ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ Installation for Windows 95 ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
Function:
1. W940ND.VXD is a NDIS 3.x driver for Windows 95.
If there exists only one RP-1651W card, the driver will automatically
get IOBASE and IRQ from PCI Configuration Space.
If there exists more than one RP-1651W cards, user can indicate a
specified RP-1651W card by inputing IDs.
2. W940ND.INF is a Network Setup Information File for Windows 95 Platform.
Installation:
1. Load W904ND.VXD and W940ND.INF files into local hard disk.
2. Click the 'Network' Icon in the Control Panel Group.
3. Click the 'Add' Buttom in the 'Network' Dialog Box.
4. Select the 'Adapter' item and click the 'Add' Button in the 'Select
Network Component' Dialog Box.
5. Click the 'Have Disk' Button in the 'Select Network adapters' Dialog
Box.
6. Type the path name that contains W940ND.VXD and W940ND.INF files and
click the 'OK' Button.
7. Press <enter> when the 'RP-1651W PCI Ethernet Adapter' Dialog
appears.
8. If more than one RP-1651W cards are install on your computer, select
a specified RP-1651W card by inputing Ethernet ID.
Select the 'RP-1651W PCI Ethernet Adapter' item in the 'Network'
Dialog Box.
Click the 'Advanced' Button.
Select the 'Selected Etherent ID' item.
Type the Ethernet ID.
Click the 'OK' Button.
9. Click the 'OK' Button when you finish all installation processes.
10.Restart your computer.
Usage:
1. Boot your computer.
2. If want to change the setting of early interrupt function of this
driver, please refer step 2 to step 11 in the Installation section.
3. If more than one RP-1651W cards are installed on your system, select
a specified RP-1651W card to load. (refer to step 2 to step
11 in the Installation section)
Trouble Shooting:
1. Message: 'Your network adapter RP-1651W PCI Ethernet Adapter[0000] is
not working properly. You may need to set it up again.
For more information, see the Network Troubleshooter in
Windows Help.'
Solution: Make sure that your RP-1651W card is plugged into your
system.
2. Condition: The Windows 95 can not boot normally.
Solution: Make sure that your RP-1651W PCI card is connected to the
cable.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.