\HELP\SCO\SCOOPEN.TXT NETGEAR FA310TX Fast Ethernet PCI Adapter ----------------------------------------- LLI Driver Installation for SCO OpenServer version 5.0 ------------------------------------------------------ Getting Started --------------- The necessary files for driver installation for SCO OpenServer are stored in a compressed format which can be decompressed in the OpenServer system. Installation Procedure ---------------------- 1. Login SCO OpenServer as root user. (On maintenance mode) 2. Copy the compressed file ngrXXX.Z (XXX is the version number, eg. ngr224.Z) from the \SCO directory of the driver diskette into your hard disk. 3. Use the doscp command to copy the SCO OpenServer Driver into the UNIX system. example: # cd /temp # doscp /<path>/ngr224.Z ngr224.Z 4. Uncompress ngrXXX.Z to ngrXXX, example: # uncompress ngr224 5. Copy the file to a blank 3.5" floppy diskette. example: #dd if=ngr224 of=/dev/fd0135ds18 Mark the diskette: NETGEAR FA310TX Fast Ethernet PCI Adapter LLI driver Rel.02.24 6. Use "custom" to install the driver Execute "custom" /* A menu selection screen will pop up. */ Using the [->] key to move the cursor to the "Software" menu item. Press the [] key to get into the pull down menu, then move to "Install New..." and press [ENTER]. ÉÍÍÍÍÍÍÍÍÍÍ Begin Installation on scoopen ÍÍÍÍÍÍÍÍÍÍ» º º º What host (machine) do you want to install from? º º º º ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º º ³<*> From scoopen ³ º º ³< > From another host ³ º º ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º º º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ Continue ] [ Cancel ] [ Help] º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Select From scoopen and use the [TAB] key to move the cursor to [Continue]. Press [ENTER] and then press [] to get into the pull-down menu. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Select Media ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Insert media, and select media device. º º º º ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º º Media Device:³|Floppy Disk Driver 0_____________________|v³ º º ÀÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º º ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º º º º³*Floppy Disk Driver 0 ³º º º º³ Media Images ³º º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ Continue ] ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ [ Help ]º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Select "Floppy Disk Driver 0" and use the [TAB] key to move the cursor to [ Continue ]. Press the [ENTER] key twice. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Enter Image Directory ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Installing: NETGEAR FA310TX PCI Adapter LLI Driver (ver 2.24) º º º º Do you want a FULL or PARTIAL installation? º º º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ Full ] [ Partial ] [ Cancel ] [ Help ] º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Use the [TAB] key to move the cursor to [ Full ]. Press [ENTER]. After the installation process, the following message is displayed: Installing the ngrpci driver no such device no such device no such device press [ENTER] to continue Press [ENETR], the following message will show. ÉÍÍÍÍÍÍÍÍÍÍÍÍ Message ÍÍÍÍÍÍÍÍÍÍÍ» º Installation Complete º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º [ OK ] º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Press [ENTER]. Use the [<-] key to move the cursor back to the "Host" menu item. Press [] to get to the pull-down menu. Move to "Exit" and press [ENTER]. At this time the driver is installed in the system successfully. 7. Use "netconfig" to configure the driver. /* A menu selection screen will pop up. */ At the "Hardware" menu item press the [] key to get into the pull- down menu. Move to "Add new LAN adapter" and press [ENTER]. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Add new LAN adapter ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» ºSelect network adapter to be added: º ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º º³* 3Com EtherLink 16/16TP Adapter ^º º³ . *º º³ . *º º³ . *º º³ . *º º³ *º º³ NETGEAR FA310TX PCI Ethernet Adapter, board 0 *º º³ . ³º º³ . ³º º³ . ³º º³ . vº ºÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙº ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ Continue ] [ Cancel ] [ Help ]º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Use the [] key to move to "NETGEAR FA310TX PCI Ethernet Adapter, board 0" and press [ENTER]. Note: If you are installing the first board, select the "board 0". If you are installing the second board, select the "board 1". If you are installing the third board, select the "board 2". If you are installing the fourth board, select the "board 3". ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Add Protocol ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» ºSelect one networking product to be added to º ºNETGEAR FA310TX Fast Ethernet PCI Adapter: º ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º º³ HW NETGEAR FA310TX PCI Ethernet Adapter ³º º³* - SCO IPX/SPX ³º º³ - SCO TCP/IP ³º º³ ³º º³ ³º ºÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙº ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ Add ] [ Cancel ] [ Help ]º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Use the [] key to move the cursor to "SCO TCP/IP" and press [ENTER]. The following message appears: Please choose the line speed that you want............ 0. Use default value. 1. 10 MB/sec mode. 2. 100 MB/sec mode. 3. Automatic detection between 10 MB/sec and 100 MB/sec mode. Enter the Line speed selection number (0 1 2 3)[0] or 'q' to quit: 0 Note: The default value of line speed is Automatic detection mode. The "line speed" and "media mode" option must be used together. When setting the line speed to Automatic detection mode, the "media mode" must be set to "Use default valuel". The following message appears: Please choose the media mode that you want............... 0. Use default value. 1. Point to point full duplex twisted pair connection. 2. Twisted pair connection. Enter media mode selection number (0 1 2)[0] or 'q' to quit: 0 Note: The default value of line speed is Automatic detection mode. The "line speed" and "media mode" option must be used together. When setting the line speed to Automatic detection mode, the "media mode" must be set to "Use default valuel". ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ SCO TCP/IP Configuration ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º º º º º º º Local Host Name: |scoopen_____________| [ Advanced ]º º IP Address: |192.9.200.1_________| Options... º º Netmask: |255.255.255.0_______| º ºBroadcast Address: |192.9.200.255_______| º º Domain Name: |scoopen.com_________| º º TCP connections: |256_________________| º º Pseudo ttys: |32__________________| º º º º º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º º º [ OK ] [ Cancel ] [ Help ]º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Input the required information and use the [TAB] key to move the cursor to "OK". Press [ENTER]. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Message ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º º º The following products were successfully configured into the system º º SCO TCP/IP º º NETGEAR FA310TX PCI Ethernet Adapter, board 0 º º º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ º º[ OK ] [ Help ] º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Press [ENTER]. At the "Hardware" menu item press [] to get into the pull-down menu. Move to the cursor to "Exit" and press [ENTER]. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Question ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º The Unix Kernel must be re-linked before the changesº º??? made here will have an effect. º º Do you want to re-link the kernel now? º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º [ YES ] [ NO ] º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Press [ENTER]. Do you want this kernel to boot by default (y/n) y Do you want the kernel environment rebuilt (y/n) y 8. Reboot unix # init 0 Note: Please check and make sure that the IRQ number matches the value set in ROM-BIOS before you specify this value. The IRQ for PCI devices can be accessed by rebooting the system, pressing [DEL] when the system is powering on and choosing the proper select item to set the IRQ for PCI devices. Example: ROM PCI/ISA BIOS (2A4X5C31) PCI/GREEN FUNCTION SETUP AWARD SOFTWARE, INC. Press the [DEL] key --> PCI/GREEN FUNCTION SETUP Slot 3 Using INT# : A-PIRQ1 . . . PIRQ1# Connect IRQ: 5 By Single ~Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.