Readme.txt for GENICOM Intelliprint mL450 / LN45 Windows 95 driver <Overview of Contents> This document explains the items listed below. The driver should be used only after this document has been read. File Composition Install Guide Points to Note <File composition> The following files are contained in the directory ENGLISH. ML45.DRV GENICOM Intelliprint mL450 / LN45 printer driver module. OEMSETUP.INF Information file used for installing printer driver. README.TXT Contains explanation and points to note for printer driver. <Install Guide> The GENICOM Intelliprint mL450 / LN45 printer driver can be installed by either of 2 methods described below: (1)Plug and Play printer detection. (a)Windows 95 automatically detects the printer at installation time or during the boot process. (b)Plug and Play detection code will prompt the user for the appropriate files if they are not resident in the Windows directory, by displaying the "New Hardware Found" dialog box. (c)From the "New Hardware Found" dialog box select the option "Driver from disk provided by hardware manufacturer" and click "OK" push-button. (d)The "Install from disk" dialog box is displayed prompting the user to select the drive and directory containing the installation disk. (e)Insert the Printer driver installation CD into the CD drive, use the "Browse" button to select sub-directory mL45\Drivers\pcl\WIN95\ENGLISH of the GENICOM Printer CD and click "OK". Note : Another method would be to copy the contents of the above indicated directory on to a diskette and install from a:\ . This is because the installation may require some files from the original Windows installation CD and you then you would need to remove the GENICOM CD. This especially would be the case when this is the first printer to be installed. (f)The "Select Device" dialog box appears displaying the model-name's "GENICOM Intelliprint mL450 PCL" and "GENICOM LN45 PCL". Select a model. Click "OK" to continue. (g)A dialog appears prompting the user to type the Printer name. Type an appropriate name or use the one supplied and click "Next>". (h)The next dialog prompts the user to print a test page. Select "Yes" or "No" and click "Finish". (i)Once all the appropriate files have been copied and the driver is installed, a test page is printed. Depending on whether the test page was correctly printed or not select "Yes or "No". The GENICOM Intelliprint mL450 / LN45 PCL Windows 95 printer driver is now installed. (2)Set-up from Printers folder. (a)Click the Start button, point to Settings, and then click Printers. (b)Double-click Add Printer. (c)The Add Printer Wizard appears. Click "Next>". (d)Click "Have Disk" from the next dialog and the "Install from disk" dialog box is displayed prompting the user to select the drive and directory containing the installation disk. (e)Insert the Printer driver installation CD into the CD drive, use the "Browse" button to select the sub-directory mL45\Drivers\pcl\WIN95\ENGLISH of the GENICOM Printer CD and click "OK". (f)A dialog box appears displaying the model-name's "GENICOM Intelliprint mL450 PCL" and "GENICOM LN45 PCL". Select which printer you have. Click "Next>" to continue. (g)A list of available Ports appears. Select an appropriate Port and click "Next>". (h)A dialog appears prompting the user to type the Printer name. Type an appropriate name or use the one supplied and click "Next>". (i)The next dialog prompts the user to print a test page. Select "Yes" or "No" and click "Finish". (j)When all files have been copied and the driver is installed a dialog appears querying the result of test page printout. Depending on whether the test page was printed correctly or not click "Yes" or "No". The GENICOM Intelliprint mL450 / LN45 PCL Windows 95 printer driver is now installed. Microsoft and Windows are registered trademarks of Microsoft Corporation. GENICOM is a registered trademark of GENICOM L.L.C. Copyright 2001, GENICOM L.L.C. All rights reserved.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.