Oxygen 61 - Key Rig This Zip file contains 1 XML file with 4 presets mapped to control the M-Audio Key Rig software. The "Oxygen 61 Key Rig.XML" needs to be loaded into the Oxygen with Enigma (www.m-audio.com/enigma). Preset 1 is mapped to the SP-1 Stage Piano on MIDI Ch 1. Preset 2 is mapped to the MS-2 Polyphonic Synthesizer on MIDI Ch 2. Preset 3 is mapped to the MB-3 Electromagnetic Organ on MIDI Ch 3. Preset 4 is mapped to the GM4 General MIDI Module on MIDI Ch 4. Be sure to click the meter above "4" on the GM4 module to select that MIDI channel. *On this preset, the controllers are assigned to follow the Global MIDI channel, whcih is currently set to Ch4. This way, if you change the Global MIDI channel, the controls will follow. The butons below the faders are assigned to send MIDI Program changes messages for program #'s 0-9. More information on sending program changes can be found on p20 of the Oxygen PDF User Guide. A listing of General MIDI Instruments and Program Changes can be found in Appendix C (p.25) of the Oxygen PDF User Guide. *Note - only the GM4 module will respond to program change messages*Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.