The fllow parameters are used in NET.CFG file of DOS/ODI client for user
to setup the DM9102AF/DM9102F/DM9009/DM9102AF+DM9801/DM9102AF+DM9802 adapter
(10/100 Fast Ethernet,10 Ethernet,1/10/100 Fast Ethernet LongRun/HomeRun)
SLOT 1 ;;Select Slot Number (FIRST Board)
AUTO ;;Autodetect 1M Home PNA and 10M/100M Ethernet Mode (Default)
AUTOFULL ;;Forced to Ethernet Full_Duplex (Auto-Speed) Mode
AUTOHALF ;;Forced to Ethernet Half_Duplex (Auto-Speed) Mode
100FULL ;;Forced to Ethernet 100M Full_Duplex Mode
100HALF ;;Forced to Ethernet 100M Half_Duplex Mode
10FULL ;;Forced to Ethernet 10M Full_Duplex Mode
10HALF ;;Forced to Ethernet 10M Half_Duplex Mode
SPEED 100 ;;Forced to Ethernet 100M Mode
SPEED 10 ;;Forced to Ethernet 10M Mode
1M ;;Forced to 1M Home PNA Mode (the same as 1MHSLP)
NODE ADDRESS 0223456789AB ;;Set Override Node Address
;***************************************************************************
; THE FOLLOWING PARAMETERS ARE USED ONLY FOR 1M HOME PNA SPECIFIC PURPOSE. *
; THE GENERAL USER DON'T NEED TO CARE ABOUT THE FOLLOWING PARAMETERS. *
;***************************************************************************
1MHSLP ;;Forced to 1M Home PNA High Speed/Low Power Mode
1MHSHP ;;Forced to 1M Home PNA High Speed/Low Power Mode
1MLSHP ;;Forced to 1M Home PNA High Speed/Low Power Mode
1MLSLP ;;Forced to 1M Home PNA High Speed/Low Power Mode
RXCMD ;;Enable to accept 1M Remote Command
SENDCMD ;;Enable to send 1M Remote Command
RXFLW ;;Enable Rx Flow Control
TXFLW ;;Enable Tx Flow Control
VLAN ;;Enable VLAN Function
SPEED1600 ;;For TUT LongRun Switch and HomeRun adapter support Speed 1600Kbps
SPEED1400 ;;For TUT LongRun Switch and HomeRun adapter support Speed 1400Kbps
SPEED500 ;;For TUT LongRun Switch and HomeRun adapter support Speed 500Kbps
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.