This XLM files contains 1 Preset mapped to volume and transport controls for Pro Tools for the 02. The remaining presets were copied from the factory defaults.
The 8 knobs are assigned to control volume level for the 1st 8 channels in the mixer.
The 1st 5 buttons (left to right) are assigned to RW, FF, Stop, Play, and Rec.
The assigned knobs and buttons are on MIDI channel 16.
To setup your 02 as a Pro Tools control surface:
1. Go to http://archive.digidesign.com/download/controllers/ and download the Legacy MIDI Controller file (CS-10).
2. Install this file in Applications > Digidesign > Pro Tools> Controllers (Mac)
C:\Program Files\Common Files\Digidesign\DAE\Controllers (PC)
3. Open PTMP Peripherals from Set Up drop down menu
4. Choose third tab “MIDI controllers” and select CS-10 under type, then O2 (or whatever controller you’re using) for both “Receive from” and “Send to” as well as “8” for “# Ch’s”
5. Open Enigma and map controllers as follows:
More information is available in the MIDI Control Surfaces Guide from the same web page listed above.
Please note that to automate XPand!, you must disable the CS-10 option from Peripherals.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.