================================================================
NOTES ON
Installing D-Link DFE-670TXD Fast Ethernet PC Card
For Client 32 for Windows 95 and DOSWIN Users
================================================================
(c) 2001 Copyright D-Link ALL RIGHTS RESERVED
This document contains DFE-670TXD Fast Ethernet PC Card installation
notes, which is not included in the DFE-670TXD Fast Ethernet PC Card
USER'S GUIDE or onscreen instructions, for Client 32 for Windows 95
and DOSWIN users.
This document contains information on the following topics:
1.0 Overview
2.0 Installation Notes For Client 32 for DOSWIN users
2.1 Windows 3.x Users
2.2 DOS Users
________________________________________________________________________
1.0 Overview
-------------
To install DFE-670TXD in the Client 32 for Windows 95 environment,
you should have the Windows 95 CD-ROM and the NOVELL Client 32
CD-ROM nearby.
2.0 Installation Notes for Client 32 for DOSWIN users
------------------------------------------------------
*******************************************************************
* Notes: The PC Card should be enabled by Card services. *
* Please run DFCD.EXE before starting Client 32 for DOSWIN.*
* *
* Content of CONFIG.SYS *
* --------------------- *
* Add below two lines to the CONFIG.SYS file *
* *
* DEVICE=C:\DOS\EMM386.EXE NOEMS X=D000-D7FF *
* DEVICE=<PATH\DFCD.EXE /iop=300 /irq=11 *
* ; <PATH> is a directory that includes the DFCD.EXE file. *
* ; Please refer to the INST_DOS.TXT file for details. *
*******************************************************************
2.1 Windows 3.x Users
----------------------
1. Start Windows 3.x system
2. Run the Client 32 for DOSWIN installation program, using SETUP.EXE
Example: >CD \<PATH> ; <PATH> is Client 32 for DOSWIN
>SETUP.EXE
or
Double click SETUP.EXE in Files Manager windows
3. Press ENTER to accept the agreement.
4. Specify your target directory.
Example: C:\NOVELL\CLIENT32 ; If you had chosen the C drive.
5. Click "Other Boards..."
6. Please insert release driver diskette into the disk drive.
7. Specify the full path of the driver, i.e. D:\<PATH>.
Example: D:\NETWARE\CLIENT32\DFE670.LAN
8. Select "D-Link DFE-670TXD Fast Ethernet PC Card Driver".
9. Specify your configuration for Additional Optional window
then click "Next>" to continue.
10. Restart your workstation, click "NetWare Login" to login to the
NetWare server from NetWare Tools.
11. Keywords supported by DFE670
Connection Type - This keyword specifies that the duplex mode and
line speed on network cards.
2.2 DOS Users
--------------
1. Run the Client 32 for DOSWIN installation program, using INSTALL.EXE.
Example: >CD \<PATH> ;<PATH> is Client 32 for DOSWIN
>INSTALL.EXE
2. Press ENTER or YES to accept the agreement.
3. Select "NetWare Client 32 for DOS".
4. Use default value in Customize Support for Windows
if you Select "NetWare Client 32 for Windows", as well.
5. Press "F10" to continue.
6. Select "32-bit LAN drivers" from LAN Driver Type window.
7. Select "USER SPECIFIED 32 BIT DRIVER".
8. Please insert release driver diskette into the disk drive.
9. Specify the full path of the driver, i.e. D:\<PATH>.
Example: D:\NETWARE\CLIENT32
10. Select "D-Link DFE-670TXD Fast Ethernet PC Card Driver" from
32-Bit Network Board Drivers window.
11. Specify "Connection Type", "Driver Retries", "Frame Type" and
"Node Address" setting, then press "F10" to save.
Example: Default value is as below
Frame Type is Ethernet_802.2
Slot is 1
12. Press "F10" to continue in Installation Configuration Summary
window, if you accept.
13. AUTOEXEC.BAT and CONFIG.SYS will be update after installation.
14. Restart your workstation and load the NetWare networking
software; it will connect to the Netware server.
15. Keywords supported by DFE670
Connection Type - This keyword specifies that the duplex mode and
line speed on network cards.
******************************************************************
* Notes: The PC Card should be enabled by Card service. *
* Please run DFCD.EXE before starting Client 32 for DOSWIN.*
* *
* > DFCD /iop=300 /irq=11 *
******************************************************************
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.