The "UC33e FL Studio" XML Bank has 3 Presets with Transport Controls mapped for FL Studio 6 (it may work for other versions, but it was created and tested w/ 6). The remaining presets have been copied from the UC33e Factory Defaults. In FL Studio, go to the OPtions Meny and select MIDI Settings, select and "Enable" the UC33 MIDI in 1 for input, and set the "Controller Type" to be "Tascam US-428". For Presets 1-3 the Play button will toggle Play/Pause, Stop will stop and return to the beginning of the song, ReWind, and ReWind and Fast Forward only work while the buttons are held down (As soon as the button is released, it stops ReWinding or Fast Forwarding.), and the 0 (zero) button will toggle record on/off. The Knobs and Sliders are ready to use with FL Studio's "Link to COntroller" feature for mapping volume, pan, etc. The "Master Volume" slider is the same on each of the 3 presets so that you always have control over your master volume (after using link to controller to map it). On preset 1, the remaining knobs and sliders are assigned to different MIDI CC's on MIDI ch 1, preset 2 for MIDI Ch 2, and preset 3 for MIDI ch 3. The buttons 1-9 are programmed to be toggle switches (i.e. for Mute on/off). Since these duplicate some of the MIDI cc's used for the knobs, they are assigned to MIDI ch 16 for preset 1, ch 15 for preset 2, and ch 14 for preset 3. The transport controls are programmed the same for all 3 presets. Enjoy!Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.