Flash EPROM for AMIBIOS Management & Updating Procedures
Upon first use of the computer system:
1. Create a bootable system floppy diskette by typing [FORMAT A:/S] from the
DOS prompt without "AUTOEXEC.BAT" and "CONFIG.SYS" files.
2. Copy FLASH821.EXE to your new diskette.
3. Restart your system ,Run FLASH821.EXE from your new diskette
Flash EPROM Programming Utility
Copyright (C)1998 American Megatrends Inc. All Rights Reserved. Ver.8.21.00
============================================================================
Usage: FLASH821 ROM_FILE /<COMMAND1> /<COMMAND2> .....
Sample: FLASH821 AMIBIOS.ROM /A -> Auto Detecting&Programming flash ROM
============================================================================
?|H : Help
A[+] : A = Auto detecting&Programming flash ROM under Command line.
A+ = Auto detecting&Programming flash ROM under User interface.
B : To force Boot Block Programming.
C : Load BIOS CMOS default values without warning the user about
any configuration change.
D : Clear passwords during loading CMOS defaults.
E : Clear CMOS after programming done.
G : GPNV data area reserving.
I : Identification BIOS file is right for this system or not.
N : To force NVRAM programming.
O : Flash functions call from BIOS file.
P : To make <Security> item visible.
Q : Update BIOS without any message.
R : Force reboot after programming done.
S<File_name> : To save Flash ROM data into file AND quit.
T<RetryNumber> : Retry if programming fails. The <RetryNumber> can be 0 - 65535
. This function is only for command line mode.
U<File_name> : To update utility's modules data.
V : Verify BIOS checksum.
X : Enter utility's user interface without system checking.
-<Options> : Disable flags
<Options>
[B]/[C]/[D]/[E]/[G]/[I]/[N]/[O]/[R]/[V]
============================================================================
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.