Additional Information
Sound Galaxy NX PRO 16 Version 1.71
This file contains additional information and changes about the
various software that was not available at printing time.
Using Digital (.WAV) Audio with DOS 6.0's DoubleSpace*
======================================================
The DoubleSpace utility included with DOS 6.0 can cause problems
if you attempt to play or record "high data rate" (i.e.: stereo/
44.1kHz/16-bit) digital audio to or from a compressed disk. In
DOSDAT or WinDAT, the symptom will be a "Disk Could Not Keep Up
With Digital Audio" error message, or in some cases the program
may even crash.
Therefore, if you anticipate that you will be playing or recording
a lot of stereo/44.1kHz/16-bit digital audio, you should set up a
non-compressed drive partition and configure both DOSDAT and WinDAT
to use this drive as their Work and Temp directories. In both
programs this is done from the Setup window.
For information on setting up a non-compressed partition for your
hard drive, refer to your DOS 6.0 Users Guide.
*The same procedure should be followed if you are using Stacker, a
third-party disk compression utility.
Changes To Audiostation v1.11 and later
=======================================
The user interface for Audiostation v1.11 and later has been changed
slightly in order to make it easier to use.
To go to the last or first item in a MIDI, CD, or DAT playlist, you
should click on the Next or Previous button while holding down the
[Shift] key on your computer keyboard. This was previously
accomplished by double-clicking on the Next or Previous buttons.
The CD Module's Playlist window now includes a Next button that makes
it easier when you're naming tracks for a CD playlist. Once you've
entered the name for a track, either click on the Next button or press
the Enter key to name the next track.
Notes About Using EMM386.EXE
============================
When running applications with EMM386.EXE installed, the following
error message may appear:
"EMM386 DMA buffer is too small"
You can overcome this problem in two ways:
- remove the EMM386.EXE entry from the CONFIG.SYS file
OR
- add the following parameter to the EMM386.EXE entry in the
CONFIG.SYS file:
D=64
where D specifies how many kilobytes of memory should be
reserved for buffered Direct Memory Access (DMA).
An example of this may be:
C:\WINDOWS\EMM386.EXE D=64
CD-ROM Audio Cable Pin Specifications for Sound Galaxy Audio Card
=================================================================
The following describes the signals and pin assignments of the CD-ROM audio
cable for Mitsumi & Panasonic CD ROM drives.
Legends:
R - Right
L - Left
G - Ground
NC - Not Connected
1. Mitsumi CD-ROM Audio Cable
-----------------------------
______ R R ______
| |-----\ /-----| |
|__ | G G | |
| | |-----\ /-----| |
| | | L <---------------------------------------------> L | |
|__| |-----/ \-----| |
| | G G | |
|______|-----/ \-----|______|
4-way CD Audio 4-way CD Audio
Female Connector Female Connector
to sound card to CD-ROM drive
2. Panasonic CD-ROM Audio Cable
-------------------------------
______ R NC ______
| |-----\ /-----| |
|__ | G L | |
| | |-----\ /-----| |
| | | L <---------------------------------------------> G | |
|__| |-----/ \-----| |
| | NC R | |
|______|-----/ \-----|______|
4-way CD Audio 4-way CD Audio
Female Connector Female Connector
to sound card to CD-ROM drive
--- End of File ---
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.