================================================================
NOTES ON
Installing D-Link DFE-670TXD Fast Ethernet PC Card
for NDIS Users
================================================================
(c) 2001 Copyright D-Link Corporation ALL RIGHTS RESERVED
This document contains installation notes, which is not included in the
DFE-670TXD Fast Ethernet PC Card USER'S GUIDE or onscreen instructions,
for NDIS users regarding DFE-670TXD Fast Ethernet PC Card installation.
This document contains information on the following topics:
1.0 Introduction
2.0 Installation Notes
3.0 PROTOCOL.INI keywords Available
________________________________________________________________________
1.0 Introduction
-----------------
The DFE-670TXD Fast Ethernet PC Card Installation diskette contains NDIS
driver programs, which comply with Microsoft's NDIS v2.0.1
specification, and installation notes for some of the most popular
operating systems which support NDIS drivers.
2.0 Installation Notes
-----------------------
NDIS users, please refer to the following.
------------------------------------------------------------------------
File Description/Installation Notes
------------------------------------------------------------------------
\README.TXT Overall installation notes for all users
\HELP\NDIS2DOS\README.TXT Overall installation notes for all NDIS
users
\HELP\NDIS2DOS\MSCLIENT.TXT For MSCLIENT users
\HELP\NDIS2DOS\LANTASTIC.TXT For LANTASTIC users
3.0 PROTOCOL.INI keywords Available
------------------------------------
This guide lists the available PROTOCOL.INI keywords.
IOADDRESS - This keyword specifies the I/O base address used by
the adapter. This value must match the actual address
setting on the adapter. If this keyword is not
specified, the default value(0x300) will be put into
effect.
INTERRUPT - This keyword specifies the interrupt line used by the
adapter. This value must match the actual IRQ setting
on the adapter. If this keyword is not specified, the
default value (11) will be put into effect.
DRIVERNAME- This keyword specifies the driver name for the
adapter.
NETADDRESS- This keyword specifies the node address (in hex) used
by the adapter. This option is used only to override
the node address stored in the adapter. With this
keyword specified, the specified address will be used
instead of the adapter's actual node address.
CONNECTION- This keyword specifies the connector that used by the
adapter. The default value is AUTOSENSE.
= AUTOSENSE : Adapter will auto detect the speed mode
and duplex mode.
= MB100_Full : User force the media to 100BASE-TX FULL
DUPLEX mode.
= MB100_Half : User force the media to 100BASE-TX HALF
DUPLEX mode.
= MB10_Full : User force the media to 10BASE-T FULL
DUPLEX mode.
= MB10_Half : User force the media to 10BASE-T HALF
DUPLEX mode.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.