[Identification]
OptionType = NetTransport
[Options]
TCAITDI
[FileConstants]
UtilityInf = "UTILITY.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "service"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
Manufacturer = "3Com"
TCAITDIMajorVersion = "1"
TCAITDIMinorVersion = "0"
TCAITDIVersion = $(TCAITDIMajorVersion)"."$(TCAITDIMinorVersion)
TCAITDISoftwareName = "TCAITDI"
TCAITDISoftwareImagePath = "%SystemRoot%\System32\drivers\TCAITDI.sys"
NetRuleSoftwareType = "TCAITDI lmNetService ndisTransport"
NetRuleSoftwareClass = {"rasCapableTransport netBiosTransport"}
NetRuleSoftwareUse = $(SoftwareType)" yes yes"
NetRuleSoftwareBindForm = """TCAITDI"" yes yes simple"
TCAITDIKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(TCAITDISoftwareName)"\CurrentVersion"
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyTCAITDI = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
goto returnoptions
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set CalledFrom = $($6)
Debug-Output "TCAITDI.INF: $($6) is: "$(CalledFrom)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
Debug-Output "OEMNXPNB.INF: STF_CWDDIR is: "$(!STF_CWDDIR)
Debug-Output "OEMNXPNB.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNXPNB.INF: ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
else
set StartLabel = installadapter
endif
set RadioDefault = 2
set RadioIn = {$(RadioDefault)}
set from = $(fatal)
set to = $(fatal)
goto $(StartLabel)
installadapter = +
OpenRegKey $(!REG_H_LOCAL) "" $(TCAITDIKeyName) $(MAXIMUM_ALLOWED) KeyTCAITDI
Ifstr $(KeyTCAITDI) != $(KeyNull)
CloseRegKey $(KeyTCAITDI)
ifstr $(Option) == "TCAITDI"
goto end
endif
endif
goto installproduct
installproduct = +
StartWait
ifint $(OldVersionExisted) == $(FALSE)
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
set OEM_ABANDON_ON = TRUE
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(TCAITDISoftwareName), +
$(TCAITDISoftwareName), +
$(TCAITDISoftwareDisplayName), $(STF_CONTEXTINFNAME), +
$(TCAITDISoftwareImagePath), "kernel", "TDI", {}, "",+
$(NetEventDLL)
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
goto fatalRegistry
endif
Set SoftTCAITDIKey = $($R1)
Set SoftNetRuleKey = $($R2)
Set SoftServiceKey = $($R3)
set KeyParameters = $($R4)
Set SoftLinkageKey = $($R5)
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(TCAITDIMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(TCAITDIMinorVersion)},+
{"Locked",$(NoTitle),$(!REG_VT_SZ),"ON"},+
{"Uninstall",$(NoTitle),$(!REG_VT_SZ),"NO"},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(TCAITDISoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(TCAITDISoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(TCAITDISoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(SoftTCAITDIKey), $(NewValueList)
set RegistryErrorIndex = $($R0)
Ifstr $(RegistryErrorIndex) != NO_ERROR
CloseRegKey $(SoftTCAITDIKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftLinkageKey)
CloseRegKey $(KeyParameters)
goto fatalRegistry
endif
set NewValueList = {{type ,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)}, +
{use ,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),"TCAITDI"}}
Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
set RegistryErrorIndex = $($R0)
Ifstr $(RegistryErrorIndex) != NO_ERROR
CloseRegKey $(SoftTCAITDIKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftLinkageKey)
CloseRegKey $(KeyParameters)
goto fatalRegistry
endif
Set NewValueList = {{NbProvider,$(NoTitle),$(!REG_VT_SZ),"_nb"}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
Ifstr $(RegistryErrorIndex) != NO_ERROR
CloseRegKey $(SoftTCAITDIKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftLinkageKey)
goto fatalRegistry
endif
CloseRegKey $(SoftTCAITDIKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftLinkageKey)
endif
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE" $(!REG_KEY_WRITE) SOFTWAREKEY
OpenRegKey $(SOFTWAREKEY) "" "3Com" $(!REG_KEY_WRITE) COMKEY
ifstr $(COMKEY) == ""
CreateRegKey $(SOFTWAREKEY) {"3Com", 0, GenericClass} "" $(!REG_KEY_WRITE) "" COMKEY
endif
OpenRegKey $(COMKEY) "" "TCAUDIAG" $(!REG_KEY_WRITE) KeyAutoEcho
ifstr $(KeyAutoEcho) == ""
CreateRegKey $(COMKEY) {"TCAUDIAG", 0, GenericClass} "" $(!REG_KEY_WRITE) "" KeyAutoEcho
endif
Set NewValueList = {{AutoEcho,$(NoTitle),$(!REG_VT_SZ),"YES"}}
Shell $(UtilityInf), AddValueList, $(KeyAutoEcho), $(NewValueList)
Ifstr $(RegistryErrorIndex) != NO_ERROR
goto fatalRegistry
endif
CloseRegKey $(SOFTWAREKEY)
CloseRegKey $(COMKEY)
CloseRegKey $(KeyAutoEcho)
goto writeparameters
writeparameters = +
CloseRegKey $(KeyParameters)
EndWait
goto successful
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(TCAITDISoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
goto end
UpgradeSoftware = +
goto end
successful = +
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Set CommonStatus = STATUS_USERCANCEL
Set Severity = STATUS
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto removeadapter
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[UserAbort]
read-syms GeneralConstants
read-syms FileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
read-syms FileConstants$(!STF_LANGUAGE)
detect checkExist
set Untdi = *($(TdiuninstFound), 1)
ifstr(i) $(Untdi) == "untcatdi.exe"
RunProgram status "x" "" $(!STF_WINDOWSSYSPATH)\unTCATDI.exe -test
RunProgram status "x" "" $(!STF_WINDOWSSYSPATH)\unTCATDI.exe -inf
endif
OpenRegKey $(!REG_H_LOCAL) "" $(TCAITDIKeyName) $(MAXIMUM_ALLOWED) TCAITDIKey
GetRegValue $(TCAITDIKey) "Uninstall" TCAITDIList
set Uninst = *($(TCAITDIList),4)
Ifstr(i) $(Uninst) == "YES"
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(TCAITDISoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
CloseRegKey $(TCAITDIKey)
Set CommonStatus = STATUS_USERCANCEL
Return $(CommonStatus)
[checkExist]
TdiuninstFound = {} ? $(!LIBHANDLE) FindFileInstances $(!STF_WINDOWSSYSPATH)"\untcatdi.exe"
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
;AddSectionFilesToCopyList Files-TCAITDI $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
;AddSectionFilesToCopyList Files-SetUp $(SrcDir) $(!STF_WINDOWSSYSPATH)
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
ifstr(i) $(DoConfig) == "YES"
endif
Exit
[Source Media Descriptions]
1 = "3Com EtherCD for 3Com EtherLink PCI NICs", TAGFILE = boom90x.inf
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-TCAITDI]
[Files-SetUp]
[LanguagesSupported]
ENG
[OptionsTextENG]
NDISPERF = "3Com TCAITDI Diagnostic TDI"
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
FunctionTitle = "TCAITDI Driver"
;TCAITDISoftwareDescription = "3Com Diagnostic Communication Module"
TCAITDISoftwareDescription = "This module controls communication between the diagnostic and the 3Com NIC driver."
TCAITDISoftwareDisplayName = "3Com Diagnostic Communication Module"
TCAITDISoftwareTitle = $(TCAITDISoftwareDisplayName)
TCAITDIServiceDisplayName = $(TCAITDISoftwareDisplayName)
ShellCodeErrorTitle = "Error: "$(FunctionTitle)
ShellCodeErrorText = "Shell Code Error."
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG]
GroupLabel = "Optimization:"
Radio1 = "&Minimize Memory Used"
Radio2 = "&Balance"
Radio3 = "M&aximize Throughput && Connections"
DlgType = "Radio"
DlgTemplate = "NBF"
Caption = $(FunctionTitle)
OptionsGreyed = {}
HelpContext = $(!IDH_DB_OEMNXPNB_INS)
;(%VER TCAITDI.INF - Disk Directory v5.1.0.2)
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.