1. 100pac.zip Driver
2. NW4XX.TXT File Contents

NW4XX.TXT Driver File Contents (100pac.zip)

                   TE-PCI/TE-100PCI Ethernet Adapter Installation
                   for the NetWare Server 4.x Driver

 Contents
 ÄÄÄÄÄÄÄÄ
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started


 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
    This installation assumes that the adapter is working properly.
    Getting Started will describe the installation instructions.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
     A PCI compatible computer
     An ODI compatible network operating system
     A PCI Family Series Adapter
     A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     A knowledge of basic DOS commands
     A knowledge of editing text files
     A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used

 Compatibility List
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     Any PCI Family Ethernet Adapter
     Because this version of driver follows Novell ODI Driver Specification
      Version 3.3, the v4.10 server must be patched to work well with this
      driver. The v4.11 green river server does not need to be patched.
      The patch method is described as below:

        1. Copy LOADER.EXE and LSWAP.EXE to the NetWare 4.10 server directory,
           must be \NWSERVER (if not, rename the directory name).

        2. Execute LSWAP.EXE at \NWSERVER.

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

    Using the install menu for NetWare 4.1 only (for other version see below)
    ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

     Boot up the Novell Server.

     After booting up, execute "LOAD INSTALL".  Type:

        : load install

     Select "Driver Option" and then press Enter.

     Select "Configure network drivers" and then press Enter.

     Select "Select a driver" and then press Enter.

     Press the Ins key to install an unlisted driver.

     Press F3 to specify a different PATH (C:\SRV4X) and then press Enter.
      <PATH> is the directory where TEPCI.LAN resides.

     Select "TEPCI.LAN" and then copy the TEPCI.lan file.

     Set the adapter parameters, then select "Save parameters and load driver".

    Modifying an existing NetWare 4.x Server
    ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     From any workstation, log in to the Novell server as a SUPERVISOR.

     Copy all provided NLM and LAN files into your server's SYSTEM directory.
      Type:

        >copy <PATH>\*.*   F:\SYSTEM
        >copy NBI.NLM      F:\SYSTEM        (OS default path)

        <PATH> here is the directory where support NLMs and TEPCI.LAN
               reside.

     From the Novell Server side, execute "load install".  Type:

         :load install
           Select <NCF files options>
           Select <Edit AUTOEXEC.NCF>

     Modify the server's AUTOEXEC.NCF file as follows.

          :load TEPCI.LAN
           (msm.nlm, ethertsm.nlm and nbi.nlm will also be loaded when loading
            TEPCI.LAN)
          : bind ipx to TEPCI NET=xxxx

     Shut down the server and then turn it ON again.

     The driver is now installed and running.