;******************************************************************** ;* ;* File: oxser.inf ;* ;* Description: ;* Installs serial port driver ;* for OX16C95x UARTs only (Win9x/Win2000) ;* ;******************************************************************** [version] signature="$CHICAGO$" Class=Ports ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} Provider=%mfg% ;CatalogFile=Oxser.cat ; .cat for Win 95/98/Me binaries ;CatalogFile.NT=OxserNT.cat ; Different .cat for Win2k binaries ; Win98 doesn't recognise DriverVer in [version] section, so this tag is copied ; in its DDInstall sections DriverVer=07/11/2003, 4.0.8 [DestinationDirs] DefaultDestDir = 11 ;LDID_SYS Drv.Copy = 11 Drv.NT.Copy = 12 ;DIRID_DRIVERS dll.NT.Copy = 11 ;LDID_SYS ;serenum.NT.Copy = 12 ;DIRID_DRIVERS ; Install class "Ports" ;---------------------------------------------------------- [ClassInstall] AddReg=PortsClass.AddReg [PortsClass.AddReg] HKR,,,,%PortsClassName% [ClassInstall32.NT] AddReg=PortsClass.NT.AddReg [PortsClass.NT.AddReg] HKR,,,,%PortsClassName% HKR,,Icon,,"-23" HKR,,Installer32,,"MsPorts.Dll,PortsClassInstaller" [ControlFlags] ExcludeFromSelect=*PNP0501 ; Drivers ;---------------------------------------------------------- [Manufacturer] %mfg%=mfg [mfg] %ComPort.DeviceDesc% = ComPort, *PNP0501, *PNP0500 %Card0.DeviceDesc% = ComPortCF, PCMCIA\CF_CARD-GENERIC-A569 [ComPort] DriverVer=07/11/2003, 4.0.8 CopyFiles=Drv.Copy AddReg=ComPort.AddReg, ComPort.W95.AddReg LogConfig=c14,c1a,c23,c2a,c34,c3a,c43,c4a,caa [ComPort.NT] CopyFiles=Drv.NT.Copy, dll.NT.Copy AddReg=ComPort.AddReg, ComPort.NT.AddReg LogConfig=c14,c1a,c23,c2a,c34,c3a,c43,c4a,caa [ComPort.NT.HW] AddReg=ComPort.NT.HW.AddReg ; Add sections for CF950, compact flash mode [ComPortCF] DriverVer=07/11/2003, 4.0.8 CopyFiles=Drv.Copy AddReg=ComPort.AddReg, ComPortCF.W95.AddReg [ComPortCF.NT] CopyFiles=Drv.NT.Copy, dll.NT.Copy AddReg=ComPort.AddReg, ComPort.NT.AddReg [ComPortCF.NT.LogConfigOverride] LogConfig = cfconfig [ComPortCF.NT.HW] AddReg=ComPort.NT.HW.AddReg ;---------------------------------------------- [ComPort.NT.HW.AddReg] HKR,,"UpperFilters",0x00010000, "serenum" ;;MULTI_SZ HKR,,"95xSpecific", 0x00000001,01,00,00,00,00,00,c9,16,20,00,01,00,04,64,10,70,08,00,00,00,00,00,00,10 HKR,,"ClockRate", 0x00010001, 1843200 ;HKR,,"DisablePowerManagement", 0x00010001, 0 [ComPort.AddReg] HKR,,PortSubClass,1,01 [ComPort.W95.AddReg] HKR,,DevLoader,0,*vcomm HKR,,Enumerator,0,serenum.vxd HKR,,PortDriver,0,oxser.vxd ;HKR,,Contention,0,*vcd HKR,,ConfigDialog,0,oxserui.dll HKR,,DCB,3,1c,00,00,00,80,25,00,00,11,33,00,00,00,00,0a,00,0a,00,08,00,00,11,13,00,00,00,00,00 HKR,,950Specific,3,00,01,08,10,04,70,40,78,12,14,00,00,00,01,00,00 HKR,,EnumPropPages,0,oxserui.dll,EnumPropPages HKR,,OxDriverVersion,,%OXDriverVersion% [ComPortCF.W95.AddReg] HKR,,DevLoader,0,*vcomm HKR,,Enumerator,0,serenum.vxd HKR,,PortDriver,0,oxser.vxd ;HKR,,Contention,0,*vcd HKR,,ConfigDialog,0,oxserui.dll HKR,,DCB,3,1c,00,00,00,80,25,00,00,11,33,00,00,00,00,0a,00,0a,00,08,00,00,11,13,00,00,00,00,00 HKR,,950Specific,3,00,01,08,10,04,70,40,78,12,14,00,00,00,01,00,00 HKR,,EnumPropPages,0,oxserui.dll,EnumPropPages HKR,,OxDriverVersion,,%OXDriverVersion% [ComPort.NT.AddReg] HKR,,EnumPropPages32,,"oxui.dll,SerialPropPageProvider" [Drv.Copy] oxser.vxd oxserui.dll [Drv.NT.Copy] oxser.sys [dll.NT.Copy] oxui.dll ;-------------- Service installation ; Port Driver (function driver for this device) [ComPort.NT.Services] AddService = oxser, 0x00000002, oxser_Service_Inst, oxser_EventLog_Inst AddService = Serenum,,Serenum_Service_Inst [ComPortCF.NT.Services] AddService = oxser, 0x00000002, oxser_Service_Inst, oxser_EventLog_Inst AddService = Serenum,,Serenum_Service_Inst ; -------------- Serial Port Driver install sections [oxser_Service_Inst] DisplayName = %oxser.SVCDESC% ServiceType = 1 ; SERVICE_KERNEL_DRIVER StartType = 1 ; SERVICE_SYSTEM_START (this driver may do detection) ErrorControl = 0 ; SERVICE_ERROR_IGNORE ServiceBinary = %12%\oxser.sys LoadOrderGroup = Extended base ; -------------- Serenum Driver install section [Serenum_Service_Inst] DisplayName = %Serenum.SVCDESC% ServiceType = 1 ; SERVICE_KERNEL_DRIVER StartType = 3 ; SERVICE_DEMAND_START ErrorControl = 1 ; SERVICE_ERROR_NORMAL ServiceBinary = %12%\serenum.sys LoadOrderGroup = PNP Filter [oxser_EventLog_Inst] AddReg = oxser_EventLog_AddReg [oxser_EventLog_AddReg] HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\oxser.sys" HKR,,TypesSupported,0x00010001,7 [ComPort.PosDup] *PNP0500, *PNP0501 ; -------------- LogConfig data [c14] ; COM1,IRQ4 ConfigPriority=HARDRECONFIG IOConfig=3f8-3ff(3ff::) IRQConfig=S:4 [c1a] ; COM1, any IRQ ConfigPriority=HARDRECONFIG IOConfig=3f8-3ff(3ff::) IRQConfig=S:3,4,5,7,9,10,11,12,14,15 [c23] ; COM2, IRQ3 ConfigPriority=HARDRECONFIG IOConfig=2f8-2ff(3ff::) IRQConfig=S:3 [c2a] ; COM2, any IRQ ConfigPriority=HARDRECONFIG IOConfig=2f8-2ff(3ff::) IRQConfig=S:3,4,5,7,9,10,11,12,14,15 [c34] ; COM3, IRQ4 ConfigPriority=HARDRECONFIG IOConfig=3e8-3ef(3ff::) IRQConfig=S:4 [c3a] ; COM3, any IRQ ConfigPriority=HARDRECONFIG IOConfig=3e8-3ef(3ff::) IRQConfig=S:3,4,5,7,9,10,11,12,14,15 [c43] ; COM4, IRQ3 ConfigPriority=HARDRECONFIG IOConfig=2e8-2ef(3ff::) IRQConfig=S:3,5 [c4a] ; COM4, any IRQ ConfigPriority=HARDRECONFIG IOConfig=2e8-2ef(3ff::) IRQConfig=S:3,4,5,7,9,10,11,12,14,15 [caa] ; Any base, any IRQ ConfigPriority=HARDRECONFIG IOConfig=8@100-ffff%fff8(3ff::) IRQConfig=S:3,4,5,7,9,10,11,12,14,15 [cfconfig] ; This is for CF950 comnpact flash mode in Win2000 only ;IOConfig=DFF0-DFFF ; Use this line to fix the base address IOConfig=10@100-ffff%fff0(3ff::) IRQConfig=S:3,4,5,7,9,10,11,12,14,15 PcCardConfig=4 [SourceDisksNames] 1=%drvDisk%,, [SourceDisksFiles] oxser.vxd=1 oxserui.dll=1 oxser.sys=1 oxui.dll=1 [Strings] mfg = "(Enhanced ports)" PortsClassName = "Ports (COM & LPT)" drvDisk = "High-performance ports driver disk" OXDriverVersion = "4.0.8" ComPort.DeviceDesc = "OX16C95xx Communications port" Card0.DeviceDesc = "Compact Flash OX16CF950" oxser.SVCDESC = "OX16C95x Serial port driver" Serenum.SVCDESC = "Serenum Filter Driver" ParametersSubKey = "SYSTEM\CurrentControlSet\Services\oxser\Parameters"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.