c200-104-bios.txt Driver File Contents (c200-104-bios.zip)

======================================================================
Micronics C200 BIOS 
======================================================================
 
Release Notes
-----------------
This is the BIOS version 1.04 for the Micronics C200 system board.

BIOS Flash Installation Notes
------------------
The following steps are recommended to properly update the Micronics 200 system 
board with this updated 20643104.bin file.
1.  Create a DOS system boot disk.
2.  Copy the contents of this BIOS set to the DOS system boot disk.
3.  Boot the system from this disk.
4.  Type "awdflash 20643104.bin" where 20643104.bin is the name of the BIN file.
5.  After the flash process has completed, reboot the system.
6.  System BIOS update has been completed.

Known Limitations
------------------
None

=======================================================================
Diamond Multimedia Systems, Inc.       (c) 1993-98, All Rights Reserved
=======================================================================
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 2.37