1. 100pac.zip Driver
2. BANYAN.TXT File Contents

BANYAN.TXT Driver File Contents (100pac.zip)

           TRENDware TE-PCI/TE-100PCI Ethernet Adapter Installation
                   for Banyan Vines

 Contents
 ÄÄÄÄÄÄÄÄ
     Introduction
     Requirements
     Minimum Skill Level
     Getting Started

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
    This installation assumes that the adapter is working properly.
    Getting Started will describe the installation instructions.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
     A PCI compatible computer
     Banyan VINES v4.00(2)
     A PCI Family Series Adapter
     A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     A knowledge of basic DOS commands
     A knowledge of editing text files
     A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
    There are two methods of copying files from the Banyan VINES
    workstation to the bootable diskette or subdirectory on the hard
    disk.

    Method 1
    ÄÄÄÄÄÄÄÄ
     Execute the 'INSTALL' command included in the diskette labeled
      "VINES MASTER DISK".

     Follow the given instructions for copying files.

    Method 2
    ÄÄÄÄÄÄÄÄ
     Execute the 'BAN' command.

     Login to VINES system.

     Execute the 'PCCOPY' command.

     Select the 'NDIS Ethernet' option and follow the instructions for
      copying files.

     Prepared bootable diskette in Drive B. Then, copy the appropriate NDIS
      driver file TEPCI.DOS to Drive B.

     Create a CONFIG.SYS file with the following statements:

        DEVICE=PROTMAN.DOS /I:A:\
        DEVICE=TEPCI.DOS

      NOTE:  A:\ is the path where Banyan VINES workstation files reside.

     Create a TEPCI.NIF file containing the following statements:

        Model = TRENDware TE-PCI/TE-100PCI Ethernet Card
        Path = A:\
        DeviceDriver = TEPCI.DOS
        DeviceName = TEPCI$
        Type = NDIS

      NOTE:  A:\ is the path where Banyan VINES workstation files reside.

     Create a PROTOCOL.INI file with the following lines:

        [PROTOCOL MANAGER]
        drivername = PROTMAN$

        [VINES_XIF]
        drivername = NDISBAN$
        bindings = "TEPCI"

        [TEPCI]
        drivername = TEPCI$

     Execute the 'PCCONFIG' command.

      A "CONFIGURING A PC FOR THE NETWORK" message appears on the
      screen. The program then provides some options you can select.

     Select "1 - Network Card Settings".

      Another screen appears for selecting some options.

     Select "NDIS Ethernet".

     Select the appropriate configuration of the adapter.

     After configuring the adapter, you return to the main screen.

      Select "2 - Login Environment Settings".

     From the next screen, select "NDIS Ethernet".

      The 'PCCONFIG.DB' file will then be created.

     Reboot your computer.

     Login to VINES by executing the 'BAN' command.