\HELP\WIN95_98\WIN98.TXT
NETGEAR FA410TX Fast Ethernet PC Card
-------------------------------------
Driver Installation for Microsoft Windows 98
--------------------------------------------
Getting Started
---------------
Microsoft Windows 98 does not come bundled with the driver for the
NETGEAR FA410TX PC card. You must go through the following procedure
to install the device driver into the Windows 98 system for the adapter
to function correctly.
The Windows 98 installation disks or CD are needed to complete this
installation.
Installation Procedure
----------------------
Follow these steps to install the FA410TX Fast Ethernet PC Card's driver:
1. Insert the FA410TX Fast Ethernet PC card into an available PCMCIA
slot in your notebook computer, and power on your system. (You may
also insert the card after you start your notebook computer.)
2. After starting Windows 98, the FA410TX Fast Ethernet PC Card will
be detected automatically, then the Add New Hardware Wizard window
appears.
3. Insert the FA410TX Fast Ethernet PC Card Installation diskette
into the floppy disk drive.
4. Click the Next button in the Add New Hardware Wizard window.
Windows will display two selections. Choose the top selection,
Search for the best driver for your device (recommended).
5. Select Floppy disk drive and click the Next button in the Add New
Hardware Wizard window. Win98 will start searching into the floppy
drive for network driver. The following message will be displayed.
"NETGEAR FA410TX Fast Ethernet PC Card"
6. Click the Next button. Win98 will start copying the necessary driver
into your hard disk. Insert the Win98 CD-ROM if prompted to do so.
7. Click the Finish button.
8. Restart your computer.
Advanced Setup
--------------
The FA410TX driver configures the adapter card to operate in autosensing
mode by default. In this mode, the card automatically selects the most
appropriate operating speed and duplex mode. There might be instances
when you need to configure the adapter card to operate at a particular
speed and duplex mode. The following procedure guides you into the
Windows 98 system for this setting.
1. In Control Panel, open "Network".
2. Click on the "NETGEAR FA410TX" adapter selection and the "Properties"
button.
3. Click on the "Advanced" tab in the FA410TX adapter card window.
4. Click on the "Connection Type" property selection.
5. The "Value" windows will show the following possible selections:
Auto Sense (Automatically decide between the following
three modes)
10Base-T (Ethernet)
10Base-T Full Duplex (Full-duplex Ethernet)
100BaseTX (Fast Ethernet)
100BaseTX Full Duplex (Full-duplex Fast Ethernet)
Choose the appropriate setting as needed.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.