wwdslcfg.ini Driver File Contents (1010003e.zip)

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; WWDSLCFG.INI
;;
;; Copyright 2000-2002 GlobeSpanVirata, Inc.
;;
;; Contains custimization parameters for the GlobeSpan ADSL Setup application.
;; This file must reside in the Windows Directory.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

[SystemInfo]
Version=2.2.4

; 1 if a choice of languages should be displayed, 0 if the language should
; be automatically detected
PromptForLanguage = 0

; A comma delimited list of languages that are supported.  The first
; language in the list will be the default language.
SupportedLanguages = ENGLISH,CHINESE_SIMP,CHINESE_TRAD,FRENCH,GERMAN,ITALIAN,JAPANESE,KOREAN,PORTUGUESE,SPANISH,DANISH,DUTCH

; Location of registry key where setup information will be stored
SetupSoftwareKey=GlobespanVirata\Adsl

; Location of installed program files, if any, on the windows drive
ProgramFilesDir=\Program Files\GlobespanVirata\Adsl

; Name in start menu and control panel add/remove 
ProductName=GlobespanVirata DSL Modem

; PCI or USB
HardwareType=USB

; HardwarePlatform can be: ANCHOR, QUASAR, IAD, PULSAR, PANDA, HELIUM
HardwarePlatform=IAD

; Vendor and Device ID (matches ID's programmed into device).  Separate
; multiple values by commas to support multiple device codes
; Must prepend class (USB\ or PCI\) 
UsbCtrlrId=USB\VID_0915&PID_0005,USB\VID_0915&PID_8005
ModemId=

; If 1, then enables the upgrade feature.  If enabled, the installer will check
; for an existing installation before installing, and ask the user if they want
; to upgrade or downgrade.  If disabled, the user will be instructed to remove 
; the existing driver and reinstall.
EnableUpgrade=0

; If 1, then the first channel detected by autoConfig will be used.  If 0,
; then if multiple channels are detected, the user will be able to pick 
; the desired channel from a list.
SkipDetectResultsScreen=0

; If 1, welcome screen will be skipped.  If 0, it will be shown.
SkipWelcomeScreen=0

; If 1, license agreement screen will be skipped.  If 0, it will be shown,
; and will use the license.txt 
SkipLicenseScreen=0

; If 1, the ISP selection screen will be skipped, and if 0, it will be shown.
; If skipped, the parameters will be obtained from the Default section.
SkipIspSelectionScreen=1

; If 1, the summary screen will be skipped, and if 0, it will be shown.
SkipSummaryScreen=1

; If 1, the finished screen will be skipped, and if 0, it will be shown.
SkipFinishedScreen=0

; This string must match the caption of the control panel window
CplWindowName=GlobespanVirata DSL Modem

; Create a shortcut in the start menu to the control panel (1 is enable, 0 is disable)
CreateCplStartMenuShortcut=0

; Create uninstall and configure icons in the start menu
CreateUninstallIcon=1
CreateConfigureIcon=0

; If set to 0, there will be no reboots during installation on Win2k.  
; However, the TCP window size will not be set properly without a reboot.
; If set to 1, the system will be rebooted after installation.
Win2kReboot=0

; The following values will specify which files get spawned when the user
; clicks the various help buttons.  The values that end in "File" specify
; the name of the file that will get spawned.  These files must reside in
; the ProgramFiles directory.  The values that end in "Params" will 
; pass the specified string as an argument to the file.  To disable this
; feature, erase everything after the equal signs, and remove the help
; button from maintenance window in the resource file.
; 
; In the following, HelpMaintenance is for the maintenance dialog box
; that is shown when the start menu icon is clicked.  IspSelect is for
; the ISP selection screen.  DriverType is for the driver selection screen.
; Settings is for the communication settings dialog.

HelpConfigTypeFile=
HelpConfigTypeParam=
HelpDetectFile=
HelpDetectParam=
HelpDetectErrorFile=
HelpDetectErrorParam=
HelpDetectResultsFile=
HelpDetectResultsParam=
HelpDriverTypeFile=
HelpDriverTypeParam=
HelpDrvTypeFile=
HelpDrvTypeParam=
HelpErrorFile=
HelpErrorParam=
HelpFinishedFile=
HelpFinishedParam=
HelpInstallFile=
HelpInstallParam=
HelpIspSelectFile=
HelpIspSelectParam=
HelpLicenseFile=
HelpLicenseParam=
HelpRebootFile=
HelpRebootParam=
HelpRemoveFile=
HelpRemoveParam=
HelpSettingsFile=
HelpSettingsParam=
HelpShutdownFile=
HelpShutdownParam=
HelpSummaryFile=
HelpSummaryParam=
HelpWelcomeFile=
HelpWelcomeParam=

; The minimum VCI value that the configuration dialog box will accept
MinVci=32
MaxVci=65535

; Specifies if the "Other Isp" item will be added to the ISP list
ShowOtherIspChoice = 1

; If the "Other Isp" item is shown in the ISP list, this specifies if it
; should be placed at the beginning or the end of the list
OtherIspAtEnd = 0

EnableHardDriveDma = 0

; A comma-deliminated list of file names.  Each file will be removed
; from the windows system directory during uninstall.  On 2k these files
; will also be removed during reboot in case they were locked by the OS.
RemoveFromWinSysDir=

; This value determines the reboot behavior in Win95.  Possible values are:
; SHUTDOWN - System prompts for a shutdown (recommended)
; REBOOT - System prompts for a reboot
Win95RebootMode = SHUTDOWN

; If set to 1, this flag will reboot the system without showing
; a prompt first (during installation).  Prompts to shutdown are still shown.
SuppressRebootPrompts = 0

; This flag determines if the setup wizard's bitmap is transparent.
; If 1, it is transparent and the upper-left-hand corner pixel will be used
; as the transparent color.  If 0, the bitmap will be solid.
MakeInstBmpTransparent = 1

; The VPI/VCI is usually communicated to the driver through the phone number
; in dialup networking (for wan and atm).  If this flag is set to 1, 
; the phone number is ignored, and the VPI/VCI will give the driver the values
; through the registry.
IgnoreDialupPhoneNumber = 0

; This flag determines if the installer will disable the driver certification 
; warning on Windows 2000 and WinXp.
; 1 - The warnings will be suppressed
; 0 - The warnings will not be suppressed
DisableWin2kWarning = 0

; This value sets the driver's frame size if PPPoE encapsulation is selected.
PppoeFrameSize = 1492

; This value will cause the installer to exit after it installs the driver
; files but before the plug and play process occurs.  This is useful if
; the USB cable will not necessarily be plugged in at installation time.
ExitBeforePnP = 0

; If InstallSilently is set to 1, no GUI is shown to the user while installing.  
; This feature is intended for use when this installer is being called by 
; another application with its own GUI.  Another way to set this mode is to 
; run setup.exe with the command line parameter -s (setup.exe -s).
InstallSilently = 0

; Comma-delimited list of sections that describe a start-menu icon.  
; Each icon will point to a file installed in the program files directory
StartMenuIconSections=StartMenuSampleDoc

; Comma-delimited list of ISP sections.  Do not include IspDefault.
IspSections=IspAOL,IspGlobeSpanWanA,IspGlobeSpanPppoe,IspGlobeSpanLanA,IspGlobeSpanAtmA

Debug=ERROR

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; Any value in the DriverRegistryValues section will be copied to the
; registry area of the network driver and be written as a string value.
[DriverRegistryValues]

; Vendor ID transmitted in EOC status request (in hex)
VendorId=39

; Allow the user to enter control panel's debug mode (1 is enable, 0 is disable)
CplDebugMode=1

; This flag determines if the company logo in the control panel is transparent.
; If 1, it is transparent and the upper-left-hand corner pixel will be used
; as the transparent color.  If 0, the company logo will be solid.
IsLogoTransparent = 0


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

[StartMenuSampleDoc]

; File in ProgramFilesDir to point to
FileName=DslStatus.exe

Description=DSL Status

; 1 if a shortcut should be created on desktop
ShortcutToDesktop=0


; -------------------------------------------------------------------------
;                              ISP DESCRIPTIONS
; -------------------------------------------------------------------------

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ; Description of fields:
;;
;; ; DriverLocation points to a directory under PCI or USB.  This must match
;; ; the directory name exactly.
;; ; Default directory names are (under drivers):
;; ; WAN Driver
;; ; ATM Driver
;; ; LAN Driver
;; DriverLocation=WAN Driver
;;
;; ; Default VPI/VCI
;; VPI=0
;; VCI=88
;;
;; ; Layer 3 Protocol
;; ; 1 - RFC 1577 Classical IPoATM (Lan Driver only)
;; ; 2 - RFC 1483 IPoATM Bridged LLC Encapsulation (Lan Driver only)
;; ; 3 - RFC 1483 IPoATM Bridged VC Encapsulation (Lan Driver only)
;; ; 4 - RFC 1483 IPoATM Routed LLC Encapsulation (Lan Driver only)
;; ; 5 - RFC 1483 IPoATM Routed VC Encapsulation (Lan Driver only)
;; ; 6 - RFC 2364 PPPoATM LLC Encapsulation (WAN and ATM Drivers only)
;; ; 7 - RFC 2364 PPPoATM NULL Encapsulation (WAN and ATM Drivers only)
;; ; 8 - RFC 2516 PPPoE Encapsulation (WAN USB Driver only)
;; Layer3Protocol=7
;;
;; ; Modulation
;; ; 0 - T1.413
;; ; 1 - G.Lite
;; ; 2 - G.DMT
;; ; 4 - Multimode
;; ; 14 - Alcatel Annex-B
;; Modulation=4
;;
;; ; Displayed in service provider selection drop list
;; Description=GlobespanVirata
;;
;; ; Show a status icon in the system tray (1 shows icon, 0 doesn't)
;; ShowSysTrayIcon=1
;;
;; ; If a file is specified here, it will be executed after the installation
;; ; process finishes.  The file must be located in the ProgramFiles directory
;; ; of the installation media.  If no file is present, nothing will be executed.
;; RunOnExit=myapp.exe
;;
;; ; If 1, a dial-up icon will be created for this ISP.  If 0, no dial-up
;; ; icon will be created.
;; CreateDialup=1
;;
;; ; Name that is shown for the dial-up icon, if created.
;; DialUpName=GlobespanVirata Dial-Up PPP Connection
;; 
;; ; If 1, a shortcut to the dial-up icon will be created on the desktop.
;; ; If 0, no shortcut will be created.
;; CreateDialupDeskShortcut=1
;;
;; ; If 1, a shortcut to the dial-up icon will be created in the start menu.
;; ; If 0, no shortcut will be created.
;; CreateDialupMenuShortcut=0
;;
;; ; Specifies an icon for the shorcut to the dial-up networking.  A value
;; ; of -1 specifies the default icon to be used.  Any other value specifies
;; ; an icon located in the language dll.  0 means the first icon in the dll.
;; DialupShortcutIconIndex=-1
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; The default ISP section is used if the user selects "Not Listed" from ISP
; list.  Some values here are also used for autoconfig.
[IspDefault]
DriverLocation=LAN Driver
VPI=0
VCI=88
Layer3Protocol=2
Modulation=4
Description=GlobespanVirata
CreateDialup=0
ShowSysTrayIcon=0
RunOnExit=
DialUpName=GlobespanVirata Dial-Up PPP Connection
CreateDialupDeskShortcut=1
CreateDialupMenuShortcut=0
DialupShortcutIconIndex=-1

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[IspAOL]
DriverLocation=LAN Driver
VPI=0
VCI=88
Layer3Protocol=2
Modulation=4
CreateDialup=1
ShowSysTrayIcon=1
RunOnExit=
Description=America Online (Example)
DialUpName=AOL Dial-Up PPP Connection
CreateDialupDeskShortcut=1
CreateDialupMenuShortcut=0
DialupShortcutIconIndex=-1

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[IspGlobeSpanWanA]
DriverLocation=WAN Driver
VPI=0
VCI=88
Layer3Protocol=7
Modulation=4
Description=GlobespanVirata WAN (PPPoA)
CreateDialup=1
ShowSysTrayIcon=1
RunOnExit=
DialUpName=GlobespanVirata Dial-Up PPP Connection
CreateDialupDeskShortcut=1
CreateDialupMenuShortcut=0
DialupShortcutIconIndex=-1

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[IspGlobeSpanPppoe]
DriverLocation=WAN Driver
VPI=0
VCI=36
Layer3Protocol=8
Modulation=4
Description=GlobespanVirata WAN (PPPoE)
CreateDialup=1
ShowSysTrayIcon=1
RunOnExit=
DialUpName=GlobespanVirata Dial-Up PPP Connection
CreateDialupDeskShortcut=1
CreateDialupMenuShortcut=0
DialupShortcutIconIndex=-1

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[IspGlobeSpanLanA]
DriverLocation=LAN Driver
VPI=0
VCI=35
Layer3Protocol=2
Modulation=4
Description=GlobespanVirata LAN
CreateDialup=0
ShowSysTrayIcon=1
RunOnExit=
DialUpName=GlobespanVirata Dial-Up PPP Connection
CreateDialupDeskShortcut=1
CreateDialupMenuShortcut=0
DialupShortcutIconIndex=-1

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[IspGlobeSpanAtmA]
DriverLocation=ATM Driver
VPI=0
VCI=88
Layer3Protocol=7
Modulation=4
Description=GlobespanVirata ATM (PPPoA)
CreateDialup=1
ShowSysTrayIcon=1
RunOnExit=
DialUpName=GlobespanVirata Dial-Up PPP Connection
CreateDialupDeskShortcut=1
CreateDialupMenuShortcut=0
DialupShortcutIconIndex=-1

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.62