This XLM file has 2 Presets with volume and transport controls mapped for Pro Tools for the Oxygen8 v2. The remaining presets were copied from the factory defaults.
Preset 1: The knobs 1-8 are programmed to control volume for ch's 1-8, and the transport controls, well, that's self explanatory. The loop/cycle button isn't programmed because there is no CC to assign for it.
Preset 2: Is virtually identical to Preset 1, except the Record button will "Bank Right", allowing you to control tracks 9-16, and 17-24 when pressed again, etc. The Loop button will "Bank Left" allowing you to switch control from 9-16 back to 1-8, etc.
The knobs and buttons themselves are programmed to be on MIDI ch 16 while the Global channel was left on 1.
To setup an Oxygen 8v2 as a control surface with Pro Tools:
1. Go to http://www.digidesign.com/index.cfm?navid=54&langid=100&itemid=4796 and download the Legacy MIDI Controller file (CS-10) for your version of Pro Tools.
2. Install this file in:
Macintosh HD > Applications > Digidesign > Pro Tools> Controllers (Mac)
C:\Program Files\Common Files\Digidesign\DAE\Controllers (PC)
3. Open Peripherals from Set Up drop down menu
4. Choose third tab “MIDI controllers” and select CS-10 under type, then Oxygen8 v2 Port 1 for both “Receive from” and “Send to” as well as “8” for “# Ch’s”
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.