Readme.txt for GENICOM Intelliprint cL160 Windows NT 2000 PCL driver This readme file gives the installation instructions for the GENICOM Intelliprint cL160 Windows NT 2000 PCL printer driver. Initial Installation -------------------- >> Note: If you have already installed a GENICOM Intelliprint cL160 PCL printer driver, you must use the "Re-installation" procedure, described later in this file. 1 Insert the CD-ROM in the appropriate drive on your workstation. 2 In the Windows NT Start>Settings menu, choose Printers. 3 Choose Add Printer. The Add Printer Wizard opens. 4 Choose Next. 5 When prompted, choose the appropriate radio button to identify how the printer is attached to your workstation (Local Printer or Network Printer), and then choose Next. 6 When prompted to select a port to use with the printer, select the appropriate port, and then choose Next. 7 When prompted to select a manufacturer and model of printer, choose Have Disk. 8 Insert the Printer driver installation CD into the CD drive, use the "Browse" button to select sub-directory Software\Drivers\NT40\pcl\ENGLISH of the GENICOM Intelliprint cL160 CD. 9 Click "OK". "GENICOM Intelliprint cL160 PCL" appears. 10 Select the GENICOM printer name and choose Next. 11 When prompted, choose Replace Existing Driver, and then choose Next. 12 When prompted for a printer name, either accept the displayed name or type a new one, and then choose Next. 13 When prompted for sharing information, choose either Shared (and type a Share Name) or Not Shared, and choose Next. 14 When prompted, select the operating systems of ALL computers that will be printing to the printer, and then choose Next. 15 When asked if you'd like to print a test page, choose either Yes or No, and then choose Finish. The printer driver installs, and you're ready to print. Re-installation --------------- If a GENICOM Intelliprint cL160 Windows NT 2000 PCL printer driver has been previously installed, you must use the following procedure to delete the files before installing a new printer driver. 1 Open Windows NT Explorer (from the Start>Programs menu choose Windows NT Explorer). 2 Delete the printer(s) you want to replace or upgrade. 3 Install the new printers using the "Initial Installation" procedure at the beginning of this file. 4 Reboot your workstation. GENICOM on the Internet: http://www.genicom.com Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. GENICOM is a registered trademark of GENICOM L.L.C. Copyright 2000, GENICOM L.L.C. All rights reserved.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.