LANMAN.TXT Driver File Contents (en2242.zip)

*******************************************************************
*                  ACCTON TECHNOLOGY CORPORATION                  *
*       EN1207F/EN2242/EN3207 SERIES FAST ETHERNET ADAPTER        *
*           NDIS 2 Driver For LAN Manager Installation            *
*                                                                 *
*         Copyright (C) 2002 Accton Technology Corporation        *
*                      All rights reserved.                       *
*******************************************************************

The EN5251 drivers in the MSLANMAN.DOS and MSLANMAN.OS2 diectories conform
to the Network Driver Interface Specification (NDIS) 2.0 as defined by
Microsoft/3Com.


NDIS 2 Driver Installation on LAN Manager v2.0
==============================================

  1. Type "Setup" in the LAN Manager directory and press Enter.

  2. Choose "Import Network Drivers..." in the "Action" field.
     Press <Enter> to continue.

  3. Insert your Driver Diskette or CD-ROM.
     Then press <Enter> to see the list of Imported Network
     Drivers on the screen.

  4. Press the <Space> Bar to select the appropriate Network Adapter
     (i.e. "Accton EN5251 Series Chip Based Fast Ethernet Adapter"), then press
     <Enter> to confirm your choice.

  5. Follow screen instructions to complete the process, until the Network
     Driver appears on screen.

  6. Identify your Network Adapter if asked. For example, select
     "Accton EN5251 Series Chip Based Fast Ethernet Adapter" to confirm any
     EN5251 Adapter.

  7. Select the <Add driver> and the <Add protocol> options. Then select
     <OK> to confirm your choices. The Workstation's primary parameters
     should appear on screen.

  8. Respond to all prompts issued on screen to complete the process.
     Select <OK> to confirm a choice.

  9. Save all selections. Choose "Save" from the "Action Menu".

 10. Press <F3> to exit.



NDIS 2 Driver Installation on LAN Manager v2.1
==============================================

  1. Type "lmsetup" in the LAN Manager directory and press <Enter>. The
     Microsoft LAN Manager Setup screen should appear.

  2. Choose "Network Drivers..." in the "Configuration" field. Press <Enter>
     to confirm your choice.

  3. Choose <Add New Configs> and press <Enter> to display a list of Network
     Adapter Drivers.

  4. Choose <Other Driver> and press <Enter>.

  5. Insert the Driver Diskette or CD-ROM. Indicate the drive location 
     of the diskette or CD-ROM and select <OK> to proceed.

  6. Select the appropriate Network Adapter Driver from the list. For
     example, select "Accton EN5251 Series Chip Based Fast Ethernet Adapter",
     Select <OK> to confirm your choice.

  7. Select an appropriate protocol. Use the <Space> bar to highlight your
     choice.

  8. Select <OK> to confirm your choice.  A Configuration Complete message
     should appear on screen.

  9. Save the configuration. Select <Save>.

 10. Press <F3> to exit.




NDIS 2 Driver Installation on LAN Manager v2.2
==============================================

  1. Type "Setup" in the LAN Manager directory(i.e. C:\LANMAN.DOS) and press
     <Enter>. The Microsoft LAN Manager Setup screen should appear.

  2. Choose "Network Drivers" from the "Configuration" field. Press <Enter>
     to confirm your choice.

  3. Choose <Add New Config> and press <Enter> to display a list of Network
     Adapter Drivers.

  4. Insert the Driver Diskette or CD-ROM. Indicate the
     drive location of the diskette or CD-ROM.

  5. Choose <Other Driver> and press <Enter>.

  6. Select the appropriate Network Adapter Driver from the list.
     For example, select "Accton EN5251 Series Chip Based Fast Ethernet Adapter",
     Select <OK> to confirm your choice.

  7. Select an appropriate protocol. Use the <Space bar> to highlight your
     choice. If you have chosen the TCP/IP protocol, you will be prompted to
     key in the IP address, the subnet mask, and the default gateway
     (router). By default, the workstation number of the NetBios session is
     set to 6.
     Please consult Microsoft LAN Manager Installation Manual for more
     details, or check the online help.

  8. Select <OK> to confirm your choice.  A Configuration Complete message
     should appear onscreen.

  9. Save the configuration. Select <Save>.

 10. Press <F3> to exit.



If you are installing the LAN Manager for the first time, you will be
prompted to key in the default user name and domain of the workstation, as
well as to answer the questions concerning the Windows environment and
memory management. Just follow the instructions on the screen.


Sample Configuration Files
==========================

LAN Manager 2.0

  CONFIG.SYS File

      LASTDRIVE=Z
      BUFFERS = 35
      FILES = 35
      SHELL=C:\DOS50\COMMAND.COM C:\DOS50 /p /E:1024
      DEVICE=C:\HIMEM.SYS
      DEVICE=C:\DOS50\SETVER.EXE
      DOS=HIGH,UMB
      DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
      DEVICE=C:\LANMAN.DOS\DRIVERS\ACCTON\EN5251\EN5251.DOS
      DEVICE=C:\LANMAN.DOS\DRIVERS\PROTOCOL\NETBEUI\NETBEUI.DOS

  PROTOCOL.INI File

      [PROTOCOL MANAGER]
       DRIVERNAME = PROTMAN$
      [NETBEUI_XIF]
       Drivername = netbeui$
       BINDINGS = "EN5251_NIF"
      [EN5251_NIF]
     ;----------------------------------------------------------------------
     ; Sample Protocol.ini file for EN5251 NDIS 2 driver
     ;----------------------------------------------------------------------
       DriverName = EN5251$
     ; Slot = 1            ;; {1-4}
     ; MEDIA = AUTODETECT
     ;; {MEDIA = UTP, UTP_FD, UTP_100,UTP_100FD, AUTODETECT}
     ;----------------------------------------------------------------------
     ; End of this sample file

  AUTOEXEC.BAT File

        @echo off
        PROMPT $P$G
        PATH=c:\PE2;C:\DOS50;C:\NC;
        APPEND=C:\PE2;C:\DOS50;
        REM ====== LANMAN 2.0 === DO NOT MODIFY BETWEEN THESE LINES
        SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
        C:\LANMAN.DOS\DRIVERS\PROTMAN\NETBIND
        NET START WORKSTATION
        REM ====== LANMAN 2.0 === DO NOT MODIFY BETWEEN THESE LINES

LAN Manager 2.1 or LAN Manager 2.2

  CONFIG.SYS File

        LASTDRIVE=Z
        BUFFERS = 35
        FILES = 35
        SHELL=C:\DOS62\COMMAND.COM C:\DOS62 /p /E:1024
        DEVICE=C:\HIMEM.SYS
        REM DEVICE=C:\LANMAN.DOS\DRIVERS\DOSUTILS\EMM386.EXE NoEMS ;;delete
                                                                   ;;this
                                                                   ;;line
        DEVICE=C:\DOS62\SETVER.EXE
        DOS=HIGH,UMB
        DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
        DEVICE=C:\LANMAN.DOS\DRIVERS\ACCTON\EN5251\EN5251.DOS

  PROTOCOL.INI File

        [PROTMAN]
         DRIVERNAME = PROTMAN$
         DYNAMIC = YES
         PRIORITY = NETBEUI
        [NETBEUI_XIF]
         Drivername = netbeui$
         SESSIONS = 6
         NCBS = 12
         BINDINGS = "EN5251_NIF"
         LANABASE = 0

        [EN5251_NIF]
        ;-------------------------------------------------------------------
        ; Sample Protocol.ini file for EN5251 NDIS 2 driver
        ;-------------------------------------------------------------------
          DriverName = EN5251$
        ; Slot = 1            ;; {1-4}
        ; MEDIA = AUTODETECT
        ;; {MEDIA = UTP, UTP_FD, UTP_100,UTP_100FD, AUTODETECT}
        ;-------------------------------------------------------------------
        ; End of this sample file

  AUTOEXEC.BAT File

        @echo off
        PROMPT $P$G
        PATH=c:\PE2;C:\DOS62;C:\NC;
        APPEND=C:\PE2;C:\DOS62;
        @REM ====== LANMAN 2.1 === DO NOT MODIFY BETWEEN THESE LINES
        @REM=== LANMAN 2.1 ===
        SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
        NET START WORKSTATION
        LOAD NETBEUI
        @REM ====== LANMAN 2.1 === DO NOT MODIFY BETWEEN THESE LINES
        @REM === LANMAN 2.1 ===


All trademarks or brand names mentioned are properties of their respective
companies.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.18