7 Workstation: Windows NT with NetWare Client Services
Windows* NT* 4.0 and Novell NetWare client Services Driver Installation
notes
=======================================================================
Location of driver: \NWSERVER\E100B.LAN
\NWSERVER\OEMSETUP.INF
General Instructions for Novell NetWare* Client Services Under Windows
NT Using the ODI Server Driver
======================================================================
1 Install the Novell NetWare Client Services per the instructions
provided by Novell.
Note: If the NDIS driver for the PRO/100+ is installed and you want
to us the NetWare 32 ODI LAN driver, remove the NDIS driver
from NT before going to step 2. Novell NetWare Client service
can be run with the NDIS 3 driver.
2 Start Windows NT and log in as ADMINISTRATOR (or another valid user
name).
3 Double click the Network icon in the Control Panel. The "Network
Settings" screen appears.
4 Select the Adapter tab.
5 Click the Add button.
6 Click the Have Disk button.
7 Insert the Configuration and Drivers disk into your drive and
enter the pathname <drive>:\nwserver. Click OK to continue.
8 When "ODI Intel PRO/100+ adapter for NetWare" appears,
click OK.
9 After the files are copied, the default driver settings will be
displayed (they'll be displayed with their defaults which in most
cases is OK). Click OK when correct.
Note: Do not click on Advanced Settings. See the section titled
Advanced Setting below.
Speed: Specifies the line speed of the adapter.
0 = Auto detect (default)
10 = 10 Mbps
100 = 100 Mbps
ForceDuplex:
Note: The PRO/100+ TX adapter supports full duplex at 10 and 100
Mbps. The PRO/100B T4 adapter does not support full duplex at
100 Mbps. It does at 10 Mbps.
0 = auto-negotiate (default)
1 = half duplex
2 = full duplex
Note: If the adapter is set to half or full duplex, set the SPEED
parameter to either 10 or 100. (see SPEED)
10 Restart Windows NT to complete the installation.
Advanced Settings
=================
Only select Advanced Settings if you want to use local Administration of
Addressing or use multiple PRO/100+ adapters. Entering
Advanced Setting requires that you know the slot number the adapter is
using.
1 To get to Advanced Setting from the Network Dialog box selected the
Adapters tab and highlight the ODI PRO/100+ adapter
and click Configure.
2 Click Advanced.
3 There are 2 advanced options, Node Address Override and Slot.
Node Address Override: Use this option to provide your own unique
node address for the adapter. The node address is a 12-digit
hexadecimal number; the second digit must be one of the following
digits: 2, 6, A, E.
SLOT: Select the slot number the adapter is in. Only necessary if
multiple PRO/100+ adapter cards are being used. Before clicking OK,
you must enter a valid slot number. To exit without saving a slot
number, click Cancel.
* Third-party trademarks are the property of their respective owners.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.