Linux Installation Guide v1.2 030925 Obtaining Drivers The driver package is located on this disk in the directory Driver/Linux/ltmodem-8.26a9/ or from http://www.heby.de/ltmodem, and are packaged as both source and pre-compiled binaries for most major Linux distributions. This document only covers the installation of the source package ltmodem-8.26a9.tar.gz. Requirements Although it should not be necessary to re-compile the kernel in order to get the drivers to function properly, you will need to have a full and configured installation of the Linux kernel source. Some distributions will only install the kernel header files by default. For these situations you will need to download a copy of the kernel source from http://kernel.org, and compile and install it on your system before installation of the ltmodem drivers package. Depending on the version of the kernel installed on your system, other software requirements are as follows: Recommended Versions Linux Kernel - 2.4.x GNU C - 3.2.x GNU make - 3.79 Binutils - 2.13.x Installation Instructions 1.Download the ltmodem-8.26a9.tar.gz package from http://www.heby.de/ltmodem 2.Extract the files using tar zxvf ltmodem-8.26a9.tar.gz 3.Change to the directory just created cd ltmodem-8.26a9 4.Build the kernel modules ./build_module 5.Install the modules using ./ltinst2 6.Setup the modules to load automatically using ./autoload 7.Verify that the configuration is correct using ./checkout The drivers for the modem should now be installed and loaded properly. Connections can be setup using Kppp or by configuring pppd manually. Refer to your distribution's documentation for instructions on how to setup a dial-up Internet connection.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.