================================================================
NOTES ON
Installing D-Link DFE-670TXD Fast Ethernet PC Card
For NCSA Users
================================================================
(c) 2001 Copyright D-Link Corporation ALL RIGHTS RESERVED
This document contains installation notes, which is not included in the
DFE-670TXD Fast Ethernet PC Card USER'S GUIDE or onscreen instructions,
for NCSA users regarding DFE-670TXD Fast Ethernet PC Card installation.
This document contains information on the following topics:
1.0 Introduction
2.0 Installing Pcaket driver
________________________________________________________________________
1.0 Introduction
-----------------
NCSA users please also refer to the following:
----------------------------------------------------------------
File Description/Installation notes
----------------------------------------------------------------
\HELP\PKTDRV\README.TXT For all Packet driver users
2.0 Installing Pcaket driver
-----------------------------
Here are the steps:
1. To load a driver , use either of the following methods:
METHOD 1:
In your CONFIG.SYS file, include the DEVICE command.
Format:
DEVICE = DFE670PD.SYS [/option] <packet_int_no>
METHOD 2:
Issue DFE670PD command at the DOS command prompt.
Format:
DFE670PD.COM [/option] <packet_int_no>
2. you need to install NCSA TCP/IP distributions into your
computer. (Also refer to NCSA TCP/IP distributions \INSTALL
for more information.)
3. Please set correct values in CONFIG.TEL which is
included in NCSA TCP/IP distributions as follows:
CONFIG.TEL
----------
:
:
hardware = packet
ioaddr = <iobase>
interrupt = <irq>
:
:
Please take note the above settings must be the same as
driver's parameters.
Now, the NCSA TCP/IP associated programs are ready to be used.
Example:
--------
> DFE670PD.COM 0x62
> EDIT CONFIG.TEL
:
hardware = packet
ioaddr = <iobase>
interrupt = <irq>
:
> TELNET <IP_ADDRESS>
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.