PKTDRV.TXT Driver File Contents (fa41v200.exe)

\HELP\PKTDRV\PKTDRV.TXT

                NETGEAR FA410TX Fast Ethernet PC Card
                -------------------------------------
                 Packet Drivers Installation Overview
                 ------------------------------------

  Introduction
  ------------
  Packet drivers are general drivers used by many operating
  systems especially TCP/IP software packages.  If the network
  system that is installed specifically mentions support for
  packet drivers, it is likely that it will be able to install
  the provided packet driver without problems.

  The FA410TX Fast Ethernet PC Card Installation diskette
  contains Packet drivers and installation notes for some of
  the most popular operating systems which support Packet
  drivers.

  The most important thing to remember when installing the packet
  driver is the software interrupt vector.  The default interrupt
  vector for packet drivers is 0x62 hexadecimal.  Most network
  operating system supporting packet drivers will try to automatically
  search for packet drivers already loaded in the computer's memory.
  However, some packages will require a provided interrupt vector for
  the packet driver.  Furthermore, some packages can only work with
  certain interrupt vectors, which requires a software interrupt
  vector parameter when loading.  Please see the section below for
  information on packet driver parameters.

  Since the FA410TX Fast Ethernet PC Card is software configurable,
  the packet driver will automatically detect the hardware parameters.
  If the packet driver can properly read the adapter's MAC address
  during loading, the hardware should normally working properly.

      File                 Description
      ----------------     --------------------------------
      PCTCP.TXT            FTP PC/TCP installation document

      FA410.COM [/option] <packet_int_no>


  Packet Driver Parameters :
  --------------------------
      <packet_int_no>      The software interrupt vector number used by
                           the packet driver program.  This can be from
                           96 to 128.

      [/option]            Includes the following:

        /?                 Show available parameters

        /d                 Delay Initial - The driver program will not
                           initialize the network interface card until
                           the packet driver program is accessed by its
                           upper layer program.

        /w                 This parameter is only to be used in the
                           Windows environment.

        /u                 Unload the packet driver.

        /c                 Assign card number for driver.

        /n                 NetWare conversion. Convert 802.3 packets
                           to 8137 packets

        /auto              Auto detect the speed and duplex mode.

        /100f              Set speed to 100M bps and full duplex mode.

        /100h              Set speed to 100M bps and half duplex mode.

        /10f               Set speed to 10M bps and full duplex mode.

        /10h               Set speed to 10M bps and half duplex mode.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.86