limited.
  3.  Serial PDA cradles will not sync after suspending a machine unless the SERIAL option      
      under Hot-Sync is uncheck prior to suspending and recheck after resuming.
  4.  Multiple Targus Port Replicators installed on the same platform will cause the       
      Ethernet drivers to conflict. 
  5.  USB mice with PS2 adapters may not function properly on the PS2 port.
  6.  Programmable PS2 keyboards and PS2 mice may not function properly on the PS2 port's 
      of the Port Replicator.
  7.  Parallel storage devices may not function properly on the parallel port of the Port
      Replicator. 
  8.  Some printer install applications will not recognize the virtual parallel port
      installed by the Targus Port Replicator. Manual printer port configuration is required 
      for these instances.
  9.  Due to the USB 1.1 bandwidth limitation, the theoretical maximum throughput for the    
      Ethernet port on the Targus Port Replicator will be limited to 12Mb/s. This will 
      decrease as additional devices are attached to the Port Replicator.