SpeedStream 2602 FIRMWARE v1.20 --------------------------------------------------------------------------------------- New firmware has been released for the SpeedStream 2602 product. This new firmware resolves the following known issues with the previous version: - Issues with failing dial-backup configuration have been corrected - Resolved issue with DNS entries not being saved properly - Corrected problem that required some users to enter http://192.168.254.254:88 instead of http://192.168.254.254 when accessing the router's web interface - Corrected problem with default values not being set properly - Other miscellanous fixes NOTE: Please backup your current configuration before performing any upgrade procedure! --------------------------------------------------------------------------------------- To upgrade your SpeedStream router, first follow this link to download the new firmware: http://www.speedstream.com/support/drivers/2602_firmware_v120.zip. This self-extracting archive contains three files - a bootcode upgrade, a runtime upgrade, and this readme file. Once you have extracted the files to a temporary folder, follow the procedure below to upgrade your firmware: UPGRADE PROCEDURE 1. Access the web interface of your SpeedStream 2602 router. 2. Select Tools from the menu, then select Update firmware. 3. Click the ENTER button. 4. Click the BROWSE button and navigate to the temporary folder where you extracted the firmware files. Locate the BOOTCODE image file and select open 5. Click the START button and follow the instructions on screen 6. When finished, repeat steps 2-5 but this time select the RUNTIME file. After performing the above upgrade procedure and rebooting your router, the firmware upgrade is complete. Verify that your configuration settings are still set properly and you are still able to connect to the Internet. If there are any problems with your configuration or Internet connection, either run the configuration wizard to reconfigure your router, or restore your previous configuration from backup!Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.