** ** ** VIA Rhine Family Fast Ethernet Adapter ** ** PXE BOOTROM for Netware and Windows NT ** ** v2.07 May, 2002 ** ** Introduction: ============= This document shows you how to install PXE Bootrom for PCI ethernet adapter in Windows NT Server 3.5, 3.51, 4.0. Contents of the Subdirectory: ============================= PXE.TXT This file. PXE.LOM The bootrom binary file for Lan On Motherboard. PXE.NIC The bootrom binary file for Network Interface Card. Installation: ============= Before starting the installation process, make sure that the adapter is properly installed and configured. You can use the diagnostic program (A:\SETUP.EXE) to make sure your connection with the network is correct. There are two method to boot. 1.After POST of BIOS, PXE will waiting a short time to change boot method. If user strike <ESC> key, PXE will show some advenced prompts as following: 1 - Disable Network Boot 2 - Network Boot Using Interrupt 18h 3 - Network Boot Using Interrupt 19h 4 - Network Boot Using PnP/BEV (BBS) Press 1, 2, 3 or 4:', NUL 2.If user enter any option, PXE will write back into EEPROM. 3.If no <ESC> key, PXE will load EERPOM default into MAC register. BootROM will read the EEPROM CFGA[4,3] as boot option bits. CFGA[4,3] = 0,0 => Network Boot Using Interrupt 19h (Default value) 0,1=> Network Boot Using Interrupt 18h 1,0=> Disable Network Boot 1,1=> Network Boot Using PnP/BEV (BBS) A.'Network Boot Using Interrupt 19h' This options is chosen to boot network by hooking INT 19. Since INT 19 is booting vector, our device is alway chosen to boot regardless of IPL priority. B.'Network Boot Using Interrupt 18h' This options is chosen to boot from network by hooking INT 18h. Since INT 18h is boot recovery vector, so only after other local devices with higher IPL prioirty failed to boot successfully then we may boot. C.'Disable Network Boot' This option is chosen to boot from local devices, not to boot from network.ector, our device is alway chosen to boot regardless of IPL priority. D.'Network Boot Using PnP/BEV (BBS)' This options is chosen to boot network by PnP/BEV. Whether to boot or not according IPL priority. The proiority for IPL devices is configurable by the user by editing the IPL Priority in BIOS Setup.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.