readme.txt Driver File Contents (AP20_SCSI_Pro_All_v1.01.exe)

	ADVANCD CD-ROM Driver
	=====================

Command Line Options:


/P
Pause after driver load.

/V
Verbose device information.

/L
Specifies that ADVANCD should scan for logical units.  (By
default, logical units are not scanned)

/D:name
Specifies the device name given the driver in your CONFIG.SYS
file for use with your CD-ROM interface software.  (The
default device name is ADVCD0, which will apply to all
connected CD-ROM drives.)

The line:

DEVICE=C:\path\ADVANCD.SYS

should be added to CONFIG.SYS or you can run our DOS install or WINDOWS
Setup. (WINDOWS SETUP should not be run in WIN 95 system, WIN 95 has
its own CD-ROM driver built in,.

The line

MSCDEX.EXE /D:ADVCD0

Should be added to AUTOEXEC.BAT.  The /D parameter provides MSCDEX
with the device name assigned to the CD-ROM driver. The MS-DOS drive
letters assigned to the CD Drive(s) start after the last logical hard
disk drive.  Additional information on MSCDEX.EXE usage is available
in the Programmer Guide for MSCDEX or directly from on-line help in
MS-DOS 6.X.

Note - The Windows and DOS based install programs will take
care of installing ADVANCD and MSCDEX, plus make all needed
modifications to CONFIG.SYS and AUTOEXEC.BAT.

	CD-ROM Driver Operation
	=======================

An MS-DOS CD-ROM driver is a translation layer that fits
between the Microsoft CD-ROM extensions (MSCDEX) and the
hardware-specific device manager (ADVASPI).  It translates
CD-ROM commands to ASPI commands, then translates ASPI
completion to CD-ROM completion.  It is normally called by
MSCDEX, but can be called directly from applications.  For more
information, see the MSCDEX Programmer Specification published
by Microsoft.

	What's New
	==========
Allows to read multi-session on Philips CDD2600.
Allows Toshiba 12x to work.
Also supports software eject for DOS and WINDOWS 3.1
Faster boot to DOS.

	
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.05