Installing the drivers on an existing Windows XP/2003 installation 1. Start your Windows system and log in. You must have System Administrator privileges to install the driver. 2. Windows setup will show a "New Hardware Found" dialog box. Click next. 3. Insert the LSI 1030 driver floppy disk included with packaging in drive A: 4. Choose "Install the driver automatically". Click next. 5. The Hardware Update Wizard searches for the appropriate driver and automatically updates the software. 6. Windows may prompt you to reboot. After rebooting you can use the drive attached to the Promise controller. Drivers can also be found on the Tyan Drivers CD. ============================================================================================================================ 1. Start the Windows XP/2003 installation by booting from the Windows CD-ROM: 2. Press the F6 key to install the LSI driver when the screen displays "Windows XP/2003 Setup". 3. Choose S to specify an additional device when the screen displays "Setup could not determine the type of one or more mass storage devices..." NOTE: If this screen is not displayed as the first user input, then pressing the F6 key was not seen by the setup program. Reboot the system and try again. The system prompts for the manufacturer-supplied hardware support disk. 4. Insert the appropriate driver diskette** and press Enter. 5. Press Enter to proceed. Return to the Windows Setup screen. Drivers can also be found on the Tyan Drivers CD.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.