[+******************************************************************+]
[ DAVICOM Semiconductor Inc. ]
[ PCI Fast Ethernet Adapter (DM9102) ]
[ RPL BootROM Code Installation Guide ]
[ ]
[ (C) Copyright 1997-2000 DAVICOM Semiconductor Inc. ]
[ All Rights Reserved. ]
[====================================================================]
[ ]
[ Model Name : DM9102/DM9102A ]
[ ]
[ Driver Name : RBOOT.ROM ]
[ ]
[ Platform : NetWare Server, NT Server ]
[ ]
[ User Guide Version : v1.01 ]
[ ]
[-******************************************************************-]
The DM9102 RPL BootROM can remoteboot to MS-DOS from Novell Netware
Server or Microsoft Windows NT 3.5 Server or above, and remoteboot
to Windows 95 from Microsoft Windows NT 4.0 Server.
**************
* NOTICE !!! *
**************
The Remote Boot NT Server CANNOT use Microsoft Windows NT
Workstation version.
Topics :
========
A. Generate a RPL BootROM from the RBOOT.ROM Code
B. MS-DOS Remote Boot to Netware Server Installation
B-1. AUTOEXEC.BAT Sample File
B-2. CONFIG.SYS Sample File
B-3. NET.CFG Sample File
C. MS-DOS Remote Boot to NT Server Installation
C-1. DOSBB.CNF Sample File for DM9102
C-2. PROTOCOL.INI Sample File for DM9102
D. Windows 95 Remote Boot to NT Server Installation (ONLY for NT 4.0)
D-1. W95BB.CNF Sample File for DM9102
D-2. MSDOS.SYS Sample File for DM9102
D-3. CONFIG.SYS Sample File for DM9102
D-4. AUTOEXEC.BAT Sample File for DM9102
D-5. WIN.BAT Sample File for DM9102
D-6. MACHINES.INI Sample File for DM9102
A. Generate RPL Boot ROM from RBOOT.ROM Code :
==============================================
**********************************************************************
* Hardware Requiremment: *
* *
* 1. A EPROM Programming Machine *
* 2. A M27C512 EPROM (or others model EPROM) *
* 3. The DM9102 RPL BootROM Code (RBOOT.ROM) *
**********************************************************************
1. Use the EPROM Programming Machine to write RBOOT.ROM code
to the addresses 0000h, 4000h, 8000h, C000h of the M27C512 EPROM.
2. Please refer to the EPROM Programming Machine Operating Guide
for details.
B. MS-DOS Remote Boot to Netware Server Installation :
======================================================
**********************************************************************
* Hardware Requiremment: *
* *
* 1. A Netware Server with the RemoteBoot Service *
* 2. A Remote Boot Workstation with DM9102 PCI Adapter *
* 3. A Remote Boot Image Files Floppy Diskette *
* 4. A DAVICOM DM9102 PCI Fast Ethernet Adapter with RPL BootROM *
**********************************************************************
Installation Guide Topics:
1. Install the RemoteBoot Service on the Netware Server
2. Prepare a Remote Boot Image Files Floppy Diskette
3. Generate the Remote Boot Image File (NET$DOS.SYS)
to the Netware Server
1. Install the RemoteBoot Service on the Netware Server
(1) Startup the Netware Server.
(2) At the Netware Server Console, load the server LAN driver
with the frame type ETHERNET_802.2, and the other frame types
that you want to load, then bind the IPX protocol with all
frame types of the server LAN driver.
NW50: LOAD DM9PCI SLOT=3 FRAME=ETHERNET_802.2 NAME=E1_802.2
NW50: BIND IPX E1_802.2 NET=1111
(3) Login one workstation to the Netware Server.
(4) Insert the DM9102 Driver Diskette into the workstation floppy
drive (A:).
(5) Update the RPL.NLM file to the directory SYS:SYSTEM.
F:\> COPY F:\SYSTEM\RPL.NLM F:\SYSTEM\RPL.NL_
F:\> COPY A:\BOOTROM\NETWARE\RPL.NLM F:\SYSTEM
(6) Update the RBOOT.RPL file to the directory SYS:LOGIN.
F:\> COPY F:\LOGIN\RBOOT.RPL F:\LOGIN\RBOOT.RP_
F:\> COPY A:\BOOTROM\NETWARE\RBOOT.RPL F:\LOGIN
(7) Copy the RPLFIX.COM file to the directory SYS:LOGIN.
F:\> COPY A:\BOOTROM\NETWARE\RPLFIX.COM F:\LOGIN
(8) At the Netware Server Console, load RPL.NLM module and
bind the RPL protocol with the frame type ETHERNET_802.2
of the server LAN driver.
NW50: LOAD RPL
NW50: BIND RPL E1_802.2
(9) Now the Netware Server Remoteboot Service is working.
2. Prepare a Remote Boot Image Files Floppy Diskette
(1) Startup a workstation with MS-DOS prompt from a local disk.
(2) Insert a blank diskette into the floppy drive (A:),
and label this diskette as "RPL RemoteBoot Image Diskette".
(3) At the MS-DOS prompt, run the following command to format
the blank diskette.
C:\> FORMAT A:/S
(4) Copy the following files to the RPL RemoteBoot Image Diskette.
LSL.COM
IPXODI.COM
DM9PCI.COM
VLM.EXE
*.VLM <== All needed VLM modules files
HIMEM.SYS
(5) Create the following files to the RPL RemoteBoot Image Diskette.
(Please refer to the following sample files)
AUTOEXEC.BAT
CONFIG.SYS
NET.CFG
3. Generate the Remote Boot Image File (NET$DOS.SYS) to Netware Server
(1) Plug the DM9102 PCI adapter WITHOUT the DM9102 RPL
BootROM into the workstation PCI slot.
(2) Insert the RPL RemoteBoot Image Diskette into the floppy
drive (A:).
(3) Restart the workstation from the RPL RemoteBoot Image
Diskette.
(4) Login the workstation to the Remote Boot Netware Server.
(5) Generate the Remote Boot Image File (NET$DOS.SYS) into
the Remote Boot Netware Server by running the following
command, and copy the AUTOEXEC.BAT file from the floppy
diskette to the directory SYS:\, SYS:LOGIN and SYS:SYSTEM.
A:\> F:
F:\SYSTEM> CD \LOGIN
F:\LOGIN> \SYSTEM\DOSGEN A:
F:\LOGIN> RPLFIX NET$DOS.SYS
F:\LOGIN> FLAG NET$DOS.SYS SH
F:\LOGIN> COPY A:\AUTOEXEC.BAT F:\
F:\LOGIN> COPY A:\AUTOEXEC.BAT F:\LOGIN
F:\LOGIN> COPY A:\AUTOEXEC.BAT F:\SYSTEM
F:\LOGIN> FLAG F:\AUTOEXEC.BAT SH
F:\LOGIN> FLAG F:\LOGIN\AUTOEXEC.BAT SH
F:\LOGIN> FLAG F:\SYSTEM\AUTOEXEC.BAT SH
(6) Logout the workstation from the Remote Boot Netware Server.
(7) Remove the RPL RemoteBoot Image Diskette from the floppy
drive (A:).
(8) Power OFF the workstation.
(9) Plug the DM9102 RPL BootROM into the Boot ROM socket of
the DM9102 PCI Adapter.
(10) Plug the DM9102 PCI adapter WITH the DM9102 RPL BootROM
into the Remote Boot Workstation PCI slot.
(11) Restart the Remote Boot Workstation from the DM9102 RPL
BootROM.
(12) The Remote Boot Workstation will remoteboot to MS-DOS
from the Remote Boot Netware Server and specify the
Username (ADMIN) and Password to login the Remote Boot
Netware Server by the RPL BootROM.
B-1. AUTOEXEC.BAT Sample File :
===============================
@ECHO OFF
PROMPT $P$G
LSL
DM9PCI
IPXODI
VLM
F:
LOGIN ADMIN
CD \LOGIN
B-2. CONFIG.SYS Sample File :
=============================
DEVICE=HIMEM.SYS
DOS=HIGH
FILES=40
BUFFERS=20
LASTDRIVE=Z
B-3. NET.CFG Sample File :
==========================
Link Support
Buffers 8 1514
Link Driver DM9PCI
FRAME ETHERNET_802.2
FRAME ETHERNET_802.3
FRAME ETHERNET_II
FRAME ETHERNET_SNAP
NetWare DOS Requester
FIRST NETWORK DRIVE = F
NETWARE PROTOCOL = NDS BIND
C. MS-DOS Remote Boot to NT Server Installation :
=================================================
**********************************************************************
* Hardware Requiremment: *
* *
* 1. A Windows NT 4.0 Server with the RemotBoot Service *
* 2. A Remote Boot Workstation with DM9102 PCI Adapter *
* 3. A DAVICOM DM9102 PCI Fast Ethernet Adapter with RPL BootROM *
**********************************************************************
1. The network adapter of the Remote Boot NT Server must be
working properly.
2. At the NT Server, select "My Computer" -> "Control Panel"
-> "Network", select "Protocols" to add "DLC Protocol",
select "Services" to add "RemoteBoot Service", then reboot
the NT Server to take effect the new configuration.
3. At the NT Server, select "My Computer" -> "Control Panel"
-> "Services", select "RemoteBoot Service", then click "Start"
button to startup the Remote Boot Service.
4. Please check the \WINNT\RPL\RPLFILES directory has been shared
as "RPLFILES" for "Everyone" with "Full Control" Permission.
5. Follow the following step to create the New Profile Configuration
for MS-DOS Remote Boot.
(1) Go to MSDOS prompt, Copy DOS files to the NT Server.
(IMPORTANT !! The IO.SYS and MSDOS.SYS files in the
C:\WINNT\RPL\RPLFILES\BINFILES\DOSxxx subdirectory MUST
remove the "Read Only", "Hidden" and "System" attributes.)
COPY A:\DOS\*.* C:\WINNT\RPL\RPLFILES\BINFILES\DOSxxx (xxx: DOS VERSION)
ATTRIB -R -S -H A:\IO.SYS
ATTRIB -R -S -H A:\MSDOS.SYS
COPY A:\IO.SYS C:\WINNT35\RPL\RPLFILES\BINFILES\DOSxxx
COPY A:\MSDOS.SYS C:\WINNT35\RPL\RPLFILES\BINFILES\DOSxxx
ATTRIB +R +S +H A:\IO.SYS
ATTRIB +R +S +H A:\MSDOS.SYS
(2) Copy DM9102 NDIS2 Driver (DM9PCI.DOS) from Driver Diskette
A:\BOOTROM to C:\WINNT\RPL\BBLOCK\NDIS directory.
COPY A:\BOOTROM\DM9PCI.DOS C:\WINNT\RPL\BBLOCK\NDIS
(3) Create C:\WINNT\RPL\BBLOCK\NETBEUI\DM9PCI subdirectory, and
copy DOSBB.CNF and PROTOCOL.INI files from Driver Diskette
A:\BOOTROM\NTSRV to C:\WINNT\RPL\BBLOCK\NETBEUI\DM9PCI directory.
COPY A:\BOOTROM\NTSRV\DOSBB.CNF C:\WINNT\RPL\BBLOCK\NETBEUI\DM9PCI
COPY A:\BOOTROM\NTSRV\PROTOCOL.INI C:\WINNT\RPL\BBLOCK\NETBEUI\DM9PCI
(4) Run RPLCMD.EXE command to add the New Boot Name, the New
Configuration Name and the New Vendor Name for the New Adapter
Profile.
C:\WINNT\RPL> RPLCMD
Adapter Boot Config Profile Service Vendor Wksta [Quit]: b
Add Del Enum: a
BootName=DM9DOS
VendorName=00606E <== Change to your Node Address
BbcFile=BBLOCK\NETBEUI\DM9PCI\DOSBB.CNF
All other parameters are optional
BootComment=DOS 6.22 for DAVICOM DM9102
WindowsSize=0
Adapter Boot Config Profile Service Vendor Wksta [Quit]: c
Add Del Enum: a
ConfigName=DM9DOS
BootName=DM9DOS
DirName=DOS
DirName2=DOS622
FitShared=fits\dos622.fit
FitPersonal=fits\dos622p.fit
All other parameters are optional
ConfigComment=DOS 6.22 for DAVICOM DM9102
DirName3=
DirName4=
Adapter Boot Config Profile Service Vendor Wksta [Quit]: v
Add Del Enum: a
VendorName=00606E <== Change to your Node Address
VendorComment=DAVICOM Semiconductor, Inc.
Adapter Boot Config Profile Service Vendor Wksta [Quit]: q
(5) At the NT Server, select "Start" -> "Programs" -> "Administrative
Tools (Common)" -> "Remoteboot Manager", select "Check Configurations"
from "Configure" item of the "Remoteboot Manager - Local Machine"
dialog box to take effect new configurations.
(6) Select "New Profile" from "Remoteboot" item of the "Remoteboot
Manager - Local Machine" dialog box , select "DOS 6.22 for DAVICOM
DM9102" from "Configuration" field, then specify the New Profile
Name to "Profile Name" field, click "OK" button to create new profile.
6. After create the New Profile Name, plug the DM9102 adapter with
the DM9102 RPL BootROM into the Remote Boot Workstation PCI slot.
7. Startup the Remote Boot Workstation, the RPL BootROM will try to
remoteboot MS-DOS from the Remote Boot NT server.
8. At the NT Server, select "Start" -> "Programs" -> "Administrative
Tools (Common)" -> "Remoteboot Manager", select "Refresh" from
"View" item, the Remote Boot Client MAC Address will display into
the "Remoteboot Manager - Local Machine" dialog box, select the
MAC Address and select "Convert Adapters" from "Remoteboot" item
select "DOS 6.22 for DAVICOM DM9102" from "Wksta In Profile" item
then specify the New Workstation Name, click "Add" button.
9. Now the Remote Boot Workstation will remoteboot to MS-DOS prompt
from the Remote Boot NT Server by using DM9102 RPL BootROM, and
specify Username and Password to logon the Remote Boot NT Server.
C-1. DOSBB.CNF Sample File for DM9102 :
=======================================
; DOS on DAVICOM PCI Fast Ethernet Adapter (DM9102)
; (NOTICE !!! Execute the command from the Last Line to the First Line)
BASE D0H
RPL BBLOCK\RPLBOOT.SYS
LDR BBLOCK\RPLSTART.COM ~
DAT BBLOCK\NETBEUI\dm9pci\PROTOCOL.INI
DRV BBLOCK\RPLDISK.SYS ~ ~ ~
EXE BBLOCK\RPLPRO1.COM ~ 2 ~
EXE BBLOCK\I13.COM ~ ~ ~
EXE BBLOCK\RPLBIND2.EXE ~ ~
EXE BBLOCK\PROTMAN.EXE ~ ~
EXE BBLOCK\RPLBIND1.EXE ~ ~
;DRV BBLOCK\IPXNDIS.DOS ~ ~ ~
;DRV BBLOCK\TCPDRV.DOS /I:C:\LANMAN.DOS ~ ~
EXE BBLOCK\NETBEUI\NETBEUI.EXE ~ 10 ~
DRV BBLOCK\NDIS\dm9pci.DOS ~ ~ ~
DRV BBLOCK\PROTMAN.DOS /I:C:\LANMAN.DOS ~ M
C-2. PROTOCOL.INI Sample File for DM9102 :
==========================================
[protman]
drivername = protman$
dynamic = yes
priority = netbeui
[netbeui_xif]
drivername = netbeui$
bindings = dm9pci_nif
names = 6
ncbs = 12
packets = 20
pipeline = 10
sessions = 6
stacksize = 512
lanabase = 0
[xnsnb_xif]
drivername = xnsnb$
bindings = dm9pci_nif
load = xnsnb[cbr]
lanabase = 1
[xnstp_xif]
drivername = xnstp$
bindings = dm9pci_nif
load = xnstp[ub]
lanabase = 1
[tcpip_xif]
drivername = TCPIP$
disabledhcp = (TCPIP_NO_DHCP)
ipaddress0 = (TCPIP_ADDRESS)
subnetmask0 = (TCPIP_SUBMASK)
defaultgateway0 = (TCPIP_GATEWAY)
tcpsegmentsize = 1450
tcpwindowsize = 1450
nbsessions = 6
load = tcptsr[c],tinyrfc[c],emsbfr[cr]
unload = "unloadt /notsr[dc]"
bindings = dm9pci_nif
lanabase = 1
[ipx_xif]
drivername = ipx$
load = ipxmark[u],ipx[u]
unload = ipxrel[c]
bindings = dm9pci_nif
lanabase = 1
[msdlc_xif]
drivername = msdlc$
bindings = dm9pci_nif
load = msdlc[ub]
unload = msdlc[u]
[dm9pci_nif]
drivername = DM9PCI$ <== MUST be "DM9PCI$", char sensitive
D. Windows 95 Remote Boot to NT Server Installation (ONLY for NT 4.0) :
=======================================================================
(NOTICE !!! You MUST first install the MS-DOS remote boot client for NT
Server before install the Windows 95 Remote Boot Client for NT Server)
************************************************************************
* Hardware Requiremment: *
* *
* 1. A Windows NT 4.0 Server with RemotBoot Service with CD-ROM drive *
* 2. A Workstation running Windows 95 with CD-ROM drive *
* 3. Microsoft Windows NT Server 4.0 Resource Kit *
* 4. Microsoft Windows 95 Resource Kit with NETSETUP.EXE Utility *
* 5. A Remote Boot Workstation with floppy drive *
* 6. A DAVICOM DM9102 PCI Fast Ethernet Adapter with RPL BootROM *
************************************************************************
Installation Guide Topics:
1. Install Server-Based Setup (SBS) on NT Server
2. Install the Windows 95 Remote Boot Client for NT Server
1. Install Server-Based Setup (SBS) on NT Server
(1) Startup Windows NT 4.0 Remote Boot Server.
(2) At the NT Server, create \WIN95SRV directory for SBS Server,
and share \WIN95SRV as "WIN95SRV" for "RPLUSER" and
"Administrators" users with "Full Control" permission.
(3) At the NT Server, select "Start" -> "Programs" ->
"Administrative Tools (Common)" -> "User Manager for Domains",
select "New User" from "User" item of the "User Manager -
DOMAIN" dialog box, specify Username and Password for Windows 95
workstation, click "Groups" button -> select "Administrators"
-> click "Add" button -> click "OK" button to add
Administrators Permission, click "Add" button to completely
create new user, click "Close" button to quit new user dialog
box.
(4) Startup Windows 95 Workstation with CD-ROM drive, enter
Username and Password to logon NT Server.
(P.S.: This user MUST be "Administrators" user.)
(5) Insert Microsoft Windows 95 Resource Kit into Windows 95
CD-ROM drive.
(6) In Windows 95 Explorer, switch to the ADMIN\NETTOOLS\NETSETUP
directory of CD-ROM drive, double-click NETSETUP.EXE.
(7) In the Server-Based Setup dailog box, click "Set Path" button,
and specify the path to SBS Server (\\NT40SRV\WIN95SRV),
then click "OK" button.
(8) Click "Install" button, choose "Server" option from "Install
Policy" dialog box, check the Source Directory and Destination
Directory, click "OK" button.
(9) Click "Don't Create Default" button from "Create Default"
dialog box.
(10) Enter Windows 95 CD Key Number to "CD Key" dialog box, click
"OK" button to install the SBS files to NT Server.
(11) After completely install the SBS files to NT Server,
insert Microsoft Windows NT Server 4.0 Resource Kit into
Windows NT Server CD-ROM drive.
(12) At the NT Server, go to MSDOS prompt, change the directory
to the \CLIENTS\RPL\UPDATE\WIN95 directory of CD-ROM drive,
and run the following command to update the Windows 95
SBS files for Remote Booting.
D:\CLIENTS\RPL\UPDATE\WIN95> WIN95SRV.BAT C:\WIN95SRV
2. Install the Windows 95 Remote Boot Client for NT Server
(1) At the NT Server, create \WINNT\RPL\CLIENTS directory for
Windows 95 Remote Boot Clients and share \WINNT\RPL\CLIENTS
as "CLIENTS" for "RPLUSER" and "Administrators" users with
"Full Control" permission.
(2) At the NT Server, follow the following step to create
the New Profile Configuration for Windows 95 Remote Boot.
a) Copy the DM9102 NDIS2/3 driver (DM9PCI.DOS and DM9PCI.SYS)
from Driver Diskette A:\BOOTROM to C:\WIN95SRV directory.
COPY A:\BOOTROM\DM9PCI.DOS C:\WIN95SRV
COPY A:\BOOTROM\DM9PCI.SYS C:\WIN95SRV\SYSTEM
b) Copy W95BB.CNF file from Driver Diskette A:\BOOTROM\NTSRV
to C:\WINNT\RPL\BBLOCK\NETBEUI\DM9PCI directory.
COPY A:\BOOTROM\NTSRV\W95BB.CNF C:\WINNT\RPL\BBLOCK\NETBEUI\DM9PCI
c) Run RPLCMD.EXE command to add the New Boot Name, the New
Configuration Name and the New Vendor Name for the New Adapter
Profile.
C:\WINNT\RPL> RPLCMD
Adapter Boot Config Profile Service Vendor Wksta [Quit]: b
Add Del Enum: a
BootName=DM9W95
VendorName=00606E <== Change to your Node Address
BbcFile=BBLOCK\NETBEUI\DM9PCI\W95BB.CNF
All other parameters are optional
BootComment=Windows 95 for DAVICOM DM9102
WindowsSize=0
Adapter Boot Config Profile Service Vendor Wksta [Quit]: c
Add Del Enum: a
ConfigName=DM9W95
BootName=DM9W95
DirName=DOS
DirName2=WIN95
FitShared=fits\win95.fit
FitPersonal=fits\win95p.fit
All other parameters are optional
ConfigComment=Windows 95 for DAVICOM DM9102
DirName3=
DirName4=
d) At the NT Server, select "Start" -> "Programs" ->
"Administrative Tools (Common)" -> "Remoteboot Manager", select
"Check Configurations" from "Configure" item of the "Remoteboot
Manager - Local Machine" dialog box to take effect new
configurations.
e) Select "New Profile" from "Remoteboot" item of the "Remoteboot
Manager - Local Machine" dialog box, select "Windows 95 for
DAVICOM DM9102" from "Configuration" field, then specify
the New Profile Name to "Profile Name" field, click "OK" button
to create new profile.
(3) Plug DM9102 PCI Fast Ethernet adapter with RPL BootROM into
the Remote Boot Workstation.
<<< NOTICE !! >>>
Please make sure the Remote Boot Workstation WITH the floppy
drive (Drive A:) but WITHOUT the hard disk drive.
(4) Startup the Remote Boot Workstation, the RPL BootROM will
try to remoteboot MS-DOS from NT server.
(5) At the NT Server, select "Start" -> "Programs" -> "Administrative
Tools (Common)" -> "Remoteboot Manager", select "Refresh" from
"View" item, the Remote Boot Client MAC Address will display
into the "Remoteboot Manager - Local Machine" dialog box, select
the MAC Address and select "Convert Adapters" from "Remoteboot"
item select "DOS 6.22 for DAVICOM DM9102" from "Wksta In Profile"
item then specify the New Workstation Name, click "Add" button.
(6) At the NT Server, select "Start" -> "Programs" ->
"Administrative Tools (Common)" -> "User Manager for Domains",
double-click the New Remote Boot Username from the "User Manager
- DOMAIN" dialog box, click "Groups" button -> select
"Administrators" -> click "Add" button -> click "OK" button
-> click "OK" button to add Administrators Permission for
the Remote Boot Workstation.
(7) At the Remote Boot Workstation, specify Username and Password
to logon the NT Server.
(P.S.: This user MUST be "Administrators" user.)
(8) At the Remote Boot Workstation, run the following to map drives
to \\NT40SRV\WIN95SRV and \\NT40SRV\CLIENTS shared directories.
C:\> NET USE F: \\NT40SRV\WIN95SRV
C:\> NET USE G: \\NT40SRV\CLIENTS
(9) Change the drive to F: and run the following command to install
the First Windows 95 Remot Boot Client.
C:\> F:
F:\> SETUP
(10) Make the following decisions during setup :
a) In the Server-Based Setup dialog box, choose "Set up
Windows to run from a network server".
b) In the Startup Method dialog box, choose "Start Windows
from the network (remote boot server)".
c) In the Machine Directory dialog box, enter "G:\CLIENT1"
into the Machine Directory field.
d) In the Setup Options dialog box, choose "Custom" Setup.
e) In the User Information dialog box, specify the User Name
and Company Name informations.
f) In the Analyzing Your Computer dialog box, choose
"No, I want to modify the hardware list", exclude as many
hardware types and items from auto-detection as possible.
(Try to exclude all items except Display and Keyboard items)
g) In the Select Components dialog box, remove "Communications"
component.
h) In the Network Configuration dialog box, click "Add" button
-> select "Adapter" -> click "Add" button -> click "Have Disk"
button -> insert DM9102 driver diskette into floppy and type
"A:\BOOTROM" for driver path to install Windows 95 NDIS3 driver
for remoteboot Windows 95 client.
i) In the Network Configuration dialog box, select "Client for
Microsoft Networks", click "Properties" button, choose
"Quick logon" from "Network logon options" field and click
"OK" button.
j) In the Network Configuration dialog box, select "Windows Logon"
from "Primary Network Logon" field.
k) In the Identification dialog box, specify the Computer
Name and Workgroup Name and make sure the Workgroup Name
is the same as the Domain Name of the Remote Boot NT server.
l) In the Computer Settings dialog box, check the all hardware
devices information are correct, click "Next" button to
continue the installation.
m) Following the screen prompt to complete Windows 95 client
pre-installation.
(11) At the NT Server, select "Start" -> "Programs" ->
"Administrative Tools (Common)" -> "Remoteboot Manager",
DELETE the Workstation Name of the Remote Boot Workstation
from the "Remoteboot Manager - Local Machine" dialog box.
(12) At the NT Server, you must MANUALLY edit the following files
in the \WINNT\RPL\CLIENTS\CLIENT1\SUBOOT directory.
All files are in ASCII format and can be edited using any
Text Editor such as EDIT.COM.
(Please refer to the following sample files for DM9102)
MSDOS.SYS
CONFIG.SYS
WIN.BAT
AUTOEXEC.BAT
(13) At the NT Server, go to MSDOS prompt, change the directory
to the \WINNT\RPL\BIN directory and run the following command
to copy some remoteboot files from CLIENT1\SUBOOT directory
to PROFILES\DM9W95\SUBOOT directory.
WIN95CLT.BAT \WINNT\RPL\CLIENTS\CLIENT1 \\NT40SRV DM9W95
<<< NOTICE !! >>>
Here, please make sure the DM9102 NDIS2 driver (DM9PCI.DOS)
has been copied into the \WIN95SRV, \WINNT\RPL\BBLOCK\NDIS,
\WINNT\RPL\RPLFILES\PROFILES\DM9W95\SUBOOT, \WINNT\RPL\CLIENTS
\CLIENT1\SUBOOT directories and the DM9102 NDIS3 driver
(DM9PCI.SYS) has been copied into the \WIN95SRV\SYSTEM directory.
(14) At the NT Server, change the directory to the \WIN95SRC
directory to edit the MACHINES.INI file and add the following
lines for the new clients.
[00606E00E925] <== Must match with your node address
SYSDATPATH=G:\CLIENT1
G=\\NT40SRV\CLIENTS
(15) Restart the Remote Boot Workstation, the RPL BootROM will
try to remoteboot Windows 95 from NT server to continue
the Windows 95 client installation.
(16) At the NT Server, select "Start" -> "Programs" -> "Administrative
Tools (Common)" -> "Remoteboot Manager", select "Refresh" from
"View" item, the Remote Boot Client MAC Address will display
into the "Remoteboot Manager - Local Machine" dialog box, select
the MAC Address and select "Convert Adapters" from "Remoteboot"
item select "Windows 95 for DAVICOM DM9102" from "Wksta In Profile"
item then specify the New Workstation Name, click "Add" button.
(17) At the NT Server, select "Start" -> "Programs" -> "Administrative
Tools (Common)" -> "User Manager for Domains", double-click
the New Remote Boot Username from the "User Manager - DOMAIN"
dialog box, click "Groups" button -> select "Administrators"
-> click "Add" button -> click "OK" button -> click "OK" button
to add Administrators Permission for the Remote Boot Workstation.
(18) At the Remote Boot Workstation, specify Username and Password
to logon the NT Server, the client will now boot to
Windows 95 and continue to setup Windows 95 configuration,
sometimes it will occur some errors and prompt you to
reboot your system, just do it, and after startup Windows 95
again, Windows 95 setup will prompt you to specify the Time Zone
information and configure printer device, then prompt you
Windows 95 setup program finished and restart your computer
to complete the Windows 95 client installation.
D-1. W95BB.CNF Sample File for DM9102 :
=======================================
; Windows 95 on DAVICOM PCI Fast Ethernet Adapter (DM9102)
BASE D0H
RPL BBLOCK\RPLBOOT.SYS
LDR BBLOCK\RPLSTART.COM ~
DAT BBLOCK\NETBEUI\dm9pci\PROTOCOL.INI
DRV BBLOCK\RPLDISK.SYS ~ ~ ~
EXE BBLOCK\RPLPRO1.COM ~ 2 ~
EXE BBLOCK\RPLBIND2.EXE ~ ~
EXE BBLOCK\PROTMAN.EXE ~ ~
EXE BBLOCK\RPLBIND1.EXE ~ ~
;DRV BBLOCK\IPXNDIS.DOS ~ ~ ~
;DRV BBLOCK\TCPDRV.DOS /I:C:\LANMAN.DOS ~ ~
EXE BBLOCK\NETBEUI\NETBEUI.EXE ~ 10 ~
DRV BBLOCK\NDIS\dm9pci.DOS ~ ~ ~
DRV BBLOCK\PROTMAN.DOS /I:C:\LANMAN.DOS ~ M
EXE BBLOCK\W95I13.COM ~ ~ ~
D-2. MSDOS.SYS Sample File for DM9102 :
=======================================
[Paths]
WinDir=g:\client1
WinBootDir=d:\winboot <== According to RAMDRIVE.SYS assign
HostWinBootDrv=c Virtual Drive (D: or E:)
[Options]
BootMulti=1
BootGUI=1
Network=1
LoadTop=0
Logo=0
D-3. CONFIG.SYS Sample File for DM9102 :
========================================
device=c:\himem.sys /testmem:off
device=c:\ramdrive.sys 1440 /e
devicehigh=c:\ifshlp.sys
lastdrive=z
stacks=16,512
D-4. AUTOEXEC.BAT Sample File for DM9102 :
==========================================
@if not exist d:\winboot\nul mkdir d:\winboot
@copy c:\ d:\winboot
d:
cd \winboot
D-5. WIN.BAT Sample File for DM9102 :
=====================================
set comspec=d:\winboot\command.com
nwrpltrm
fixmem
snapshot /s /b:d
setmdir /m /r:d:\winboot
net start
net logon <username> /savepw:no /y
net use f: \\nt40srv\win95srv
net use g: \\nt40srv\clients
path=f:\;f:\command;g:\client1\system;
setmdir
set comspec=d:\winboot\command.com
win.com
D-6. MACHINES.INI Sample File for DM9102 :
==========================================
;Windows 95 MACHINES.INI
;[node address]
;SYSDATPATH=x:\<home directory>
;x=\\server\share
[00606E00E303] <== Must match with your node address
SYSDATPATH=g:\client1
g:=\\nt40srv\clients
<<< End of file >>>
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.