Davicom DM9000 WinCE.net Driver v3.0 Release Note
The Davicom DM9000 NDIS CE miniport device driver is used to be
the network component of the Microsoft WinCE.net enables hardware
containing Davicom's fast ethernet controller 'DM9000'.
This file describes the procedures of the driver installation. Note that
this is not written for end-users.
CONTENTS:
Readme.txt - This file
dm9000.msi - The binary release file
1. Installation
Run the dm9000.msi to install the binary release.
The package contains the following files.
$(_winceroot)\public\common\oak\lib\x86\debug\dm9000.def
$(_winceroot)\public\common\oak\lib\x86\debug\dm9000.lib
$(_winceroot)\public\common\oak\lib\x86\debug\dm9000.pdb
$(_winceroot)\public\common\oak\lib\x86\retail\dm9000.def
$(_winceroot)\public\common\oak\lib\x86\retail\dm9000.lib
$(_winceroot)\public\common\oak\lib\x86\retail\dm9000.pdb
$(_winceroot)\public\common\oak\files\dm9000\config.bi_
$(_winceroot)\public\common\oak\files\dm9000\project.bi_
$(_winceroot)\public\common\oak\files\dm9000\project.re_
2. Platform Configuration
2.1 Add 'dm9000' target to the root makefile.
Open the file $(_winceroot)\public\common\cesysgen\makefile
Append 'dm9000' to all 'dc21x4' rules or dependencies.
2.2 Modify your cesysgen.bat, to add 'dm9000' to CE_MODULES
<e.g.>
$(_winceroot)\public\<your project>\wince400\cepc\oak\misc\cesysgen.bat
set CE_MODULES=dm9000 %CE_MODULES%
2.3 Modify your project.bib for module definition
<e.g.>
MODULES
dm9000.dll $(_FLATRELEASEDIR)\dm9000.dll NK SH
3. Driver Configuration
3.1 In the file project.reg, add the following registry values.
<e.g.>
[HKEY_LOCAL_MACHINE\Comm\DM9CE]
"DisplayName"="DM9000 Fast Ethernet Adapter"
"Group"="NDIS"
"ImagePath"="dm9000.dll"
[HKEY_LOCAL_MACHINE\Comm\DM9CE\Linkage]
"Route"=multi_sz:"DM9CE1"
[HKEY_LOCAL_MACHINE\Comm\DM9CE1]
"DisplayName"="DM9000 Fast Ethernet Adapter"
"Group"="NDIS"
"ImagePath"="dm9000.dll"
[HKEY_LOCAL_MACHINE\Comm\Tcpip\Linkage]
"Bind"="dm9pci1"
[HKEY_LOCAL_MACHINE\Comm\DM9CE1\Parms]
"BusNumber"=dword:0
"BusType"=dword:1
"XmitBuffer"=dword:A
"RecvBuffer"=dword:20
[HKEY_LOCAL_MACHINE\Comm\DM9CE1\Parms\TcpIp]
"EnableDHCP"=dword:0
"UseZeroBroadcast"=dword:0
"DefaultGateway"="x.x.x.x."
"IpAddress"="x.x.x.x."
"Subnetmask"="x.x.x.x"
"DNS"="x.x.x.x"
"WINS"="x.x.x.x"
3.2 TCP/IP configurations
3.2.1 EnableDHCP
Set 1 for DHCP enable, 0 for disable.
3.2.2 UseZeroBroadcast
Set 1 for use zero broadcast, 0 for not.
3.2.3 DefaultGateway
Specify your gateway address in x.x.x.x format.
3.2.4 IpAddress
Specify your IP address in x.x.x.x format.
3.2.5 Subnetmask
Specify your subnet mask in x.x.x.x format.
3.2.6 DNS
Specify your domain name server's address in x.x.x.x format.
3.2.7 WINS
Specify your WINS server's address in x.x.x.x format.
------------------------------------------------------------------------------
All trademarks or brand names mentioned are trademarks and registered trademarks
of their respective companies.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.