OEMSETUP.INF Driver File Contents (3c980b-tx.zip)

;*************************************************
;
; %VER  3Com Fast EtherLink XL Server(3c980) driver OEMSETUP INF File 1.0.5
;
;*************************************************

[IntstallOptions]
 Install_dRMON = "NO"
 Install_3NIC_Diag = "YES"
 Install_PACE = "NO"
 Install_Shortcuts = "YES"

[Identification]
 OptionType = NetAdapter

[PlatformsSupported]
 ISA
 EISA
 "Jazz-Internal Bus"
 PCI

[Options]
3C980 
3C905 
3C900 

[DriverFilenameConstantsNDIS3]
 NetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\el980n3.sys"
 ProductSoftwareImagePath = "%SystemRoot%\System32\drivers\el980n3.sys"
 ProductSoftwareUpgradePath = "\SystemRoot\System32\drivers\el980n3.sys"

[DriverFilenameConstantsNDIS4]
 NetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\el980n4.sys"
 ProductSoftwareImagePath = "%SystemRoot%\System32\drivers\el980n4.sys"
 ProductSoftwareUpgradePath = "\SystemRoot\System32\drivers\el980n4.sys"


[FileConstants]
 UtilityInf = "UTILITY.INF"
 subroutineinf = "SUBROUTN.INF"
 SoftwareType = "driver"
 Exit_Code = 0
 IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
 TrayIconExe = "comsmd.exe"
 NetworkCardsKey = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"
 
Manufacturer = "3Com"
 ProductMajorVersion = "1"
 ProductMinorVersion = "0"
 ProductReview = "1"
 ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
 ProductSoftwareName = "El980"
 NetRuleSoftwareType = "El980Sys ndisDriver El980Driver"
 NetRuleSoftwareUse = $(SoftwareType)
 NetRuleSoftwareBindForm = """El980Sys"" yes no container"
 NetRuleSoftwareClass = {"El980Driver basic"}
 NetRuleSoftwareBindable = {"El980Driver El980Adapter non exclusive 100"}
 ProductHardwareName = "El980"
 NetRuleHardwareBindForm = " yes yes container"

 ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
 ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"

 FunctionTitle = "3Com 3C980 Adapter Card Setup"
 ProductSoftwareDescription = "3Com 3C980 Adapter Driver"
 ProductSoftwareTitle = "3Com 3C980 Adapter Driver"
 3CNUMBER = "3C980"
 
GROUP_NAME = "3Com Fast Etherlink XL/Etherlink XL"
 NetRuleHardwareType = "El980 El980Adapter"
 NetRuleHardwareClass = {"El980Adapter basic"}

 ProductHardwareXXXXXTitle = "3Com Fast EtherLink/Etherlink XL PCI Busmaster NIC"
 ProductHardwareXXXXXDescription = "3Com Fast EtherLink/Etherlink XL PCI Busmaster NIC"

 ProductHardware36944Title = "3Com Fast EtherLink XL NIC (3C905-TX)"
 ProductHardware36944Description = "3Com Fast EtherLink XL 10/100Mb TX Ethernet NIC (3C905-TX)"

 ProductHardware36945Title = "3Com Fast EtherLink XL NIC (3C905-T4)"
 ProductHardware36945Description = "3Com Fast EtherLink XL 10/100Mb T4 Ethernet NIC (3C905-T4)"

 ProductHardware36949Title = "3Com Fast EtherLink XL NIC (3C905B-TX)"
 ProductHardware36949Description = "3Com Fast EtherLink XL 10/100Mb TX Ethernet NIC (3C905B-TX)"

 ProductHardware36954Title = "3Com Fast EtherLink XL NIC (3C905B-FX)"
 ProductHardware36954Description = "3Com Fast EtherLink XL 100Mb FX Ethernet NIC (3C905B-FX)"

 ProductHardware36864Title = "3Com EtherLink XL NIC (3C900-TPO)"
 ProductHardware36864Description = "3Com EtherLink XL TPO 10Mb Ethernet NIC (3C900-TPO)" 

ProductHardware36865Title = "3Com EtherLink XL NIC (3C900-COMBO)"
 ProductHardware36865Description = "3Com EtherLink XL COMBO 10Mb Ethernet NIC (3C900-COMBO)" 

ProductHardware36868Title = "3Com EtherLink XL NIC (3C900B-TPO)"
 ProductHardware36868Description = "3Com EtherLink XL TPO 10Mb Ethernet NIC (3C900B-TPO)" 

ProductHardware36869Title = "3Com EtherLink XL NIC (3C900B-COMBO)"
 ProductHardware36869Description = "3Com EtherLink XL COMBO 10Mb Ethernet NIC (3C900B-COMBO)" 

ProductHardware36870Title = "3Com EtherLink XL NIC (3C900B-TPC)"
 ProductHardware36870Description = "3Com EtherLink XL TPC 10Mb Ethernet NIC (3C900B-TPC)" 

ProductHardware36874Title = "3Com EtherLink XL NIC (3C900B-FL)"
 ProductHardware36874Description = "3Com EtherLink XL FL 10Mb Ethernet NIC (3C900B-FL)" 

ProductHardware38912Title   = "3Com Fast EtherLink Server Adapter"
ProductHardware38912Description = "3Com Fast EtherLink Server PCI Adapter "

AdapterType = 5 
CFIDList = {38912}
 

[GeneralConstants]
 from = ""
 to = ""
 ExitCodeOk = 0
 ExitCodeCancel = 1 
ExitCodeFatal = 2
 KeyNull = ""
 MAXIMUM_ALLOWED = 33554432
 RegistryErrorIndex = NO_ERROR
 KeyProduct = ""
 KeyParameters = ""
 TRUE = 1
 FALSE = 0
 NoTitle = 0
 ExitState = "Active"
 OldVersionExisted = $(FALSE)
 DriverPath = $(!STF_NTPATH)\drivers
 NT350VersionConstant = "3.50"
 NT310VersionConstant = "3.10"
 NT400VersionConstant = "(4.0)"
 INF_PROCESSER = "I386"
[date]
 Now = {} ? $(!LIBHANDLE) GetSystemDate

[Identify]
 read-syms Identification
 set Status = STATUS_SUCCESSFUL
 set Identifier = $(OptionType)
 set Media = #("Source Media Descriptions", 1, 1)
 Return $(Status) $(Identifier) $(Media)

[ReturnOptions]
 set Status = STATUS_FAILED
 set OptionList = {}
 set OptionTextList = {}
 set LanguageList = ^(LanguagesSupported, 1)
 Ifcontains(i) $($0) in $(LanguageList)
 ifstr(i) $($1) == ""
 goto returnoptions
 endif
 set PlatformList = ^(PlatformsSupported, 1)
 Ifcontains(i) $($1) in $(PlatformList)
 goto returnoptions
 else
 set Status = STATUS_NOTSUPPORTED
 goto finish_ReturnOptions
 endif
 else
 set Status = STATUS_NOLANGUAGE
 goto finish_ReturnOptions
 endif

returnoptions = +
 set OptionList = ^(Options, 1)
 set OptionTextList = ^(OptionsText$($0), 1)
 set Status = STATUS_SUCCESSFUL

finish_ReturnOptions = +
 Return $(Status) $(OptionList) $(OptionTextList)

[PaceRegistry]
 read-syms GeneralConstants
 read-syms FileConstants
 read-syms DialogConstants$(!STF_LANGUAGE)
 read-syms FileConstants$(!STF_LANGUAGE)


 OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\"$(ProductSoftwareName) $(!REG_KEY_ALL_ACCESS) KeyNt
 
set TrayIconList = {PACENAME,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)}
 SetRegValue $(KeyNt) $(TrayIconList)
 
CloseRegKey $(KeyNt) 

OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE" $(!REG_KEY_WRITE) SOFTPACEKEY
 
OpenRegKey $(SOFTPACEKEY) "" "3Com" $(!REG_KEY_WRITE) COMPACEKEY
 ifstr $(COMPACEKEY) == ""
 CreateRegKey $(SOFTPACEKEY) {"3Com", 0, GenericClass} "" $(!REG_KEY_WRITE) "" COMPACEKEY
 endif
 
OpenRegKey $(COMPACEKEY) "" "DA" $(!REG_KEY_WRITE) DAPACEKEY
 ifstr $(DAPACEKEY) == ""
 CreateRegKey $(COMPACEKEY) {"DA", 0, GenericClass} "" $(!REG_KEY_WRITE) "" DAPACEKEY
 endif

 OpenRegKey $(DAPACEKEY) "" "CardsSupported" $(!REG_KEY_WRITE) CARDPACEKEY
 ifstr $(CARDPACEKEY) == ""
 CreateRegKey $(DAPACEKEY) {"CardsSupported", 0, GenericClass} "" $(!REG_KEY_WRITE) "" CARDPACEKEY
 endif

 OpenRegKey $(CARDPACEKEY) "" "EL980" $(!REG_KEY_WRITE) EL980PACEKEY
 ifstr $(EL980PACEKEY) == ""
 CreateRegKey $(CARDPACEKEY) {"EL980", 0, GenericClass} "" $(!REG_KEY_WRITE) "" EL980PACEKEY
 endif
 
SetRegValue $(EL980PACEKEY) {"CardName", 0, $(!REG_VT_SZ), $(GROUP_NAME)}
 SetRegValue $(EL980PACEKEY) {"Pace", 0, $(!REG_VT_SZ), "1"}
 SetRegValue $(EL980PACEKEY) {"FastIP", 0, $(!REG_VT_SZ), "1"}
 
OpenRegKey $(DAPACEKEY) "" "Pace" $(!REG_KEY_WRITE) PACEPACEKEY
 ifstr $(PACEPACEKEY) == ""
 CreateRegKey $(DAPACEKEY) {"Pace", 0, GenericClass} "" $(!REG_KEY_WRITE) "" PACEPACEKEY
 endif

 OpenRegKey $(PACEPACEKEY) "" "Applications" $(!REG_KEY_WRITE) APPPACEKEY
 ifstr $(APPPACEKEY) == ""
 CreateRegKey $(PACEPACEKEY) {"Applications", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPPACEKEY
 endif

 OpenRegKey $(APPPACEKEY) "" "Emotion CreativePartner (IPX)" $(!REG_KEY_WRITE) APPSPECPACEKEY
 ifstr $(APPSPECPACEKEY) == ""
 CreateRegKey $(APPPACEKEY) {"Emotion CreativePartner (IPX)", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
 endif
 set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"IPX"},+
 {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
 {RangeStart,$(NoTitle),$(!REG_VT_SZ),"87C7"}, +
 {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"87C8"}}
 Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 CloseRegKey $(APPSPECPACEKEY)
 

OpenRegKey $(APPPACEKEY) "" "Emotion CreativePartner (TCP/IP)" $(!REG_KEY_WRITE) APPSPECPACEKEY
 ifstr $(APPSPECPACEKEY) == ""
 CreateRegKey $(APPPACEKEY) {"Emotion CreativePartner (TCP/IP)", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
 endif
 set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
 {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
 {RangeStart,$(NoTitle),$(!REG_VT_SZ),"0453"}, +
 {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"0455"}}
 Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 CloseRegKey $(APPSPECPACEKEY)

 OpenRegKey $(APPPACEKEY) "" "InSoft Communique!" $(!REG_KEY_WRITE) APPSPECPACEKEY
 ifstr $(APPSPECPACEKEY) == ""
 CreateRegKey $(APPPACEKEY) {"InSoft Communique!", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
 endif
 set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
 {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
 {RangeStart,$(NoTitle),$(!REG_VT_SZ),"1025, 1500"}, +
 {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"1050, 1525"}}
 Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 CloseRegKey $(APPSPECPACEKEY)

 OpenRegKey $(APPPACEKEY) "" "Picturetel LiveLAN (over IPX)" $(!REG_KEY_WRITE) APPSPECPACEKEY
 ifstr $(APPSPECPACEKEY) == ""
 CreateRegKey $(APPPACEKEY) {"Picturetel LiveLAN (over IPX)", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
 endif
 set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"IPX"},+
 {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
 {RangeStart,$(NoTitle),$(!REG_VT_SZ),"4050"}, +
 {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"4082"}}
 Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 CloseRegKey $(APPSPECPACEKEY)

 OpenRegKey $(APPPACEKEY) "" "Picturetel LiveLAN (over TCP/IP)" $(!REG_KEY_WRITE) APPSPECPACEKEY
 ifstr $(APPSPECPACEKEY) == ""
 CreateRegKey $(APPPACEKEY) {"Picturetel LiveLAN (over TCP/IP)", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
 endif
 set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
 {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
 {RangeStart,$(NoTitle),$(!REG_VT_SZ),"06a4"}, +
 {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"06d6"}}
 Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 CloseRegKey $(APPSPECPACEKEY)

 OpenRegKey $(APPPACEKEY) "" "Precept FlashWare" $(!REG_KEY_WRITE) APPSPECPACEKEY
 ifstr $(APPSPECPACEKEY) == ""
 CreateRegKey $(APPPACEKEY) {"Precept FlashWare", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
 endif
 set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
 {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
 {RangeStart,$(NoTitle),$(!REG_VT_SZ),"8000, C000"}, +
 {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"8000, C000"}}
 Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 CloseRegKey $(APPSPECPACEKEY)

 OpenRegKey $(APPPACEKEY) "" "Progressive Networks RealAudio" $(!REG_KEY_WRITE) APPSPECPACEKEY
 ifstr $(APPSPECPACEKEY) == ""
 CreateRegKey $(APPPACEKEY) {"Progressive Networks RealAudio", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
 endif
 set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
 {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
 {RangeStart,$(NoTitle),$(!REG_VT_SZ),"6970"}, +
 {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"7170"}}
 Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 CloseRegKey $(APPSPECPACEKEY)

 OpenRegKey $(APPPACEKEY) "" "Starlight Networks StarCast" $(!REG_KEY_WRITE) APPSPECPACEKEY
 ifstr $(APPSPECPACEKEY) == ""
 CreateRegKey $(APPPACEKEY) {"Starlight Networks StarCast", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
 endif
 set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
 {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
 {RangeStart,$(NoTitle),$(!REG_VT_SZ),"1911"}, +
 {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"1911"}}
 Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 CloseRegKey $(APPSPECPACEKEY)

 OpenRegKey $(APPPACEKEY) "" "VCON Cruiser 100" $(!REG_KEY_WRITE) APPSPECPACEKEY
 ifstr $(APPSPECPACEKEY) == ""
 CreateRegKey $(APPPACEKEY) {"VCON Cruiser 100", 0, GenericClss} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
 endif
 set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
 {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
 {RangeStart,$(NoTitle),$(!REG_VT_SZ),"1500, 1600"}, +
 {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"1500, 1600"}}
 Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 CloseRegKey $(APPSPECPACEKEY)

 OpenRegKey $(APPPACEKEY) "" "VXtreme Web Theater" $(!REG_KEY_WRITE) APPSPECPACEKEY
 ifstr $(APPSPECPACEKEY) == ""
 CreateRegKey $(APPPACEKEY) {"VXtreme Web Theater", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
 endif
 set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
 {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
 {RangeStart,$(NoTitle),$(!REG_VT_SZ),"7000"}, +
 {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"7020"}}
 Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 CloseRegKey $(APPSPECPACEKEY)

 OpenRegKey $(APPPACEKEY) "" "Xing Technology Streamworks" $(!REG_KEY_WRITE) APPSPECPACEKEY
 ifstr $(APPSPECPACEKEY) == ""
 CreateRegKey $(APPPACEKEY) {"Xing Technology Streamworks", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
 endif
 set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
 {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
 {RangeStart,$(NoTitle),$(!REG_VT_SZ),"1558"}, +
 {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"1558"}}
 Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 CloseRegKey $(APPSPECPACEKEY)

 OpenRegKey $(APPPACEKEY) "" "Vosaic Software Server" $(!REG_KEY_WRITE) APPSPECPACEKEY
 ifstr $(APPSPECPACEKEY) == ""
 CreateRegKey $(APPPACEKEY) {"Vosaic Software Server", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
 endif
 set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"TCP"},+
 {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
 {RangeStart,$(NoTitle),$(!REG_VT_SZ),"04D3"}, +
 {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"04D3"}}
 Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 CloseRegKey $(APPSPECPACEKEY)

 OpenRegKey $(APPPACEKEY) "" "Vosaic Software Client" $(!REG_KEY_WRITE) APPSPECPACEKEY
 ifstr $(APPSPECPACEKEY) == ""
 CreateRegKey $(APPPACEKEY) {"Vosaic Software Client", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
 endif
 set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
 {Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
 {RangeStart,$(NoTitle),$(!REG_VT_SZ),"F169"}, +
 {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"F17D"}}
 Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 CloseRegKey $(APPSPECPACEKEY)

 CloseRegKey $(APPPACEKEY)
 CloseRegKey $(PACEPACEKEY)
 CloseRegKey $(EL980PACEKEY)
 CloseRegKey $(CARDPACEKEY)
 CloseRegKey $(DAPACEKEY)
 CloseRegKey $(COMPACEKEY)
 CloseRegKey $(SOFTPACEKEY)

return 


[InstallOption]
 



set CurrLang = $($0)
 set Option = $($1)
 set SrcDir = $($2)
 set AddCopy = $($3)
 set DoCopy = $($4)
 set DoConfig = $($5)
 set LanguageList = ^(LanguagesSupported, 1)
 Ifcontains(i) $($0) NOT-IN $(LanguageList)
 Return STATUS_NOLANGUAGE
 endif
 set-subst LF = "\n"
 read-syms IntstallOptions
 read-syms GeneralConstants
 read-syms FileConstants
 read-syms DialogConstants$(!STF_LANGUAGE)
 ifstr(i) $(!NTN_Origination) == "NCPA"
 set Continue = "OK"
 endif
 read-syms FileConstants$(!STF_LANGUAGE)
 detect date
 set-title $(FunctionTitle)
 set to = Begin
 set from = Begin
 set CommonStatus = STATUS_SUCCESSFUL
 EndWait

Begin = +
 




set CurrentVersionValue = ""
 OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows Nt\CurrentVersion" $(!REG_KEY_READ) KeyNt
 Ifstr(i) $(KeyNt) != ""
 GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue
 Debug-Output "$(InfFile) : WinNT CurrentVersion ="$(CurrentVersionValue)
 CloseRegKey $(KeyNt)
 Endif
 

ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
 set NDIS_VER = NDIS4
 else
 set NDIS_VER = NDIS3 
endif

ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) 
set Error = "Only Windows NT v3.51 is supported by this product"
goto fatal
endif 
 
read-syms DriverFilenameConstants$(NDIS_VER)

 ifstr(i) (*($(CurrentVersionValue),4)) == $(NT310VersionConstant) 
Debug-Output "$(InfFile) : Configureadapter"
 set Error = "Windows NT v3.10 is not support by this product"
 goto fatal
 endif
 
Ifstr(i) $(!NTN_InstallMode) == deinstall
 set StartLabel = removeadapter
 else-Ifstr(i) $(!NTN_InstallMode) == Update
 set StartLabel = UpgradeSoftware
 else-Ifstr(i) $(!NTN_InstallMode) == bind
 set StartLabel = bindingadapter
 else-Ifstr(i) $(!NTN_InstallMode) == configure
 ifstr $(!STF_PLATFORM) == $(INF_PROCESSER) 
RunProgram ExitCode "Windows Directory" "" 3nicdiag.exe 
set CommonStatus = STATUS_USERCANCEL
 goto end
 else-Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
 Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 set Error = $($R0)
 set from = end
 set to = end
 goto nonfatalinfo
 else
 set StartLabel = configureadapter
 endif
 else
 set StartLabel = installadapter
 set OEM_ABANDON_OPTIONS = {}
 set OEM_ABANDON_SOFTWARE = FALSE
 set OEM_ABANDON_ON = TRUE
 endif

 Debug-Output "$(InfFile) : =================================================="
 Debug-Output "$(InfFile) : STF_CWDIR is: "$(!STF_CWDIR)
 Debug-Output "$(InfFile) : STF_SRCDIR is: "$(!STF_SRCDIR)
 Debug-Output "$(InfFile) : STF_LANGUAGE is: "$(!STF_LANGUAGE)
 Debug-Output "$(InfFile) : Option is: "$(Option)
 Debug-Output "$(InfFile) : !STF_NCN_InstallMode is:"$(!NTN_InstallMode)
 Debug-Output "$(InfFile) : !STF_NCDETECT is: "$(!STF_NCDETECT)
 Debug-Output "$(InfFile) : !STF_NCOPTION is: "$(!STF_NCOPTION)
 Debug-Output "$(InfFile) : !STF_NCDETCARD is: "$(!STF_NCDETCARD)
 Debug-Output "$(InfFile) : !STF_NCDETINFO is: "$(!STF_NCDETINFO)
 Debug-Output "$(InfFile) : !STF_GUI_UNATTENDED is: "$(!STF_GUI_UNATTENDED)
 Debug-Output "$(InfFile) : !STF_BusType is $(!STF_BUSTYPE)" 
Debug-Output "$(InfFile) : !STF_BusTypeList is $(!STF_BUSTYPELIST)" 
Debug-Output "$(InfFile) : =================================================="

 set from = $(fatal)
 set to = $(fatal)
 goto $(StartLabel)

installadapter = +
 
Debug-Output "$(InfFile) : Installadapter" 
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(!REG_KEY_READ) KeyProduct
 Ifstr $(KeyProduct) != $(KeyNull)
 CloseRegKey $(KeyProduct)
 ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 Debug-Output "ShellCode error: cannot get an error string."
 goto ShellCodeError
 endif
 goto end
 else
 set OldVersionExisted = $(TRUE)
 endif
 Endif

 Goto adapteroptions 

configureadapter = +
 Debug-Output "$(InfFile) : Configureadapter"

 set Error = "Cannot configure the software component"
 goto fatal

adapteroptions = +
 Debug-Output "$(InfFile) : Adapteroptions"
 set from = adapteroptions
 ifstr(i) $(!NTN_InstallMode) == configure
 goto updateparameters
 endif

installproduct =+
 Debug-Output "$(InfFile) : installproduct"
 StartWait 
set AdapterList = $($R1)
 ifint $(OldVersionExisted) == $(FALSE)
 Ifstr(i) $(DoCopy) == "YES"
 Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 Goto ShellCodeError
 Else-Ifstr(i) $($R0) == STATUS_FAILED
 Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 set Error = $($R0)
 Goto fatal
 Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
 Goto successful
 Endif
 
Endif
 
 install "Install-Option"
 ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
 Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 set Error = $($R0)
 goto fatal
 endif
 
endif

 



OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ProductHardwareName) $(!REG_KEY_READ) KeyNt
 CloseRegKey $(KeyNt)

 Ifstr(i) $(KeyNt) == ""
 Debug-Output "$(InfFile) : AddSoftwareComponent"
 Debug-Output "$(InfFile) : --> $(Manufacturer)"
 Debug-Output "$(InfFile) : --> $(ProductSoftwareName)"
 Debug-Output "$(InfFile) : --> $(ProductSoftwareTitle)"
 Debug-Output "$(InfFile) : --> $(STF_CONTEXTINFNAME)"
 Debug-Output "$(InfFile) : --> $(ProductSoftwareImagePath)"
 Debug-Output "$(InfFile) : --> $(NetEventDLL)"

 Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
 $(ProductSoftwareName), +
 $(ProductSoftwareName), +
 $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
 $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
 $(NetEventDLL)
 
Set OEM_ABANDON_SOFTWARE = TRUE
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 set RegistryErrorIndex = $($R0)
 Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
 EndWait
 CloseRegKey $($R1)
 CloseRegKey $($R2)
 CloseRegKey $($R3)
 CloseRegKey $($R4)
 CloseRegKey $($R5)
 goto fatalregistry
 endif
 Set SoftProductKey = $($R1)
 Set SoftNetRuleKey = $($R2)
 Set SoftServiceKey = $($R3)
 Set SoftParameterKey = $($R4)
 Set SoftLinkageKey = $($R5)
 set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
 {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
 {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
 {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
 {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
 {Review,$(NoTitle),$(!REG_VT_DWORD),$(ProductReview)},+
 {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
 {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
 Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 set RegistryErrorIndex = $($R0)
 Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
 EndWait
 CloseRegKey $(SoftProductKey)
 CloseRegKey $(SoftNetRuleKey)
 CloseRegKey $(SoftServiceKey)
 CloseRegKey $(SoftParameterKey)
 CloseRegKey $(SoftLinkageKey)
 goto fatalregistry
 endif
 set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
 {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
 {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
 {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
 {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
 {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
 Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 set RegistryErrorIndex = $($R0)
 CloseRegKey $(SoftProductKey)
 CloseRegKey $(SoftNetRuleKey)
 CloseRegKey $(SoftServiceKey)
 CloseRegKey $(SoftParameterKey)
 CloseRegKey $(SoftLinkageKey)

 

set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
 {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
 {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
 {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
 {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
 {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
 Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 

Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
 EndWait
 goto fatalregistry
 endif
 endif 

Debug-Output "$(InfFile) : About to look for 3Com PCI Cards"
 






set TargetVersion = *($(CurrentVersionValue),4)
 Debug-Output "$(InfFile) : Current Version:"$(TargetVersion)

 ifstr $(TargetVersion) == $(NT350VersionConstant) 
Debug-Output "Running on WindowsNT 3.50"
 set Version350 = $(TRUE)
 else
 Debug-Output "Running on WindowsNT 3.51 or higher"
 set Version350 = $(FALSE)
 endif

 ifint $(Version350) == $(TRUE)
 Debug-Output "Running on WindowsNT v3.50, Not using PCI Detection!!!"
 ifstr $(!STF_GUI_UNATTENDED) == "YES"
 Debug-Output "$(InfFile) : Running in GUI unattended mode"
 ifstr(i) $(!AutoNetInterfaceType) != ""
 set BusInterfaceType = $(!AutoNetInterfaceType)
 else
 set BusInterfaceType = 5
 endif
 ifstr(i) $(!AutoNetBusNumber) != ""
 set BusNumber = $(!AutoNetBusNumber)
 else
 set BusNumber = 0
 endif
 set NTDetected = $(FALSE)
 set AdapterList = {{$(Option),0, XXXXX}} 
Debug-Output "$(InfFile) : BusInterfaceType = $(BusInterfaceType)"
 Debug-Output "$(InfFile) : BusNumber = $(BusNumber)"
 else 
Debug-Output "$(InfFile) : Running 3.50 Bus Dialog"
 set BusInterfaceType = 5
 set BusNumber = 0
 set NTDetected = $(FALSE)
 Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardwareXXXXXDescription) $(BusInterfaceType) $(BusNumber)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 Debug-Output "ShellCode error."
 goto ShellCodeError
 endif
 set BusInterfaceType = $($R1)
 set BusNumber = $($R2)
 set AdapterList = {{$(Option),0, XXXXX}} 
Debug-Output "$(InfFile) : BusInterfaceType = $(BusInterfaceType)"
 Debug-Output "$(InfFile) : BusNumber = $(BusNumber)"
 endif 
else
 Debug-Output "$(InfFile) : Running 3.51 or higher using PCI Dectection"
 


set NTDetected = $(TRUE)
 set Vendor = 4279 
set CFIDList = $(CFIDList)
 Debug-Output "$(InfFile) : VendorID = $(Vendor)"
 Debug-Output "$(InfFile) : CFIDList = $(CFIDList)"
 set AdapterList = {}
 ForListDo $(CFIDList)
 set-div CFID = $($) 1
 set DeviceID = $($)
 Shell $(UtilityInf), GetPCIInformation, $(Vendor) $(CFID)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 ForListDo $($R0)
 set AdapterList = >($(AdapterList), {*($($),1), *($($),2), $(DeviceID)})
 EndForListDo
 EndForListDo
 ifstr(i) $(AdapterList) == {}
 set Error = $(CANNOT_FIND_ANY_CARD)
 set CommonStatus = USER_CANCEL
 set from = end
 goto nonfatal
 endif
 endif 



Debug-Output "$(InfFile) : Adapterlist = $(AdatperList)"
 ForListDo $(AdapterList)
 Set InstallCard = "YES"
 ifint $(NTDetected) == $(TRUE)
 set DetectedBusNum = *($($),1)
 set DetectedSlotNum = *($($),2)
 set DeviceID = *($($),3)
 Debug-Output "$(InfFile) : DetectedBusNumber = $(DetectedBusNum)"
 Debug-Output "$(InfFile) : DetectedSlotNum = $(DetectedSlotNum)"

 Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), +
 $(DetectedSlotNum), $(ProductHardware$(DeviceID)Description), $(ProductHardwareName)
 
ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 ifstr $($R0) != "NO_ERROR"
 set Error = $($R0)
 goto fatal
 endif
 ifstr(i) $($R1) == "YES"
 set InstallCard = "NO" 
endif 
endif
 


ifstr(i) $(InstallCard) == "NO"
 Debug-Output "$(InfFile) : Card Already at $(DetectedBusNum):$(DetectedSlotNum) already installed!"
 set Error = "An adapter at $(DetectedBusNum):$(DetectedSlotNum) is already installed!"
 Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 else
 Debug-Output "$(InfFile) : Installing Card at $(DetectedBusNum):$(DetectedSlotNum)!"
 Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
 ifint $($R4) != -1
 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
 endif
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 set RegistryErrorIndex = $($R0)
 Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
 EndWait
 CloseRegKey $($R1)
 CloseRegKey $($R2)
 CloseRegKey $($R3)
 goto fatalregistry
 endif
 Set HardNetCardKey = $($R1)
 Set HardNetRuleKey = $($R2)
 Set HardParameterKey = $($R3)
 set AdapterNumber = $($R4)
 set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
 {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(DeviceID)Title)},+
 {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(DeviceID)Description)},+
 {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
 {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
 {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
 Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 


set BusTypeNum = 5 
ifstr(i) $(DeviceID) == "36944"
 set CardType = 0
 else-ifstr(i) $(DeviceID) == "36945"
 set CardType = 0
 else-ifstr(i) $(DeviceID) == "36949"
 set CardType = 0
 else
 set CardType = 2
 endif 



ifint $(NTDetected) == $(TRUE)
 set BusNumber = $(DetectedBusNum)
 set SlotNum = $(DetectedSlotNum) 
set BusInterfaceType = $(BusTypeNum)
 set WakeOnLan = YES
 set WakeOnLink = NO 
set FlowControl = YES 

Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)"

 



Set NewValueList = {+
 {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
 {Slot,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)},+
 {WakeOnMagic,$(NoTitle),$(!REG_VT_SZ),$(WakeOnLan)},+
 {WakeOnLink,$(NoTitle),$(!REG_VT_SZ),$(WakeOnLink)},+
 {FlowControl,$(NoTitle),$(!REG_VT_SZ),$(FlowControl)},+
 }
 Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)"
 Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif

 Set NewValueList = { {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)} }
 Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)"
 Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 else
 Set NewValueList = {+
 {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
 }
 Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)"
 Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 endif

 Set NewValueList = {+
 {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
 {CardType,$(NoTitle),$(!REG_VT_DWORD),$(CardType)},+
 {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
 }

 Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)"
 Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 
			ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
			Shell $(UtilityInf), AddDefaultNetcardParameters, $(HardParameterKey)
			endif
		
 set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
 set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
 set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
 {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
 {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
 {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
 
Debug-Output "$(InfFile) : HardwareRuleKey = $(NewValueList)"
 Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 CloseRegKey $(HardNetCardKey)
 CloseRegKey $(HardNetRuleKey)
 CloseRegKey $(HardParameterKey)
 endif 
EndForListDo

 

OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ProductHardwareName) $(!REG_KEY_ALL_ACCESS) KeyService
 Ifstr $(KeyService) != "" 
SetRegValue $(KeyService) {ImagePath,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareUpgradePath)}
 else 
goto fatalregistry 
endif 
CloseRegKey $(KeyService) 


OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\EventLog\System\"$(ProductHardwareName) $(!REG_KEY_ALL_ACCESS) KeyEventLog
 Ifstr $(KeyEventLog) != "" 
SetRegValue $(KeyEventLog) {EventMessageFile,$(NoTitle),$(!REG_VT_SZ),$(NetEventDLL)} 
else 
goto fatalregistry 
endif 
CloseRegKey $(KeyEventLog) 







ifstr $(!STF_PLATFORM) == $(INF_PROCESSER) 


install "Install-Uninstaller" 



OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\"$(ProductSoftwareName) $(!REG_KEY_ALL_ACCESS) + 
KeyNt 

set TrayIconList = {3CUNINSTALL,$(NoTitle),$(!REG_VT_SZ),$(3CNUMBER)} 
SetRegValue $(KeyNt) $(TrayIconList) 
CloseRegKey $(KeyNt) 




ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) 
ifstr $(Install_3NIC_Diag) == "YES" 

OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall" + 
$(!REG_KEY_ALL_ACCESS) KeyNt 
ifstr $(KeyNt) == "" 
CreateRegKey $(!REG_H_LOCAL) {"SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall", + 
0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" KeyNt 
endif 

OpenRegKey $(KeyNt) "" "3ComNicUnInstall" $(!REG_KEY_ALL_ACCESS) KeyNt2 
ifstr $(KeyNt2) == "" 
CreateRegKey $(KeyNt) {"3ComNicUnInstall" , 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) +
 "" KeyNt2 
endif 

set NewValueList = {{DisplayName, $(NoTitle), $(!REG_VT_SZ), "3Com NIC Diagnostics"}, + 
{UninstallString, $(NoTitle), $(!REG_VT_SZ), "UN3C90x.EXE"}} 

Shell $(UtilityInf), AddValueList, $(KeyNt2), $(NewValueList) 
ifint $($ShellCode) != $(!SHELL_CODE_OK) 
goto ShellCodeError 
endif 

CloseRegKey $(KeyNt) 
CloseRegKey $(KeyNt2) 

endif 
endif 





ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) 
install "Install-Tray" 


OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" + 
$(!REG_KEY_ALL_ACCESS) KeyNt 

set TrayIconList = {COMSMDEXE,$(NoTitle),$(!REG_VT_SZ),$(TrayIconExe)" -off"} 
SetRegValue $(KeyNt) $(TrayIconList) 
CloseRegKey $(KeyNt) 


endif 





ifstr $(Install_PACE) == "YES" 
Debug-Output "$(InfFile) : (Install_PACE) == "YES"" 
install "Install-PACE" 


Shell "", PaceRegistry 

endif 





ifstr $(Install_dRMON) == "YES" 
Debug-Output "$(InfFile) : (Install_dRMON) == "YES""
 install "Install-dRMON" 
set SRCDIR_OVERRIDE_Save = $(!STF_SRCDIR_OVERRIDE) 
set !STF_SRCDIR_OVERRIDE = $(SrcDir)
 
Shell $(!STF_WINDOWSSYSPATH)\drmonnt.inf, InstallOption, $(CurrLang),+ 
$(Option) ,$(SrcDir), YES, YES, YES, NO 
set !STF_SRCDIR_OVERRIDE = $(SRCDIR_OVERRIDE_Save) 

										 
endif 




ifstr $(Install_3NIC_Diag) == "YES" 
Debug-Output "$(InfFile) : (Install_3NIC_Diag) == "YES""
 install "Install-3nicdiag" 


ifstr(i) $(!STF_GUI_UNATTENDED) != "YES" 
RunProgram ExitCode "Windows Directory" "" 3nicdiag.exe "-inf" 
endif 


ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) 


ifstr(i) $(Install_Shortcuts) == "YES" 
Debug-Output "$(InfFile) : (Install_Shortcuts) == "YES""
 RunProgram ExitCode "Windows Directory" "" COMSMD.EXE "-setup" 

Debug-Output "$(InfFile) : Enabling Tray Icon" 
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" +
 $(!REG_KEY_ALL_ACCESS) KeyNt 

set TrayIconList = {COMSMDEXE,$(NoTitle),$(!REG_VT_SZ),$(TrayIconExe)" -try"} 
SetRegValue $(KeyNt) $(TrayIconList) 
CloseRegKey $(KeyNt) 
endif 

endif 
endif 


endif

 EndWait
 goto successful

updateparameters =+
 Debug-Output "$(InfFile) : Updateparameters"
 set HardParameterKey = $($R3)
 
ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 CloseRegKey $(KeyParameters)
 goto successful

bindingadapter =+
 Debug-Output "$(InfFile) : bindingadapter"
; StartDetachedProcess ExitCode "" "" DACONFIG.exe 1
 
Return STATUS_SUCCESSFUL
 
set Error = "Binding: Sorry, not yet implemented."
 goto fatal

removeadapter = +
 Debug-Output "$(InfFile) : removeadapter"
 Debug-Output "$(InfFile) : ----> $(ProductKeyName), $(!NTN_RegBase)"
 Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
 Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
 $(ProductSoftwareName)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 set RegistryErrorIndex = $($R0)
 Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
 goto fatalregistry
 endif
 else
 Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
 $(ProductSoftwareName), $(!NTN_RegBase)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 set RegistryErrorIndex = $($R0)
 Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
 goto fatalregistry
 endif
 endif
 
ifstr(i) $(!STF_PLATFORM) == $(INF_PROCESSER) 
RunProgram ExitCode "Windows Directory" "" UN3C90x.EXE "-inf" 
;RunProgram ExitCode "Windows Directory" "" DACONFIG.EXE "2" 
endif

 

ifstr $(Install_dRMON) == "YES" 

OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\DTA" $(!REG_KEY_READ) KeydRMON
 ifstr $(KeydRMON) != "" 



Shell $(!STF_WINDOWSSYSPATH)\drmonnt.inf, InstallOption, $(CurrLang),$(Option) ,$(SrcDir), YES, YES, YES, -inf 

CloseRegKey $(KeydRMON)
 endif
 endif
 

goto end

UpgradeSoftware = +
 Debug-Output "$(InfFile) : UpdateSoftware" 



install "Install-Option" 
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS 
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" 
ifint $($ShellCode) != $(!SHELL_CODE_OK) 
goto ShellCodeError 
endif 
set Error = $($R0) 
goto fatal 
endif 

OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(!REG_KEY_ALL_ACCESS) KeyProduct 
Ifstr $(KeyProduct) != "" 
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) 
ifint $($ShellCode) != $(!SHELL_CODE_OK) 
Debug-Output "ShellCode error" 
goto ShellCodeError 
endif 
set !UG_Filename = $($R0) 

install "Install-INF" 
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS 
goto fatal 
endif 

SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)} 
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)} 
SetRegValue $(KeyProduct) {Review,$(NoTitle),$(!REG_VT_DWORD),$(ProductReview)} 
CloseRegKey $(KeyProduct) 


OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ProductHardwareName) $(!REG_KEY_ALL_ACCESS) KeyService
 Ifstr $(KeyService) != "" 
SetRegValue $(KeyService) {ImagePath,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareUpgradePath)}
 else 
goto fatalregistry 
endif 
CloseRegKey $(KeyService) 


OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\EventLog\System\"$(ProductHardwareName) $(!REG_KEY_ALL_ACCESS) KeyEventLog
 Ifstr $(KeyEventLog) != "" 
SetRegValue $(KeyEventLog) {EventMessageFile,$(NoTitle),$(!REG_VT_SZ),$(NetEventDLL)} 
else 
goto fatalregistry 
endif 
CloseRegKey $(KeyEventLog) 


OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase) $(!REG_KEY_ALL_ACCESS) KeyNt 

set LoopList = {1,2,3,4,5,6,7,8} 
set WinNTList = {WinNT,$(NoTitle),$(!REG_VT_SZ),YES} 
Set NewValueList = {{WakeOnMagic,$(NoTitle),$(!REG_VT_SZ),"YES"},+ 
{WakeOnLink,$(NoTitle),$(!REG_VT_SZ),"NO"},+ 
{FlowControl,$(NoTitle),$(!REG_VT_SZ),"YES"}} 

ForListDo $(LoopList) 
OpenRegKey $(KeyNt) "" $(ProductHardwareName)$($)"\Parameters" $(!REG_KEY_ALL_ACCESS) TestKey 

ifstr $(TestKey) != $(KeyNull) 
Shell $(UtilityInf), AddValueList, $(TestKey), $(NewValueList) 
ifint $($ShellCode) != $(!SHELL_CODE_OK) 
goto ShellCodeError 
endif 

OpenRegKey $(!REG_H_LOCAL) "" $(NetworkCardsKey)$($)"\NetRules" $(!REG_KEY_ALL_ACCESS) NetCardKey 

ifstr $(NetCardKey) != $(KeyNull) 
SetRegValue $(NetCardKey) {"InfName",$(NoTitle),$(!REG_VT_SZ),$(!UG_Filename)} 
CloseRegKey $(NetCardKey) 
endif 
CloseRegKey $(TestKey) 
endif 

EndForListDo 
else 
goto fatalregistry 
endif 




ifstr $(!STF_PLATFORM) == $(INF_PROCESSER) 


install "Install-Uninstaller" 



OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\"$(ProductSoftwareName) $(!REG_KEY_ALL_ACCESS) + 
KeyNt 

set TrayIconList = {3CUNINSTALL,$(NoTitle),$(!REG_VT_SZ),$(3CNUMBER)} 
SetRegValue $(KeyNt) $(TrayIconList) 
CloseRegKey $(KeyNt) 




ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) 
ifstr $(Install_3NIC_Diag) == "YES" 

OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall" + 
$(!REG_KEY_ALL_ACCESS) KeyNt 
ifstr $(KeyNt) == "" 
CreateRegKey $(!REG_H_LOCAL) {"SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall",+ 
0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" KeyNt 
endif 

OpenRegKey $(KeyNt) "" "3ComNicUnInstall" $(!REG_KEY_ALL_ACCESS) KeyNt2 
ifstr $(KeyNt2) == "" 
CreateRegKey $(KeyNt) {"3ComNicUnInstall" , 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) +
 "" KeyNt2 
endif 

set NewValueList = {{DisplayName, $(NoTitle), $(!REG_VT_SZ), "3Com NIC Diagnostics"},+ 
{UninstallString, $(NoTitle), $(!REG_VT_SZ), "UN3C90x.EXE"}} 

Shell $(UtilityInf), AddValueList, $(KeyNt2), $(NewValueList) 
ifint $($ShellCode) != $(!SHELL_CODE_OK) 
goto ShellCodeError 
endif 

CloseRegKey $(KeyNt) 
CloseRegKey $(KeyNt2) 

endif 
endif 









ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) 
install "Install-Tray" 


OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" + 
$(!REG_KEY_ALL_ACCESS) KeyNt 

set TrayIconList = {COMSMDEXE,$(NoTitle),$(!REG_VT_SZ),$(TrayIconExe)" -off"} 
SetRegValue $(KeyNt) $(TrayIconList) 
CloseRegKey $(KeyNt) 


endif 





ifstr $(Install_PACE) == "YES" 
Debug-Output "$(InfFile) : (Install_PACE) == "YES""
 install "Install-PACE" 


Shell "", PaceRegistry 

endif 





ifstr $(Install_dRMON) == "YES" 
Debug-Output "$(InfFile) : (Install_dRMON) == "YES""
 install "Install-dRMON" 





set InstallMode_Save = $(!NTN_InstallMode) 
set !NTN_InstallMode = install 
set SRCDIR_OVERRIDE_Save = $(!STF_SRCDIR_OVERRIDE) 
set !STF_SRCDIR_OVERRIDE = $(SrcDir) 

Shell $(!STF_WINDOWSSYSPATH)\drmonnt.inf, InstallOption, $(CurrLang), + 
$(Option) ,$(SrcDir), YES, YES, YES, NO 
set !NTN_InstallMode = $(InstallMode_Save) 
set !STF_SRCDIR_OVERRIDE = $(SRCDIR_OVERRIDE_Save) 
endif 




ifstr $(Install_3NIC_Diag) == "YES" 
Debug-Output "$(InfFile) : (Install_3NIC_Diag) == "YES"" 
install "Install-3nicdiag" 


ifstr(i) $(!STF_GUI_UNATTENDED) != "YES" 
RunProgram ExitCode "Windows Directory" "" 3nicdiag.exe "-inf" 
endif 


ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) 


Debug-Output "$(InfFile) : (Install_Shortcuts) == $(Install_Shortcuts)" 
ifstr(i) $(Install_Shortcuts) == "YES" 
Debug-Output "$(InfFile) : (Install_Shortcuts) == "YES"" 
RunProgram ExitCode "Windows Directory" "" COMSMD.EXE "-setup" 

Debug-Output "$(InfFile) : Enabling Tray Icon" 
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" +
 $(!REG_KEY_ALL_ACCESS) KeyNt 

set TrayIconList = {COMSMDEXE,$(NoTitle),$(!REG_VT_SZ),$(TrayIconExe)" -try"} 
SetRegValue $(KeyNt) $(TrayIconList) 
CloseRegKey $(KeyNt) 
endif 

endif 
endif 



endif

 goto end

successful = +
 Debug-Output "$(InfFile) : Successful"
 goto end

abandon = +
 Debug-Output "$(InfFile) : Abandon"
 ForListDo $(OEM_ABANDON_OPTIONS)
 Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
 $(ProductSoftwareName), $($)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 set RegistryErrorIndex = $($R0)
 Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
 goto fatalregistry
 endif
 EndForListDo
 Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
 Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
 $(ProductSoftwareName), FALSE
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 set RegistryErrorIndex = $($R0)
 Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
 goto fatalregistry
 endif
 endif
 goto end

warning = +
 Debug-Output "$(InfFile) : warning"
 Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 ifstr(i) $($R1) == "OK"
 goto $(to)
 else-ifstr(i) $($R1) == "CANCEL"
 goto $(from)
 else
 goto "end"
 endif

nonfatalinfo = +
 Debug-Output "$(InfFile) : nonfatalinfo"
 Set CommonStatus = STATUS_USERCANCEL
 Set Severity = STATUS
 goto nonfatalmsg

nonfatal = +
 Debug-Output "$(InfFile) : nonfatal"
 Set Severity = NONFATAL
 goto nonfatalmsg

nonfatalmsg = +
 Debug-Output "$(InfFile) : nonfatalmsg"
 ifstr(i) $(Error) == ""
 Set Severity = NONFATAL
 Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 set Error = $($R0)
 endif
 Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 ifstr(i) $($R1) == "OK"
 goto $(from)
 else
 
goto "RemoveAdapter"
 endif

fatalregistry = +
 Debug-Output "$(InfFile) : fatalregistry"
 Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 set Error = $($R0)
 goto fatal

fatal = +
 Debug-Output "$(InfFile) : fatal"
 ifstr(i) $(Error) == ""
 Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 set Error = $($R0)
 endif
 Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 goto setfailed

ShellCodeError = +
 ifint $($ShellCode) == $(!SHELL_CODE_NO_SUCH_INF)
 Debug-Output "$(InfFile) : ShellCodeError - SHELL_CODE_NO_SUCH_INF"
 else-ifint $($ShellCode) == $(!SHELL_CODE_NO_SUCH_SECTION)
 Debug-Output "$(InfFile) : ShellCodeError - SHELL_CODE_NO_SUCH_SECTION"
 else
 Debug-Output "$(InfFile) : ShellCodeError - SHELL_CODE_ERROR"
 endif
 set DlgType = "MessageBox"
 set STF_MB_TITLE = $(ShellCodeErrorTitle)
 set STF_MB_TEXT = $(ShellCodeErrorText) 
set STF_MB_TYPE = 1
 set STF_MB_ICON = 3
 set STF_MB_DEF = 1
 ui start "Error Message"
 goto setfailed

setfailed = +
 Debug-Output "$(InfFile) : Setfailed"
 set CommonStatus = STATUS_FAILED
 ifstr(i) $(OEM_ABANDON_ON) == TRUE
 set OEM_ABANDON_ON = FALSE
 goto abandon
 endif
 goto end

end = +
 goto term

term = +
 Return $(CommonStatus)
 

[Install-Option]
 set STF_VITAL = ""
 set STF_OVERWRITE = "VERIFYSOURCEOLDER"
 Debug-Output $(InfName)"Adding files: Files-$(NDIS_VER), SrcDir=$(SrcDir)"
 AddSectionFilesToCopyList Files-$(NDIS_VER) $(SrcDir)\..\winnt $(!STF_WINDOWSSYSPATH)\drivers
 set !STF_NCPA_FLUSH_COPYLIST = TRUE
 CopyFilesInCopyList
 Exit

[Install-Uninstaller]
 set STF_VITAL = ""
 set STF_OVERWRITE = "VERIFYSOURCEOLDER"
 AddSectionFilesToCopyList Files-Uninstaller $(SrcDir)\..\WIN32 $(!STF_WINDOWSSYSPATH)
 set !STF_NCPA_FLUSH_COPYLIST = TRUE
 CopyFilesInCopyList
 Exit

 
[Install-3nicdiag]
 set STF_VITAL = ""
 set STF_OVERWRITE = "VERIFYSOURCEOLDER"
 AddSectionFilesToCopyList Files-3nicdiag $(SrcDir)\..\WIN32 $(!STF_WINDOWSSYSPATH)
 AddSectionFilesToCopyList Files-HwDll $(SrcDir)\..\WINNT $(!STF_WINDOWSSYSPATH)
 set !STF_NCPA_FLUSH_COPYLIST = TRUE
 CopyFilesInCopyList
 Exit

[Install-PACE]
 set STF_VITAL = ""
 set STF_OVERWRITE = "VERIFYSOURCEOLDER"
 AddSectionFilesToCopyList Files-PACE $(SrcDir)..\win32 $(!STF_WINDOWSSYSPATH)
 set !STF_NCPA_FLUSH_COPYLIST = TRUE
 CopyFilesInCopyList
 Exit

[Install-Tray]
 set STF_VITAL = ""
 set STF_OVERWRITE = "VERIFYSOURCEOLDER"
 AddSectionFilesToCopyList Files-Tray $(SrcDir)..\WIN32 $(!STF_WINDOWSSYSPATH)
 set !STF_NCPA_FLUSH_COPYLIST = TRUE
 CopyFilesInCopyList
 Exit
 
[Install-dRMON]
 set STF_VITAL = ""
 set STF_OVERWRITE = "VERIFYSOURCEOLDER"
 AddSectionFilesToCopyList Files-dRMON $(SrcDir)drmon $(!STF_WINDOWSSYSPATH)
 AddSectionFilesToCopyList Files-dRMONINF $(SrcDir)..\WINNT $(!STF_WINDOWSSYSPATH)
 set !STF_NCPA_FLUSH_COPYLIST = TRUE
 CopyFilesInCopyList
 Exit

[Install-INF]
 set STF_VITAL = ""
 AddSectionFilesToCopyList Files-Inf $(SrcDir)..\NT351 $(!STF_WINDOWSSYSPATH)
 set !STF_NCPA_FLUSH_COPYLIST = TRUE
 CopyFilesInCopyList
 Exit

[Source Media Descriptions]
 1 = "Windows NT Setup Disk #1" 
2 = "3Com Etherdisk for Fast EtherLink Server NIC (DISK 1)"
 3 = "3Com Etherdisk for Fast EtherLink Server NIC (DISK 2)"

[ProductType]
STF_PRODUCT = Winnt

[Files-Inf] 
3, oemsetup.inf,SIZE=36000, RENAME=$(!UG_Filename)

[Files-3nicdiag]
3,3nicdiag.exe, SIZE=165504
3,3nicdiag.hlp, SIZE=20877
3,3varaddr.txt, SIZE=113

[Files-HwDll]
3,hwaccess.dll,SIZE=20198
3,pcomdrv.sys, SIZE=5000
3,3c90xcfg.dll, SIZE=59458


[Files-Tray]
3,comsmd.exe, SIZE=8957

[Files-dRMON]
3,undrmon.exe, SIZE=8957

[Files-dRMONINF]
3,drmonnt.inf, SIZE=8957

[Files-PACE]
3,pacecfg.cpl, SIZE=107457
3,pacecfg.hlp, SIZE=6617

[Files-Uninstaller]
3,UN3C90X.EXE, SIZE=6617

[Files-NDIS3]
3,EL980n3.SYS , SIZE=25001

[Files-NDIS4]
3,EL980n4.SYS , SIZE=25001


[LanguagesSupported]
 ENG

[OptionsTextENG]
 3C980 = "3Com Fast EtherLink Server NIC"
 
[FileConstantsENG]
 ProCaption = "Windows NT NIC Setup"
 ProCancel = "Cancel"
 ProCancelMsg = "Windows NT Networking is not correctly installed. "+
 "Are you sure you want to cancel copying files?"
 ProCancelCap = "Network Setup Message"
 ProText1 = "Copying:"
 ProText2 = "To:"

ConnectionList = ^(ConnectionChoices, 1)
ConnectionValues = ^(ConnectionChoices, 2)
NoList = ^(NoChoices, 1)
NoValues = ^(NoChoices, 2)
ShellCodeErrorTitle = "Error: "$(Function$(Option)Title)
ShellCodeErrorText = "Shell Code Error."
CANNOT_FIND_ANY_CARD = "Network card is not present in the system"

[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"







Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 0.70