1. m-audio_axiomAIR61_win_x86_x64.zip Driver
2. Axiom 49 Key Rig info.txt File Contents

Axiom 49 Key Rig info.txt Driver File Contents (m-audio_axiomAIR61_win_x86_x64.zip)

Axiom 49 - Key Rig

This Zip file contains 1 XML file with 4 presets mapped to control the M-Audio Key Rig software.  The "Axiom 49 Key Rig.XML" needs to be loaded into the Axiom with Enigma (www.m-audio.com/enigma).


Preset 1 is mapped to the SP-1 Stage Piano on MIDI Ch 1.


Preset 2 is mapped to the MS-2 Polyphonic Synthesizer on MIDI Ch 2.


Preset 3 is mapped to the MB-3 Electromagnetic Organ on MIDI Ch 3.


Preset 4 is mapped to the GM4 General MIDI Module on MIDI Ch 4.  Be sure to click the meter above "4" on the GM4 module to select that MIDI channel.

*On this preset, the controllers are assigned to follow the Global MIDI channel, whcih is currently set to Ch4.  This way, if you change the Global MIDI channel, the controls will follow.


The butons below the faders are assigned to send MIDI Program changes messages for program #'s 0-9.  

To send a program change:(from p.11 of the Axiom PDF User Guide)

49- and 61-note versions:
< Press the Program button.
< The LCD will flash the program number that was last sent out.
< Enter the program change in the range 0-127 on the numeric keypad.
< You can also use the -/+ buttons to step through programs.

A listing of General MIDI Instruments and Program Changes can be found in Appendix B1 (p.39) of the Axiom PDF User Guide.

*Note - only the GM4 module will respond to program change messages*