CardBus Fast Ethernet Adapter Installation
for SUN PCNFS 5.0
Contents
--------
.Introduction
.Requirements
.Minimum Skill Level
.Getting Started
Introduction
------------
This installation assumes that the PCMCIA drivers are working properly.
Please consult \PCMCIA\README.TXT for help with PCMCIA Drivers. Section
"Getting Started" will describe the installation for Lan Manager.
Requirements
------------
.A PCMCIA compatible Laptop
.SUN PCNFS 5.0 or newer
.A CardBus Fast Ethernet PC Card
.A knowledge of basic DOS commands and editing text files
Minimum Skill Level
-------------------
.A knowledge of basic DOS commands
.A knowledge of editing text files
.A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
.A knowledge of the network driver configuration being used
.Please see Support Options if you are not comfortable will this
skill level
Getting Started
---------------
When using PC-NFS concurrently with NetWare 3.1x/4.0, select the
"ODI" option from the PC-NFS installation screen. This option works
with the ODI driver included in the provided driver diskette. Copy
the files listed below into the \NFS directory of your hard disk.
These files will be used in the installation.
File Description
------------ -----------------------------------------
NFSODI.SYS PC-NFS driver program
CB102.COM ODI driver program
LSL.COM NetWare Link Support Layer
IPXODI.COM NetWare IPX/SPX Protocol
NETX.EXE NetWare Workstation Shell
The following lists the contents of the configuration files:
CONFIG.SYS AUTOEXEC.BAT
---------- ------------
SWITCHES=/F SET TZ=EST5EDT
DEVICE=C:\HIMEM.SYS C:\DOS\SMARTDRV.EXE
DEVICE=C:\EMM386.EXE NOEMS RAM @PROMPT $p$g
DOS=HIGH,UMB PATH=C:\NFS;C:\WINDOWS;C:\DOS;
BUFFERS=10,0 SET TEMP=C:\DOS
FILES=40 SET NFSDRIVE=C
STACKS=0,0 SET NFSPATH=C:\NFS
LASTDRIVE=G SET TN_DIR=C:\NFS\TELNET
SHELL=C:\DOS\COMMAND.COM C:\DOS /P LSL
DEVICE=C:\NFS\PCNFS.SYS /l40 CB102
DEVICE=C:\NFS\SOCKDRV.SYS C:\NFS\PRT *
DEVICE=C:\NFS\NFSODI.SYS /b2 C:\NFS\NET INIT
IPXODI
NETX
NET.CFG
ÄÄÄÄÄÄÄ
Link driver CB102
Frame Ethernet_802.3
Frame Ethernet_II
Protocol IPX 0 Ethernet_802.3
If your Novell FILE SERVER is configured to use the Ethernet_802.3
frame type, add a /b2 switch to the line DEVICE=C:\NFS\NFSODI.SYS
in your CONFIG.SYS file and add an entry in your NET.CFG file
defining the two frames types.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.