Additional Information
Sound Galaxy NX II Version 2.11
This file contains additional information and changes about the
various software that was not available at printing time.
Additional Parameter for SGCDM.SYS CD-ROM Driver
================================================
If you are using a Mitsumi LU005S CD-ROM drive with the sound card,
please note that there is an additional parameter (optional) for its
SGCDM.SYS driver.
The additional "/X" parameter is be used to load the stock buffers
(specified with the "/M" parameter) into extended memory.
For more information on the "/M" parameter, please refer to your
sound card's manual.
Notes About Using EMM386.EXE
============================
When running applications with EMM386.EXE installed, the following
error message may appear:
"EMM386 DMA buffer is too small"
You can overcome this problem in two ways:
- remove the EMM386.EXE entry from the CONFIG.SYS file
OR
- add the following parameter to the EMM386.EXE entry in the
CONFIG.SYS file:
D=64
where D specifies how many kilobytes of memory should be
reserved for buffered Direct Memory Access (DMA).
An example of this may be:
C:\WINDOWS\EMM386.EXE D=64
CD-ROM Audio Cable Pin Specifications for Sound Cards
=====================================================
The following describes the signals and pin assignments of the CD-ROM audio
cable for the various models of CD-ROM drives; namely, Mitsumi, Panasonic
and Sony.
Legends:
R - Right
L - Left
G - Ground
NC - Not Connected
1. Mitsumi CD-ROM Audio Cable
-----------------------------
______ R R ______
| |-----\ /-----| |
|__ | G G | |
| | |-----\ /-----| |
| | | L <---------------------------------------------> L | |
|__| |-----/ \-----| |
| | G G | |
|______|-----/ \-----|______|
4-way CD Audio 4-way CD Audio
Female Connector Female Connector
to sound card to CD-ROM drive
2. Panasonic CD-ROM Audio Cable
-------------------------------
______ R NC ______
| |-----\ /-----| |
|__ | G L | |
| | |-----\ /-----| |
| | | L <---------------------------------------------> G | |
|__| |-----/ \-----| |
| | NC R | |
|______|-----/ \-----|______|
4-way CD Audio 4-way CD Audio
Female Connector Female Connector
to sound card to CD-ROM drive
3. Sony CD-ROM Audio Cable
--------------------------
______ R R ______
| |-----\ /-----| |
|__ | G G | |
| | |-----\ /-----| |
| | | L <---------------------------------------------> G | |
|__| |-----/ \-----| |
| | G L | |
|______|-----/ \-----|______|
4-way CD Audio 4-way CD Audio
Female Connector Female Connector
to sound card to CD-ROM drive
--- End of File ---
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.