***********************************************************************
WINDOWS NT DRIVER SETUP INFORMATION For Blade 3D 9880
***********************************************************************
Windows NT Device Drivers (6.50.5452-95icd) July 4, 2000
***********************************************************************
Contents
1.0 Introduction
2.0 Installation Notes for Windows 9x
*****************************
1.0 Introduction
This Accelerated Driver runs on the following products:
Trident Blade 3D PCI/AGP local bus adapter
The Graphics Device Drivers supplied here are for the Microsoft
Windows 95 and 98 operating system.
*****************************
2.0 Installation Notes for Windows 9x
Procedure:
1. Run the Windows 9x display Setup program located in the Control Panel,
Select Display Icon. Double click it to bring up Display Property page.
Select "Settings" Tab on the Display Property page.
2. Click "Display Type or advanced..." button from the Display Settings options.
3. Click "adaptor" tab from Trident Properties
4. Cick next and select "Display a list of all the driver......"
5. Select "Change..." button from the Display Type options.
5. Select "Have Disk..." button from the Select Device options.
6. Windows 9x will prompt you for the correct path where the driver is saved.
7. Restart Windows 9x. Windows 9x will start up with default mode
using the Trident drivers.
8. Choose desired resolution, color depth and refresh rate from the
Display Setting applet, and restart Windows 9x.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.