[VERIFYERR] 0=No error 1=Files are different 2=CD File is missing 3=File on harddisk is missing 4=CD File is inaccessible 5=HD File is inaccessible 6=Read error on CD file 7=Read error on harddisk file 8=Directory missing on CD 9=Directory missing on harddisk 10=Cannot mount the written CD 11=Don't know the drive letter for the recorder! 12=Unknown verify error 13=Status summary 14=Out of memory 15=I/O error while reading the filesystem structure 16=Error caused by corrupt filesystem structure 17=Error caused by supplying wrong parameters to the fs 18=Too many locks of the filesystem buffers [ANTIVIRSCAN] 0=No Error 1=File is probably infected by a virus 2=File could not be cured 3=File was cured successfully 4=An unknown error occured during the virus scan 5=Out of memory during the virus scan 6=A read error occured during the virus scan 7=File might be infected by an unknown virus [VQFITEM] -1=Unknown VQF item error. 1=Cannot open the VQF file. 2=Write error in destination file. 3=Cannot open the VQF decoder. 4=Unsupported audio format. Need 44.1kHz, 16 bit, stereo. 5=Out of memory. 6=Error decoding the VQF file. 7=Error calculating the VQF filter effect. [WMAITEM] -1=Don't know, what went wrong 0=No Error 1=The MS Audio Codec is not installed 2=Nero does not have the right to open this MS Audio item 3=Error during Unicode character conversion 4=Cannot find the Nero MS Audio DLL 'NeWMAEnc.DLL' 5=Cannot open the MS Audio Codec 6=Cannot determine the format of the MS Audio file 7=Unsupported audio format. Need 44.1kHz, 16 bit, stereo 8=Cannot read the file's attributes 9=Cannot initialize the audio queue 10=Cannot start the MS Audio decoding process 11=Cannot stop the MS Audio decoding process 12=Seek error within the MS Audio file 13=Cannot open the audio output device 14=Cannot open or write the temporary cache file for the MS Audio file. Disk full!?! 15=Not enough memory to decode MS Audio file 16=Cannot calculate the filter effect [WMAENCODER] -1=Unknown WMA encoder error. 1=Wrong arguments passed to the encoder 2=Not enough memory to encode MS Audio file 3=Error while converting strings to unicode 4=Cannot create the MS Audio writer 5=Wrong input format for WMA encoding 6=Wrong output format for WMA encoding 7=Error while setting the WMA attributes 8=Error while sending sample to the WMA encoder [MPEG3ENCODER] -1=Unknown MP3 encoder error. 1=Wrong arguments passed to the encoder 2=Not enough memory to encode MP3 3=Cannot open the MP3 encoder library 4=Cannot get the MP3 encoder configuration 5=Cannot set the MP3 encoder configuration 6=Cannot get the list of supported formats 7=Unsupported MP3 file format 9=Cannot set the MP3 file format 10=Cannot create the MP3 output file 11=Write error in the output file 12=Cannot close the MP3 file 13=Cannot delete the MP3 file [MPEGAUDIOITEM] 1=Lost sync within the MP3 stream. Bad MP3 file? 2=Cannot open the MP3 file. 3=Unexpected MP3 file format. 4=Read error within the MP3 file., 5=Out of memory 6=Seek error within the MP3 file. [WAVEAUDIOITEM] -1=Out of memory -2=Can't open wave file! -3=Unexpected file format! -4=Read error in wave file! -5=Nero supports only PCM wave files! -6=Unsupported wave sample format! -7=Internal error: Init is missing! -8=Internal error! [AVIVCDFILEITEM] -100=Video MPEG encoder not available -101=Invalid Video MPEG encoder DLL -102=This version of the Video MPEG encoder DLL is not compatible -103=Cannot create a temporary filename -104=MPEG2 plugin not installed -105=Unknown error in the Video MPEG encoder 1=Not enough memory 2=Not enough encoding parameters given to the encoder 3=Unable to open the file 4=Encoding interrupted by the user 5=Cannot start video encoder 6=The parameters were not accepted by the encoder 7=Invalid video format 8=Error creating video format 9=Cannot open output file 10=Error during encoding 11=Decoder not ready 12=Cannot get bitmap 13=Disk full 14=Error retrieving information 15=The encoder cannot produce this output format [HDSCSIPFILE] -1=Read error on SCSI device! -2=Out of memory! -3=Seek error on SCSI device! -4=Illegal call (internal error)! [HFSIMAGEITEM] -1=Read error on SCSI device! -2=Out of memory! -3=Illegal call (internal error)! [ISODOC] -1=Error writing multisession info file! -2=Error inserting multisession info file into compilation! -3=Error recreating multisession CD stamp! -4=Fatal error while trying to read HFS data from SCSI harddisk! -5=Fatal error while trying to read boot image data! [W95PARTREADFILE] -1=Illegal logical drive specified! -2=Can´t access vwin32.dll! -3=Drive locking failed! -4=Seek within logical drive failed! -5=Open/Close mismatch! -6=Read error! -7=Can´t get drive information! -8=Can´t write on a logical device! [TRANSFER] 1=User aborted 2=Error opening file 3=Error closing file 4=Error reading file 5=Error reading cache file -1=General Error -2=Error: function not implemented -3=Error: no user interface -4=Error: phase error -5=Error: not enough memory -6=Error writing file -7=Error opening cache file -8=Error writing cache file -9=Error: no driver -10=Wrong Version -11=Error accessing cache file -12=Capability cannot be changed -13=Error reading cache file -14=Error writing cache file -15=Cache file too small -16=Could not perform StartTrack -17=Could not perform ReadBuffer -18=Could not perform EndTrack -19=Could not perform Fixation -20=Could not perform Write -21=Error reading Audio -22=Cannot cache with Audio-CD -23=Currently ISO images may only be written on empty CDs! -24=Could not perform end of Disc At Once -25=Error reading Data -26=Recorder doesn´t support Disc At Once -27=Could not perform start of Disc At Once -28=Could not generate CD Text information -30=Cannot write track at correct position with this recorder -31=Cannot write compilation in DAO to this recorder -32=Cannot write compilation in TAO to this recorder -33=Error building internal DAO structures -34=Cannot write compilation to selected recorders simultaneously -35=Invalid track info -36=Could not perform StartDisk -37=Could not perform StartSession -38=Could not perform StartTAO -39=Could not perform EndSession -40=Could not perform EndDisk [IMAGECOMP] -1=Not enough memory -2=Read error in image file -3=Image file has illegal format -4=Illegal function/method call -5=Error building internal DAO structures -6=Strange obscure internal error of unknown kind [CDR] -1 =Unspecified Recorder Error -2 =Bad DLL version -3 =Recorder function not implemented -4 =Recorder function not supported -14 =Capability read only -15 =Capability unknown -20 =Queuing failed -21 =Waitqueue failed -22 =Abortqueue failed -23 =Out of memory -24 =Waitqueue timeout -100 =Parameter error -101 =Invalid trackinfo -102 =Invalid fixinfo -103 =Invalid trackmode -104 =Invalid pause length -200 =Internal state error -201 =Invalid writestate -999 =No SCSI/IDE command -1000=SCSI/IDE error -1001=Absorption control error -1002=Application code conflict -1003=ATIP time miscompare -1004=Attempt to cross track boundary -1005=Audio play aborted -1006=Audio play stopped due to error -1007=Barcode reading error -1008=Blocksize conflict -1009=Blocksize format conflict -1010=Buffer data size error -1011=Buffer error during recording -1012=Buffer overflow -1013=Buffer underrun -1014=Calibration area allmost full -1015=Calibration area full -1016=Cannot read ATIP -1017=Cannot recover from leadin -1018=Cannot recover from leadout -1019=Cannot recover from PMA -1020=Cannot recover from callibration area -1021=Cannot recover from track -1022=Command currently not valid -1023=Command sequence error -1024=Communication failure -1025=Current command aborted -1026=Current program area empty -1027=Damaged track present -1028=Damaged track detected -1029=Data track length error -1030=Diagnostic failure -1031=Disc is write protected -1032=Disc style mismatch -1033=Drive not ready -1034=Dummy blocks added -1035=EEPROM failure -1036=End of medium reached -1037=End of user area of this track -1038=Exist packet write area -1039=Focus or tracking error -1040=Illegal block size for command -1041=Illegal cue sheet -1042=Illegal cue sheet length -1043=Illegal cue sheet parameter -1044=Illegal field in command -1045=Illegal form for reserved track -1046=This CD is not a CD-Recordable -1047=Illegal mode for this track -1048=Illegal packet mode -1049=Illegal reserve length -1050=Illegal reserve packet length -1051=Illegal track -1052=Illegal track descriptor table -1053=Illegal track descriptor unit -1054=Illegal track mode -1055=Illegal track number -1056=Illegal track status -1057=Illegal transfer length -1058=Inappropriate command -1059=Initiator detected error message received -1060=Internal controller error -1061=Internal target failure -1062=Invalid audio address -1063=Invalid bits in identify message -1064=Invalid block address -1065=Invalid command -1066=Invalid field in command -1067=Invalid field in parameter -1068=Invalid LUN -1069=Invalid message error -1070=Invalid start address -1071=Laser current over -1072=Laser adjustment error -1073=Link area encountered -1074=Link blocks encountered -1075=Logical unit is reserved -1076=Medium changed -1077=Medium format corrupted -1078=Medium load mechanism failed -1079=Medium load or eject failure -1080=Medium not present -1081=Medium removal prevented -1082=Message error -1083=Mode parameters changed -1084=Monitor ATIP error -1085=Non existent block encountered -1086=Not enough space -1087=Not ready to ready transition -1088=No additional sense information -1089=No barcode available -1090=No EFM at search address -1091=No packet -1092=No pregap -1093=No seek complete -1094=No TOC -1095=No track for finalize -1096=Operator medium removal requested -1097=Overlapped command attempted -1098=Packet size mismatch -1099=Parameter list length error -1100=Parameter list too long -1101=Parity error -1102=PCA area full -1103=PMA area full -1104=Positioning error -1105=Power calibration error -1106=Power calibration error -1107=Program area not empty -1108=Recovered data with ECC -1110=Recovered data with retries -1111=Recovery needed -1112=Request for fixation failed -1113=Reserved track present -1114=Reset occurred -1115=Select or reselect failure -1116=Selftest failure -1117=Stopped on non data block -1118=Track at once not in PMA -1119=Track following error -1120=Tray out -1121=Unable to read TOC, PMA or subcode -1122=Unable to recover TOC -1123=Unable to reserve track, because track mode has been changed -1124=Unknown medium format -1125=Unrecordable disc -1126=Unrecoverable damaged track cause too small writable area -1127=Unrecoverable track descriptor encountered -1128=Unrecoverable read error -1129=Unwritten area encountered -1130=Verify failed -1131=Write append error -1132=Write busy -1133=Write complete -1134=Write data error with CU -1135=Write error -1136=Write illegal block length -1137=Write operation in progress -1138=Writing leadin or leadout in progress -1139=Audio play in progress -1140=Audio play completed -1141=Invalid parameter list length -1142=Synchronous data transfer error -1143=Blank CD -1144=No PMA -1145=OPC initialization error -1146=OPC execution error -1147=OPC ALPC error -1148=OPC timeout -1149=Read address is ATIP -1150=Write address is EFM -1151=Write emergency occurred -1152=Medium speed error -1153=Medium no identification -1154=Medium not supported -1155=Write emergency -1156=Servo error -1157=PLL error -1158=Address error -1159=Header monitor error -1160=Header search error -1161=EDC error -1162=Link/RI/RO error -1163=CDBD overrun error -1164=Write audio on reserved track -1165=Hardware error -1166=Invisible track present -1167=Incomplete track present (maybe a CD-RFS-CD?) -1168=Unknown track present [AUDIOGEN] 0 =No error 1 =User aborted 2 =File missing 3 =File hat a wrong format -1 =Unspecified Audiogenerator Error -2 =Could not perform StartDisk -3 =Could not perform StartSession -4 =Could not perform StartTrack -5 =Could not perform Write -6 =Could not perform EndTrack -7 =Could not perform EndSession -8 =Could not perform EndDisk -9 =Could not generate DAO information -10 =Error preparing audio track [IMAGEGEN] 0 =No error 1 =User aborted 2 =File missing 3 =File hat a wrong format -1 =Unspecified Imagegenerator Error -2 =Could not perform StartDisk -3 =Could not perform StartSession -4 =Could not perform StartTrack -5 =Could not perform Write -6 =Could not perform EndTrack -7 =Could not perform EndSession -8 =Could not perform EndDisk -9 =Error during ISO relocation -10 =The image chunks: -11 =Error during generation of DAO information -12 =Cannot write track at correct position with this recorder [ISO9660GEN] -3 =Joliet names of these files (listed here in ISO-L3) are equal: -4 =The ISO9660 Generator ran out of memory -5 =The following fixed file has an illegal position -6 =Prepartion of ISO9660 structures failed -7 =Too many files in one group of interleaved files -8 =IO error using the boot image -9 =Cannot allocate space on the CD-R -10 =Boot sector not recognized [MAKEJOLIETNAMES] -3 =The listed files have no unique Joliet name: [PHASE] 20 =Start of read CD 21 =Read CD done 22 =Read CD failed 23 =Read CD aborted 24 =Start of caching files 25 =Caching files completed 26 =Caching of files failed 27 =Caching of files aborted 28 =Start of speed measurement 29 =Speed measurement done: %dx (%d KB/s) 30 =Speed measurement failed 31 =Speed measurement aborted 32 =Start of simulation at %dx (%d KB/s) 33 =Simulation done successfully at %dx (%d KB/s) 34 =Simulation failed at %dx (%d KB/s) 35 =Simulation aborted 36 =Start of burnprocess at %dx (%d KB/s) 37 =Burnprocess done successfully at %dx (%d KB/s) 38 =Burnprocess failed at %dx (%d KB/s) 39 =Burnprocess aborted 40 =User aborted 41 =Compilation will not fit onto a blank CD 42 =Writing Lead In 43 =Writing Lead Out 44 =Writing Lead In and Lead Out 45 =Start generating CD identification 46 =Finished generation of CD identification 47 =Generating relocation information 48 =Analyzing CD 49 =Read track info 50 =Read media catalog number 51 =Read ISRC 52 =Find end of track 54 =Copy CD 55 =Finishing 56 =Unspecified Error. Burnprocess failed 57 =DAO Oversize burning option activated 59 =Writing harddisk backup track 60 =Finishing 61 =Start of simulation 62 =Simulation done successfully 63 =Simulation failed 64 =Simulation aborted 65 =Start of burnprocess 66 =Burnprocess done successfully 67 =Burnprocess failed 68 =Burnprocess aborted 69 =Index scanning 70 =Only simulation of first session possible 71 =Write several sessions at once; result unreadable in some drives 72 =BURN-Proof activated 73 =Preparing items 74 =Checking discs 75 =JustLink activated 76 =Change of write speed due to media 77 =Write tracks 78 =Verify compilation 79 =Verify aborted 80 =Verify compilation done successfully 81 =Verify compilation failed 82 =Encoding video 83 =Start checking for virus infected files 84 =End of virus checking phase 85 =End of virus checking. A virus was found and burning has to be aborted! 86 =CD-Text not supported 87 =Seamless Link activated 88 =ExacLink activated 89 =Super Link activated 90 =Buffer underrun protection activated 91 =poor performance on your DMA-chipset-driver (look for updates) 92 =recording quality may be affected not using JustSpeed option 93 =Not possible to write at this speed. Please select a slower speed and try again [CDCOPY] 1 =User aborted -1 =CD is copyrighted -2 =Copy for this cd is not supported -3 =Error writing image file -4 =Not enough memory -5 =The CD will not fit onto a blank CD -6 =Not enough space to copy this CD -7 =Not enough space to save this wave file -8 =Invalid track info -9 =Invalid track mode -10 =Warning: Unknown data format at -11 =Warning: EDC, ECC Error at -12 =Unrecoverable read error at -13 =Illegal select for audio track -14 =Analyzing CD failed -15 =This drive doesn't support audio extraction -20 =Error: wrong item type (1) -21 =Error in StartDisk -22 =Error in EndDisk -23 =Error in StartSession -24 =Error in EndSession -25 =Error in Write -26 =Not enough memory -28 =Error building copy item -29 =Error: wrong item type (2) -30 =Cannot write track at correct position with this recorder [CDCOPYDOC] 1 =User aborted -1 =Create image failed -2 =Error in open image file -3 =Error writing image file -4 =Error in close image file -5 =The image file is invalid -6 =The format on the source CD isn't supported -7 =This drive does not support audio extraction [MMC] 0000=No additional sense information 0006=I/O process terminated 0011=Audio play in progress 0017=Cleaning requested 0200=No seek complete 0400=Logical unit not ready, cause not reportable 0401=Logical unit in process of becoming ready 0402=Logical unit not ready, initialization command required 0403=Logical unit not ready, manual intervention required 0404=Logical unit not ready, format in progress 0407=Logical unit not ready, operation in progress 0408=Logical unit not ready, long write in progress 0500=Logical unit does not respond to selection 0600=No reference position found 0700=Multiple peripherial devices selected 0800=Logical unit communication failure 0801=Logical unit communication time-out 0802=Logical unit communication parity error 0900=Track following error 0901=Tracking servo failure 0902=Focus servo failure 0903=Spindle servo failure 0904=Head select fault 0a00=Error log overflow 0b00=Warning 0b01=Warning, specified temperaturee exceeded 0b02=Warning, enclosure degraded 0c00=Write error 0c07=Write error, recovery needed 0c08=Write error, recovery failed 0c09=Write error, loss of streaming 0c0a=Write error, padding blocks added 1000=Invalid block size for command 1001=Packet does not fit into available space 1002=Buffer underrun 1100=Unrecovered read error 1101=Read retries exhausted 1102=Error too long to correct 1105=L-EC uncorrectable error 1106=CIRC unrecovered error 110f=Error reading UPC/EAN number 1110=Error reading ISRC number 1111=Read error, loss of streaming 1500=Random positioning error 1501=Mechanical positioning error 1502=Positioning error detected by read of medium 1700=Recovered data with no error correction applied 1701=Recovered data with retries 1702=Recovered data with positive head offset 1703=Recovered data with negative head offset 1704=Recovered data with retries and/or CIRC applied 1705=Recovered data using previous secotr id 1707=Recovered data without ECC - recommend reassignment 1708=Recovered data without ECC - recommend rewrite 1709=Recovered data without ECC - data rewritten 1800=Recovered data with error correction applied 1801=Recovered data with error correction & retries applied 1802=Recovered data - data auto-reallocated 1803=Recovered data with CIRC 1804=Recovered data with L-EC 1805=Recoverred data - recommen reassignment 1806=Recoverred data - recommend rewrite 1a00=Parameter list length error 1b00=Synchronous data transfer error 1d00=Miscompare during verify operation 2000=Invalid command operation code 2100=Logical block out of range 2101=Invalid element address 2102=Invalid address for write 2200=Illegal function 2400=Invalid field in CDB 2500=Logical unit not supported 2600=Invalid field in parameter list 2601=Parameter not supported 2602=Parameter value invalid 2603=Threshold parameters not supported 2604=Invalid release of active persistent reservation 2700=Write protected 2701=Hardware write protected 2702=Logical unit software write protected 2703=Associated write protect 2704=Persistent write protect 2705=Permanent write protect 2800=Not ready to ready change, medium may have changed 2801=Import or export element accessed 2900=Power on, reset or bus device reset occurred 2901=Power on occurred 2902=SCSI bus reset occurred 2903=Bus device reset funtion occurred 2904=Device internal reset 2a00=Parameters changed 2a01=Mode parameters changed 2a02=Log parameters changed 2a03=Reservations preempted 2b00=Copy cannot execute since host cannot disconnect 2c00=Command sequence error 2c03=Current program area is not empty 2c04=Current program area is empty 2c05=Persistent prevent conflict 2e00=Insufficient time for operation 2f00=Commands cleared by another initator 3000=Incompatible medium installed 3001=Cannot read medium - unknown format 3002=Cannot read medium - incompatible format 3003=Cleaning cartridge installed 3004=Cannot write medium - unknown format 3005=Cannot write medium - incompatible format 3006=Cannot format medium - incompatible medium 3007=Cleaning failure 3008=Cannot write - application code mismatch 3009=Current session not fixated for append 3100=Medium format corrupted 3101=Format command failed 3400=Enclosure failure 3500=Enclosure services failure 3501=Unsupported enclosure failure 3502=Enclosure services unavailable 3503=Enclosure services transfer failure 3504=Enclosure services transfer refused 3700=Rounded parameter 3900=Saving parameters not supported 3a00=Medium not present 3a01=Medium not present - tray closed 3a02=Medium not present - tray open 3b0d=Medium destination element full 3b0e=Medium source element empty 3b0f=End of medium reached 3b11=Medium magazine not accessible 3b12=Medium magazine removed 3b13=Medium magazine inserted 3b14=Medium magazine locked 3b15=Medium magazine unlocked 3d00=Invalid bits in identify message 3e00=Logical unit has not self-configured yet 3e01=Logical unit failure 3e02=Timeout on logical unit 3f00=Target operating conditions have changed 3f01=Microcode has been changed 3f02=Changed operating definition 3f03=Inquiry data has changed 4000=Diagnostic failure on component 4300=Message error 4400=Internal target failure 4500=Select or reselect failure 4600=Unsuccessful soft reset 4700=SCSI parity error 4800=Initiator detected error message received 4900=Invalid message error 4a00=Command phase error 4b00=Data phase error 4c00=Logical unit failed self-configuration 4d00=Tagged overlapped commands 4e00=Overlapped commands attempted 5100=Erase failure 5300=Media load or eject failed 5302=Medium removal prevented 5380=Eject button is pressed in prevent condition 5700=Unable to recover table of contents 5a00=Operator request or state change input 5a01=Operator medium removal request 5a02=Operator selected write protect 5a03=Operator selected write permit 5b00=Log exception 5b01=Threshold condition met 5b02=Log counter at maximum 5b03=Log list codes exhausted 5d00=Failure prediction threshold exceeded 5dff=Failure prediction threshold exceeded (FALSE) 5e00=Low power condition on 5e01=Idle condition activated by timer 5e02=Standby condition activated by timer 5e03=Idle condition activated by command 5e04=Standby condition activated by command 6000=Lamp failure 6100=Video acquisition error 6101=Unable to acquire video 6102=Out of focus 6300=End of user area encountered on this track 6301=Packet does not fit in available space 6400=Illegal mode for this track 6401=Invalid packet size 64C0=Illegal speed for this medium 6500=Voltage fault 7200=Session fixation error 7201=Session fixation error writing lead-in 7202=Session fixation error writing lead-out 7203=Session fixation error - incomplete track in session 7204=Empty or partially written reserved track 7300=CD control error 7301=Power calibration area almost full 7302=Power calibration area is full 7303=Power calibration area error 7304=Program memory area update failure 7305=Program memory area is full 7306=RMA/PMA is almost full 8900=Inappropriate command 9082=Read Write Control Task Error 9141=Mechanism Control Task Error 91A1=Mechanism Control Task Error C100=Illegal track status C200=Reserved track present C400=Illegal reserve length for reserve track command C500=Buffer underrun C601=Unwritten area encountered C602=Link blocks encountered CC00=Not enough space CD00=No track present to close session CE00=Unrecordable track descriptor encountered CF00=Damaged track present D000=PMA area full D100=PCA area full D400=Exit from pseudo track at once recording [MP6200] 0000=No additional sense information 0006=I/O process terminated 0011=Audio play in progress 0012=Audio play paused 0100=Recovery needed 0101=Recovery failed 0200=No seek complete 0400=Logical unit not ready, cause not reportable 0401=Logical unit in process of becoming ready 0402=Logical unit not ready, initialization command required 0403=Logical unit not ready, manual intervention required 0601=Power calibration area almost full 0800=Logical unit communication failure 0900=Track following error 0901=Tracking servo failure 0902=Focus servo failure 0903=Spindle servo failure 0980=Radial skating error 0981=Sledge servo failure 0982=PLL no lock 0983=Servo off track 0984=ATIP sync error 0985=ATIP/subcode jumped error 0c00=Write error 1000=Invalid block size for command 1001=Packet does not fit into available space 1002=Buffer underrun 1003=Disc is not empty 1004=Current program area is empty 1005=Current program area is not empty 1100=Unrecovered read error 1200=Invalid UPC/EAN number 1201=Error reading UPC/EAN number 1202=Invalid ISRC number 1500=Random positioning error 1700=Recovered data with no error correction applied 1701=Recovered data with retries 1800=Recovered data with error correction applied 1801=Recovered data with error correction & retries applied 1a00=Parameter list length error 2000=Invalid command parameter list 2100=Logical block out of range 2400=Invalid field in CDB 2500=Logical unit not supported 2600=Invalid field in parameter list 2601=Parameter not supported 2602=Parameter value invalid 2700=Write protected 2800=Not ready to ready change, medium changed 2900=Power on, reset or bus device reset occurred 2a00=Parameters changed 2a01=Mode parameters changed 2a02=Padding blocks added 2c00=Command sequence error 2f00=Commands cleared by another initator 3000=Incompatible medium installed 3001=Cannot read medium - unknown format 3002=Cannot read medium - incompatible format 3004=Cannot write medium - unknown format 3005=Cannot write medium - incompatible format 3100=Medium format corrupted 3101=Format command failed 3900=Saving parameters not supported 3a00=Medium not present 3f00=Target operating conditions have changed 3f01=Microcode has been changed 3f03=Inquiry data has changed 4000=Diagnostic failure on component 4400=Internal target failure 4500=Select or reselect failure 4700=SCSI parity error 4800=Initiator detected error message received 4900=Invalid message error 4e00=Overlapped commands attempted 5000=Write append error 5300=Media load or eject failed 5302=Medium removal prevented 5380=Eject button is pressed in prevent condition 5700=Unable to recover table of contents 57c0=Subcode not found 57c1=ATIP not found 57c2=No ATIP or subcode 57c3=PMA error 57c4=TOC read error 57c5=Disc information error 5a00=Operator request or state change input 5a01=Operator medium removal request 6300=End of user area encountered on this track 6400=Illegal mode for this track 6480=Read in lead-in 6481=Read in lead-out 64C0=Illegal speed for this medium 7100=Session fixation error 7101=Session fixation error while writing lead-in 7102=Session fixation error while writing lead-out 7103=Session fixation error - incomplete track in session 7104=Session fixation error - empty or partially written track 7105=Cannot write session at once, no cue sheet 8200=Command now not valid 9000=Reserve track check error 9082=Read Write Control Task Error 9141=Mechanism Control Task Error 91A1=Mechanism Control Task Error 9200=Header search error 9801=Header monitor error 9802=EDC error 9803=Read link, run-in or run-out 9804=Last one block error 9805=Illegal block size 9806=Not all data transferred 9807=CDBD overrun error a100=Invalild start address a500=Application code mismatch aa00=End of medium reached c101=Invalid track number c280=Syscon ROM error c281=Syscon RAM error c290=EFM encoder error c291=EFM decoder error c292=DAC error c295=Syscon EEPROM error c2a0=Block decoder communication error c2a1=Block encoder communication error c2a2=Block encoder/decoder path error c300=CD-R engine selftest error c400=Buffer parity error c500=Data transfer error c601=Unwritten area encounterred c900=Illegal block length ca00=Power calibration error ca80=Power range error ca81=Modulation error ca82=Beta upper range error ca83=Beta lower ranger error ca84=Alpha upper range error ca85=Alpha lower range error cd00=No track present to complete d000=PMA area is full d001=PMA update failed d102=Power calibration area is full e000=12V failure e100=Undefined syscon error e101=Syscon communication error e102=Unknonw syscon error e200=Syscon not ready e300=Command rejected e400=Command not accepted e500=Verify erro at the beginning of track e501=Verify error at the ending of track e502=Verify error at the beginning of lead-in e503=Verify error at the ending of lead-in e504=Verify error at the beginning of lead-out e505=Verify error at the ending of lead-out ff00=Command phase timeout error ff01=Data in phase timeout error ff02=Data out phase timeout error ff03=Status phase timeout error ff04=Message in phase timeout error ff05=Message out phase timeout errorDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.