[+******************************************************************+]
[ DAVICOM Semiconductor Inc. ]
[ DM9 Series PCI Ethernet Adapter ]
[ SROM/MAC/PHY/PCI Read/Write Program Guide ]
[ ]
[ (C) Copyright 1997-2000 DAVICOM Semiconductor Inc. ]
[ All Rights Reserved. ]
[-******************************************************************-]
Files Description :
===================
\REG91X\REG91X.EXE DM910X SROM/MAC/PHY/PCI Read/Write Program
\REG91X\REG91X.TXT This File.
DM910X SROM/MAC/PHY/PCI Read/Write Program :
============================================
This program supports to display DM910X adapter information,
and to read/write the SROM Contents, the MAC Registers, the MII PHY
Registers and the PCI Configuration Registers functions.
The Main Menu Functions are :
1. Display Adapter Information
2. Read/Write SROM (EEPROM) Contents
3. Read/Write MAC Registers
4. Read/Write PHY Registers
5. Read/Write PCI Configuration Registers
6. Exit
The Function Keys are :
PGUP,PGDOWN : Select Card #01..#04
F1 : Display SROM/MAC/PHY/PCI Help Message
F2 : Save the new value to SROM/MAC/PHY/PCI
F3 : Reload the value from SROM/MAC/PHY/PCI
PGDOWN : Switch the Page of the SROM Data (ONLY for SROM)
P,p : Change PHY Address (ONLY for PHY)
ESC : Exit to Main Menu
The program supports the following parameters :
Syntax : REG91X [/r] [/p PHYAddress] [/h]
/r : Reset MAC/PHY and reload EEPROM
/p : Specify the PHY Address (Default 1)
/h : Display Help Message
<<< NOTICE !!! >>>
1. This program supports multi-cards SROM/MAC/PHY/PCI Read/Write
function and DON'T check the PCI Vendor ID/Device ID of
the adapters, so please check by yourself that ONLY
the DM9102 adapters on your machine, if you have installed
other adapters, please Quit this program and Power OFF your
machine to remove these adapters.
2. You can use the SubVendorID and SubDeviceID fields to
assign the Sub-System Vendor ID and Device ID.
3. You can use the PCIVendorID, PCIDeviceID and NCE_AutoLoad
fields to override the DM9102(A) default PCI Vendor ID (1282h)
and Device ID (9102h).
(When you specify the PCIVendorID and PCIDeviceID fields,
the NCE_AutoLoad field MUST set 000Ah to enable the PCI
Vendor ID & Device ID Auto-load function, otherwise
the setting will be NO MEANING and used default values.)
4. The PMCSR_PMC and NCE_AutoLoad fields can be used for Power
Management Function.
(When you specify the PMCSR_PMC field, the NCE_AutoLoad field
MUST set 00A0h to enable the PME/PMC/PMCSR Auto-load function,
otherwise the setting will be NO MEANING and used default
values.)
5. After the SROM data was written to EEPROM completely,
the program will auto-reload the SROM data from EEPROM to
PCI configuration register. (only for DM9102A chip)
(The reload function is ONLY for DM9102A chip, you MUST
HARDWARE RESET the machine to take the change effect
for DM9102 chip.)
6. The details can be referred to the DM910X SROM Format Specific
and the DM910X MAC/PHY/PCI Data Sheet.
<<< End of file >>>
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.