AEC671X.dsk supports NetWare 386 v3.1x and v4.x IDE disk module .
ACARD Uttra IDE Netware driver have full support for standard IDE disk drives
AEC671X.dsk also contain a built-in ASPI manager. This allows for other
NetWare Loadable Modules (NLMs) to gain access to the IDE host adapter. AEC671X.dsk compatible with built-in SCSI driver which are CDROM.nlm, ASPITRAN.DSK and ASPICD.DSK.
:load AEC671X
1. Install Netware 3.12
Example <A>
OS : Netware 3.12(Diskette)
System : 486-66 with 8 MB memory
Fdd : 1.44 MB(Drive A)
Hdd : corner 1.2 GB IDE hard disk(Drive C)
Lan card: NE2000 compatible Ethernet
Install procedure
1. Make a small DOS partiton(20 MB).
2. Make a directory c:\server.312
3. Copy ACARD IDE driver(AEC671X.dsk) to directory c:\server.312 .
4. copy lan driver NE2000.lan to c:\server.312
5. Insert Netware 3.12 Install Diskette and run Install from Drive A:
6. Follow Netware 3.12 procedure then into Netware Command line prompt.
7. Load AEC671X.DSK from Drive c:\netware.312\AEC671X.DSK .
:load c:\netware.312\AEC671X <Enter>
8. Load Lan driver NE2000.lan
:load c:\netware.312\NE2000
:bind ipx to NE2000
9. Load Install
10. Partiton a Netware partition.
11. Create a Netware SYS: volume and mount SYS:.
12. Follow Netware Installation guide
Copy Netware System file and utility
13. Create file Startup.ncf and autoexec.ncf
1. Install Netware 4.x
Example <B>
OS : Netware 4.00(CDROM)
System : 486-66 with 16 MB memory
Fdd : 1.44 MB(Drive A)
Hdd : WD 1.0 GB IDE (Drive C)
CDROM : SONY CDU-521(Drive D on ARTOP SCSI-2)
Lan card : NE2000 compatible Ethernet
1. Make a small DOS partiton(20 MB).
2. Make a directory c:\server.40
3. Install CDROM drive as a MSDOS drive D:
4. Insert Netware 4.0 CDROM diskette.
5. Copy ACARD IDE driver(AEC671X.dsk) to directory
c:\server.40
6. load CDROM driver.(AEC671X.dsk)
7. Change directory to \netware.40\english then run INSTALL.BAT
8. Give server name and IPX number then follow install guide.
9. Select Load another(different) driver then press <Ins>,<F3>
select directory c:\server.40
then select AEC671X.DSK
10. Then continue to install.
11. Then Select automatically to install Hdd partition.
12. Select <F10> to save Volume.
13. Then you need insert [LICESE] floppy diskette.
14. Select <Alt><F10> exit to Netware command prompt.
15. Load and mount CDROM.
16. Load c:\netware.40\instll
17. Select Install a new V4.0 server.
18. Select <F3> to enter Directory CDVOL01:\netware.40\english
19. Follow Novell install guide to continue next procedure.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.