TRENDware TE-PCI/TE-100PCI Ethernet Adapter Installation Netware Client 32 for DOS/Windows 3.1x/Windows 95 Contents ÄÄÄÄÄÄÄÄ Introduction Requirements Minimum Skill Level Getting Started Introduction ÄÄÄÄÄÄÄÄÄÄÄÄ Window 95 offers the easiest installs for any OS/NOS in the industry. Since it has drivers that are compatible with your PCI Family, using our drivers is not necessary. There isn't a performance difference between the built in drivers and our drivers. Each of our PCI Family reacts differently with Windows 95. Requirements ÄÄÄÄÄÄÄÄÄÄÄÄ A PCI compatible computer Microsoft's Windows 95 Novell Netware Client 32 for Windows 95 (OR) Novell Netware Client 32 for DOS (OR) Novell Netware Client 32 for Windows 3.1x A PCI Family Series Adapter A knowledge of basic Win 95 commands and editing text files Minimum Skill Level ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ A knowledge of basic Win 95 commands A knowledge of editing text files A knowledge of Win 95 basic file structure A knowledge of the network driver configuration being used Getting Started ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Client 32 for Windows 95 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ NOTE: Please install Novell Netware Client 32 for Windows 95 first. Method 1: First Time Installation ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ This method is used for first time installing driver on Windows 95. Make sure there is no Network Interface Card plugged on your machine. Start Windows 95 and get into "Control Panel". Double click "Network" icon then on "Configuration" screen. Remove all items in list box then click "Add" button. On "Select Network Component Type" screen click "Adapter" which locates at list box and then click "Add" button On "Select Network Adapters" screen click "Have Disk" button. On "Install From Disk" screen, input the path where the driver locates example: A:\CLIENT32.95, if floppy disk is used. C:\CLIENT32.95, if hard disk is used. OR You can click "Browse" button to search for the path where the driver locates. Another "Select Network Adapters" will be popped up and the following list is displayed: Models: TE-PCI PCI Ethernet Adapter TE-PCI+/TE-PCI+D PCI Ethernet Adapter TE-100PCI PCI Fast Ethernet Adapter Click the card type which you want to installed and click the "OK" button. Follow screen instructions until installation is finished. Don't restart your Windows 95 system right now. Get into "Control Panel" again. Double click "Network" icon then at "Configuration" screen remove all items in list box and click "OK" button. Power off and insert TE-PCI/TE-100PCI series adapter into machine. Start Windows 95 and TE-PCI/TE-100PCI adapter will be found. In "Copying files ..." screen input the path where the driver locates ex. A:\CLIENT32.95, if floppy disk is used. C:\CLIENT32.95, if hard disk is used. Follow screen instructions until installation is finished. Reboot your system. Method 2: The Other Times Install Driver ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ This method is used for installing driver on Windows 95 which has been installed this PCI Ethernet driver of Novell Netware Client 32 for Windows 95. Power off and insert your adapter into machine. Start Windows 95 and the adapter will be found. In "Copying files ..." screen input the path where the driver locates ex. A:\CLIENT32.95, if floppy disk is used. C:\CLIENT32.95, if hard disk is used. Follow screen instructions until installation is finished. Reboot your system. TroubleShooting ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ If you experience the warning messages displayed when system reboot "Command Line Parameter Prompt for TEPCI" then follow the instructions as below: Start Windows 95 and get into "Control Panel". Double click "Network" icon then on "Configuration" screen click the driver instlled before which is listed in the list box then click the "Properities" button. On "Properities" screen click "Adavanced" menu item. On "Adavanced" screen click "slot" in the list box and set value=1 (if the first driver instance, value=2 if the second one and so on). Reboot your system. Client 32 for DOS/Windows 3.1x ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Method 1: Install Driver During Install Novell Netware Client 32 for DOS/Windows 3.1x ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Follow the installation setps of Novell Netware Client 32 for DOS/Windows 3.1x. When 'Insert the NETWARE CLIENT 32 FOR DOS/WINDOWS 3.1x DISK 5 - LAN DRIVER' diskette ...etc. is prompted insert the desired diskette and on "Insert The Driver Disk" screen input the path where the driver locates: ex. A:\CLIENT32, if floppy disk is used. C:\CLIENT32, if hard disk is used. Select the desired parameters and continue the installation procedure. After the installation is finished the following files will be created: "\NOVELL\DOSCLNT" is Client32 for DOS/Windows 3.1x installation path. Content of STARTNET.BAT (for 32-bit LAN driver) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ SET NWLANGUAGE=ENGLISH C:\NOVELL\DOSCLNT\NIOS.EXE LOAD C:\NOVELL\DOSCLNT\LSLC32.NLM LOAD C:\NOVELL\DOSCLNT\CMSM.NLM LOAD C:\NOVELL\DOSCLNT\ETHERTSM.NLM LOAD C:\NOVELL\DOSCLNT\TEPCI.LAN SLOT=1 FRAME=ETHERNET_802.2 LOAD C:\NOVELL\DOSCLNT\TEPCI.LAN SLOT=1 FRAME=ETHERNET_802.3 LOAD C:\NOVELL\DOSCLNT\TEPCI.LAN SLOT=1 FRAME=ETHERNET_II LOAD C:\NOVELL\DOSCLNT\TEPCI.LAN SLOT=1 FRAME=ETHERNET_SNAP LOAD C:\NOVELL\DOSCLNT\IPX.NLM <-- Binding driver LOAD C:\NOVELL\DOSCLNT\CLIENT32.NLM <-- Finding server Content of STARTNET.BAT (for 16-bit LAN driver) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ SET NWLANGUAGE=ENGLISH C:\NOVELL\DOSCLNT\NIOS.EXE C:\NOVELL\DOSCLNT\LSL.COM C:\NOVELL\DOSCLNT\N16ODI.COM C:\NOVELL\DOSCLNT\NESL.COM C:\NOVELL\DOSCLNT\TEPCI.COM LOAD C:\NOVELL\DOSCLNT\LSLC32.NLM LOAD C:\NOVELL\DOSCLNT\PC32MLID.LAN LOAD C:\NOVELL\DOSCLNT\TCPIP.NLM LOAD C:\NOVELL\DOSCLNT\IPX.NLM <-- Binding driver LOAD C:\NOVELL\DOSCLNT\CLIENT32.NLM <-- Finding server Content of NET.CFG ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Link Driver TEPCI Frame Ethernet_802.2 Frame Ethernet_802.3 Frame Ethernet_II Frame Ethernet_SNAP NetWare DOS Requester FIRST NETWORK DRIVE = I NETWARE PROTOCOL = NDS BIND NOTE: You can run the Netware client installation program for each workstation type from the CLIENT directory under SYS:PUBLIC or directly from the CD-ROM. Method 2: Install Driver After Novell Netware Client 32 for DOS/Windows 3.1x is Installed ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Use text editor to edit STARTNET.BAT directly.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.