SI3114.inf Driver File Contents (3114_x86_win-idvr-1205.zip)

; This INF file installs the Silicon Image Serial ATA non-Raid driver
; for the SiI 3114 controller on systems running Windows 98/ME,
; Windows NT 4.0, Windows 2000/XP and Windows Server 2003.
;
; Copyright (C) 2003 by Silicon Image, Inc.
; All rights reserved

[Version]
Signature="$Chicago$"
Class=SCSIAdapter
ClassGuid={4D36E97B-E325-11CE-BFC1-08002BE10318}
Provider=%SI%
CatalogFile=SI3114.cat
DriverVer=09/03/2003, 1.2.0.5


[SourceDisksNames]
1="Silicon Image SiI 3114 SATALink Driver Installation Disk",SI3114.sys,,

[SourceDisksFiles]
SI3114.sys	= 1
SI3114.mpd	= 1
SiiSupp.vxd	= 1
SilSupp.cpl	= 1
SiWinAcc.sys	= 1

[DestinationDirs]
DefaultDestDir	= 12
DllFiles		= 11

[DriverFiles_9X]
SI3114.mpd,,,0x20
SiiSupp.vxd,,,0x20

[DriverFiles_NT_2K]
SI3114.sys,,,0x20

[DriverFiles_XP]
SI3114.sys,,,0x20
SiWinAcc.sys,,,0x20

[DllFiles]
SilSupp.cpl,,,0x20

[Manufacturer]
;;;%SI%=SI_HDC
%SI%=SI_HDC,NTx86.5.1

[SI_HDC]
%PCI\VEN_1095&DEV_3114.DeviceDesc%=SI_3114, PCI\VEN_1095&DEV_3114&SUBSYS_31141095

[SI_HDC.NTx86.5.1]
%PCI\VEN_1095&DEV_3114.DeviceDesc%=SI_3114_XP, PCI\VEN_1095&DEV_3114&SUBSYS_31141095


;; Win9x install section
;;
[SI_3114]
DriverVer=9/03/2003, 1.2.0.5
Copyfiles=DriverFiles_9X, DllFiles
AddReg = ios, win98.reg, Win98ProblemDeviceList, Win98SupportedSubSystemIds


;; Windows NT4.0 and Windows 2000 install sections
;;
[SI_3114.NTX86]
Copyfiles=DriverFiles_NT_2K, DllFiles

[SI_3114.NTX86.Services]
AddService=SI3114,0x00000002,SI_3114_Service_Install, Miniport_EventLog_Inst

[SI_3114.NTX86.CoInstallers]
AddReg = SI_3114_CoInstall_AddReg



;; Windows XP install sections
;;
[SI_3114_XP]
Copyfiles=DriverFiles_XP, DllFiles

[SI_3114_XP.Services]
AddService=SI3114,0x00000002,SI_3114_Service_Install, Miniport_EventLog_Inst
AddService=SiFilter,0x000000002,FilterService_Install

[SI_3114_XP.CoInstallers]
AddReg = SI_3114_CoInstall_AddReg



[SI_3114_CoInstall_AddReg]
HKR,,CoInstallers32,0x00010000,"SilSupp.cpl, CoInstHandler"

[SI_3114_Service_Install]
DisplayName=%SI3114.SvcDesc%
ServiceType=1
StartType=0
ErrorControl=1
ServiceBinary=%12%\SI3114.sys
LoadOrderGroup=Scsi miniport
AddReg=PnPSupport_AddReg
AddReg=ProblemDeviceList_AddReg
AddReg=SupportedSubSystemIds_AddReg


[FilterService_Install]
DisplayName=SATALink driver accelerator
ServiceType=1
StartType=0
ErrorControl=0
ServiceBinary=%12%\SiWinAcc.sys
LoadOrderGroup=Filter


; Mark device as supporting Plug & Play on the PCI(5) bus.
[PnPSupport_AddReg]
HKR,Parameters\PnPInterface,5,0x00010001,1


; List of devices with known configuration issues.
[ProblemDeviceList_AddReg]
HKR,ProblemDevices
HKR,ProblemDevices, %ProblemDev1Name%, 0, %ProblemDev1Value%


; List of controller subsystem IDs to be supported by the SI3114.sys driver on
; NT/Win2K/XP systems.
[SupportedSubSystemIds_AddReg]
HKR,SupportedSubsystemIDs,%PCI\VEN_1095&DEV_3114.DeviceDesc%,0x00010001, 0x31141095


[Win98ProblemDeviceList]
HKLM,%Win98ProblemDeviceSubKey%
HKLM,%Win98ProblemDeviceSubKey%, %ProblemDev1Name%, 0, %ProblemDev1Value%


; List of controller subsystem IDs to be supported by the SI3114.mpd driver on
; Windows 98/ME systems.
[Win98SupportedSubSystemIds]
HKLM, %Win98SupportedControllersSubKey%,%PCI\VEN_1095&DEV_3114.DeviceDesc%,0x00010001, 0x31141095



;*************************************************************
;The NT EventLog entries are the same for all SCSI miniports.
[Miniport_EventLog_Inst]
AddReg = Miniport_EventLog_AddReg

[Miniport_EventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll"
HKR,,TypesSupported,0x00010001,7


[IOS]
HKR,,DevLoader,,*IOS
HKR,,DontLoadIfConflict,,"Y"


[WIN98.REG]
HKR,,PortDriver,,SI3114.mpd


[Strings]
SI="Silicon Image"

PCI\VEN_1095&DEV_3114.DeviceDesc="Silicon Image SiI 3114 SATALink Controller"
SI3114.SvcDesc="SiI-3114 SATALink Controller"


Win98ProblemDeviceSubKey = "System\CurrentControlSet\Services\SI3114\ProblemDevices"
Win98SupportedControllersSubKey = "System\CurrentControlSet\Services\SI3114\SupportedSubsystemIDs"


ProblemDev1Name="Maxtor 4D060H3                          DAK05GK0"
ProblemDev1Value="MaxMode = UDMA-5"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.80