README.TXT Driver File Contents (IBMMouseSuite.zip)

Mouse Suite README File
for Windows 95/98/ME & Windows NT 4.0

(c) Copyright 1998-1999. All Rights Reserved.


TABLE OF CONTENTS
=================
1. Before Installation
2. Installation Guide
3. Uninstallation



1. Before Installation
-----------------------
   If you have installed special mouse drivers or mouse software on your
   system, other than the Standard PS/2 Port Mouse, Microsoft PS/2 Port Mouse,
   please uninstall them before installing this software.

   Note: If your mouse interface is USB, you will need Windows 98. There is
         no USB support in Windows NT 4.0 or Windows 95.

2. Installation Guide
----------------------
   Running setup.exe on this diskette is the fastest way to install this software.

   For unattended installation, you can use parameter /S for silence install
   and /NR to specify no reboot. For example:
     setup /s          (silent installation, may reboot)
     setup /s /nr      (silent installation, will NOT reboot)

   For PS/2 and serial mouse, you may install the mouse driver manually as follows:

   - Windows 95 and Windows NT 4.0
      1. Click on "Start " button and point "Settings".
      2. Click on "Control Panel".
      3. Double click on "Mouse" icon and display "Mouse Properties".
      4. Double click on "General" Tab in the "Mouse Properties" dialog box.
      5. Click on "Change..." button and display "Select Device".
      6. Click on "Have Disk..." button and display "Install From Disk".
         Insert this disk and change "Copy manufacturer's files from" to
  	 to this directory (eg: "A:\") and then click "OK" button.
      7. Click on "OK" button after displaying "Select Device" with the
         supported items and selecting the appropriate one.
      8. "Mouse Properties" will be displayed and you can certify the name
  	 which you choose.
      9. Use Keyboard from now on. Highlight "Close" button by "Tab" key
  	 and press "Enter" key. (There might be the case to take some time
	 to be displayed "Close" button.)
     10. Restart the Windows. (Remember to take this disk out and connect
  	 the mouse to your system before restart.)

   - Windows 98
      1. Click on "Start " button and point "Settings".
      2. Click on "Control Panel".
      3. Double click on "System" icon and display "System Properties".
      4. In the "Device Manager" tab, double click on the mouse icon
         in the device list.
      5. Select the proper pointing device under mouse and click the
         "Properties" button.
      6. A property page about this mouse will appear, select the
         "Driver" tab and then click the "Update Driver..." button.
      7. Follow the instruction on the screen to complete the
         driver update procedure.

   For USB mouse installation, you should run SETUP.EXE once before or after you
   connected the mouse.


3. Uninstallation
------------------
   - Windows 95/98 & Windows NT 4.0
      1. In Control Panel, open "Add/Remove Programs".
      2. In Install/Uninstall tab, select this software from the list and
         click on the "Add/Remove" button.
      3. Follow the instruction on the screen to complete the
         uninstallation procedure.





Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 2.09