1. EN2216.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (EN2216.zip)

                      Accton Technology Corporation   
                   EN2216/2316  PCMCIA Ethernet Adapters
                     Packet Driver Installation

The driver PCMPD.COM is used with Accton EN2216/2316 Ethernet PCMCIA adapters.

To load the packet driver, type:

    PCMPD 0X60.

PCMPD syntax:

PCMPD [-d] [-n] [-w] [-h] <PD_INT_NO> [IRQ] [IO_BASE]

where:

[-d]           The "-d" option does not start LAN card until this driver is
               called by the higher layer programs first.

[-n]           Your  NOVELL server uses NOVELL ISO-like packets. Your NOVELL
               workstation uses  NOVELL 8137 packets. You can use this option
               to convert NOVELL 8137 packets into  NOVELL ISO-like packets.

[-w]           Steve Wallace added a hack to let the packet drivers run under
               Windows. This is not to be construed with the proper solution,
               which is to write a TCP/IP package for Windows.

               This hack is enabled only when you use the '-w' switch.

[-h]           This option displays the on-line help.

<PD_INT_NO>    This specifies the software interrupt (IRQ) where  you'll
               load the packet driver. It must be in the range 0x60 to 0x80.

               The PC/TCP kernel, by default, is loaded at interrupt 0x61 (so
               don't load the packet driver there!)

[IRQ]          This specifies the hardware interrupt (IRQ)  where your card
               will be indicated whether the ring buffer is empty or not.

[IO_BASE]      This specifies the I/O address .


Example:

The following command line loads the Packet Driver at software interrupt 60h, 
I/O address 300, and hardware interrupt 5 (NE2000 MODE).

PCMPD 0x60 5 0x300

Note: The default I/O address is 300.
Note: The default hardware interrupt is 5.
Note: The placement of 0x prior to the parameters means this is a hexadecimal value.