1. dfe670TXD_drivers_022001.zip Driver
2. NW312.TXT File Contents

NW312.TXT Driver File Contents (dfe670TXD_drivers_022001.zip)

================================================================
NOTES ON
Installing D-Link DFE-670TXD Fast Ethernet PC Card
For NetWare Server 3.12 Driver Users
================================================================
    (c) 2001 Copyright D-Link Corporation ALL RIGHTS RESERVED


This document contains DFE-670TXD Fast Ethernet PC Card installation notes,
which is not included in the DFE-670TXD Fast Ethernet PC Card USER'S GUIDE
or onscreen instructions, for NetWare Server 3.12 Driver users.


This document contains information on the following topics:

1.0   Overview
2.0   Installation notes for NetWare Server 3.12 Driver users
3.0   Keywords supported by DFE670
________________________________________________________________________

1.0  Overview
-------------
    Please also refer to the INST_DOS.TXT file on the DFE-670TXD
    Installation disk.


2.0  Installation Note for NetWare Server 3.12 Driver users
-----------------------------------------------------------
  ******************************************************************
  * Notes: The PC Card should be enabled by Card service.          *
  *        Please run DFCD.EXE before starting the server.         *
  *                                                                *
  *        Content of CONFIG.SYS                                   *
  *        ---------------------                                   *
  *        Add below item to the  CONFIG.SYS                       *
  *                                                                *
  *        DEVICE=<PATH>\DFCD.EXE /iop=300 /irq=11                 *
  *        ; <PATH> is a directory include DFCD.EXE file.          *
  *        ; Please refer to the INST_DOS.TXT for details.         *
  ******************************************************************

    Modifying an existing NetWare 3.12 Server
    -----------------------------------------
        1. Make a sub-directory NLMS.OLD under <SRVPATH> directory which
           include SERVER.EXE.

            Ex. <SRVPATH> = SRV312.
                >MD \SRV312\NLMS.OLD

        2. Save NBI.NLM, MSM.NLM and ETHERTSM.NLM to NLMS.OLD sub-directory.

        3. Please insert release driver diskette into disk drive.

        4. Copy all provided NLM and LAN files into your DOS directory
           which include SERVER.EXE, and rename NBI31X.NLM and MSM31X.NLM:

            Ex. >COPY D:\NETWARE\SERVER\NW312\NBI31X.NLM C:\SRV312\NBI.NLM
                >COPY D:\NETWARE\SERVER\NW312\MSM31X.NLM C:\SRV312\MSM.NLM
                >COPY D:\NETWARE\SERVER\NW312\ETHERTSM.NLM C:\SRV312
                >COPY D:\NETWARE\SERVER\NW312\DFE670.LAN C:\SRV312

        5. Start the NetWare Server.

            >CD \SRV312
            >SERVER

        6. From the Novell Server side, execute "LOAD INSTALL". By typing
           :LOAD INSTALL
            Select <System Option>
            Select <Edit Autoexec.NCF file>

        7. Add the item below into the server's AUTOEXEC.NCF file.

           Search Add C:\SRV312

           LOAD NBI.NLM
           LOAD MSM.NLM
           LOAD ETHERTSM.NLM

           LOAD DFE670 PORT=300 INT=11 FRAME=Ethernet_802.3 NAME=DFE670_1_E83
           BIND IPX DFE670_1_E83 NET=xxxx

           LOAD DFE670 PORT=300 INT=11 FRAME=Ethernet_802.2 NAME=DFE670_1_E82
           BIND IPX DFE670_1_E82 NET=xxxx

           LOAD DFE670 PORT=300 INT=11 FRAME=Ethernet_II NAME=DFE670_1_EII
           BIND IPX DFE670_1_EII NET=xxxx

           LOAD DFE670 PORT=300 INT=11 FRAME=Ethernet_SNAP NAME=DFE670_1_ESP
           BIND IPX DFE670_1_ESP NET=xxxx

        8. Restart the server.

  ******************************************************************
  * Notes: The PC Card should be enabled by Card service.          *
  *        Please run DFCD.EXE before start server.                *
  *                                                                *
  *        > DFCD /iop=300 /irq=11                                 *
  ******************************************************************


3.0  Keywords supported by DFE670
---------------------------------
    TP              - This keyword specifies that the UTP port on the
                      adapter.

    TP_FULL_DUPLEX  - This keyword selects twisted pair connection to
                      work in full duplex mode.

    LINE_SPEED      - This keyword selects line speed between 10Mbps and
                      100Mbps on network cards.

                      Allowed values are: 10,100

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.