;**************************************************************************************** ; ; netucg3n.inf ; ; This installation script supports Windows Vista for the ; Ralink RT2870 series USB Wireless LAN Card. ; ; Copyright (c)2007 , Ralink Technology Corp., All Rights Reserved ; Developed by RaLink Technology, Corp. -- http://www.ralinktech.com ; ;************************************************************************************** [Version] Signature = "$Chicago$" Class = Net ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318} Provider = %BUFFALO% Compatible = 1 CatalogFile = ucg300n.cat ; For WHQL certification. DriverVer = 08/27/2007, 2.01.00.0005 [ControlFlags] ;***********Ralink 802.11n board *********** ;ExcludeFromSelect = USB\VID_148F&PID_2870 [Manufacturer] %BUFFALO% = BUFFALO [BUFFALO] ; DisplayName Section DeviceID ; ----------- ------- -------- %WLIUCG300N.DeviceDesc% = Ralink.ndi, USB\VID_0411&PID_00E8 %WLIUCG300HP.DeviceDesc% = RalinkHP.ndi, USB\VID_0411&PID_0148 ;******************************************************************************************* ; NT specific entries ;******************************************************************************************* [Ralink.ndi.NT] AddReg = Common.reg, RTUSB.ndi.NT.reg Characteristics = 0x84 ; NCF_REMOVABLE | NCF_HAS_UI | NCF_PHYSICAL BusType = 15 ; USB CopyFiles = NT.CopyFiles *IfType = 71 ; IF_TYPE_IEEE80211 *MediaType = 16 ; NdisMediumNative802_11 *PhysicalMediaType = 9 ; NdisPhysicalMediumNative802_11 ; NT services sections [Ralink.ndi.NT.Services] AddService = ucg300n, 2, Generic.Service, common.EventLog [RalinkHP.ndi.NT] AddReg = Common.reg, RTUSB.ndi.NT.reg, RemoveFlag.reg Characteristics = 0x84 ; NCF_REMOVABLE | NCF_HAS_UI | NCF_PHYSICAL BusType = 15 ; USB CopyFiles = NT.CopyFiles *IfType = 71 ; IF_TYPE_IEEE80211 *MediaType = 16 ; NdisMediumNative802_11 *PhysicalMediaType = 9 ; NdisPhysicalMediumNative802_11 ; NT services sections [RalinkHP.ndi.NT.Services] AddService = ucg300n, 2, Generic.Service, common.EventLog ;******************************************************************************************* ; common regs for NT ;******************************************************************************************* [Common.reg] ; ; WirelessMode ; HKR, , WirelessMode, 0, "3" ; ; Enable TX Burst ; HKR, , TXBurst, 0, "1" ; ; Use Short Slot Time ; HKR, , ShortSlot, 0, "1" ; ; Use Ofdm rate in adhoc mode ; HKR, , AdhocOfdm, 0, "1" ; ; Radio On/Off ; HKR, , Radio, 0, "0" HKR, NDI\params\Radio, ParamDesc, 0, "Radio On/Off" HKR, NDI\params\Radio, type, 0, "enum" HKR, NDI\params\Radio, default, 0, "0" HKR, NDI\params\Radio\enum, 1, 0, "Disable" HKR, NDI\params\Radio\enum, 0, 0, "Enable" ; ; Channel ; HKR, , Channel, 0, %CHANNEL% HKR, Default, Channel, 0, %CHANNEL% ; ; Country Region G Band ; ;HKR, , CountryRegion, 0, "0" ;HKR, NDI\params\CountryRegion, ParamDesc, 0, "Country Region 11G" ;HKR, NDI\params\CountryRegion, type, 0, "enum" ;HKR, NDI\params\CountryRegion, default, 0, "0" ;HKR, NDI\params\CountryRegion\enum, 0, 0, "(Channel 1 - 11)" ;HKR, NDI\params\CountryRegion\enum, 1, 0, "(Channel 1 - 13)" ;HKR, NDI\params\CountryRegion\enum, 2, 0, "(Channel 10 - 11)" ;HKR, NDI\params\CountryRegion\enum, 3, 0, "(Channel 10 - 13)" ;HKR, NDI\params\CountryRegion\enum, 4, 0, "(Channel 14)" ;HKR, NDI\params\CountryRegion\enum, 5, 0, "(Channel 1 - 14)" ;HKR, NDI\params\CountryRegion\enum, 6, 0, "(Channel 3 - 9)" ;HKR, NDI\params\CountryRegion\enum, 7, 0, "(Channel 5 - 13)" ; ; Country Region A Band ; ;HKR, , CountryRegionABand, 0, "0" ;HKR, NDI\params\CountryRegionABand, ParamDesc, 0, "Country Region 11A" ;HKR, NDI\params\CountryRegionABand, type, 0, "enum" ;HKR, NDI\params\CountryRegionABand, default, 0, "0" ;HKR, NDI\params\CountryRegionABand\enum,0, 0, "Ch(36 - 64,149 - 165)" ;HKR, NDI\params\CountryRegionABand\enum,1, 0, "Ch(36 - 140)" ;HKR, NDI\params\CountryRegionABand\enum,2, 0, "Ch(36 - 64)" ;HKR, NDI\params\CountryRegionABand\enum,3, 0, "Ch(52 - 64,149 - 161)" ;HKR, NDI\params\CountryRegionABand\enum,4, 0, "Ch(149 - 165)" ;HKR, NDI\params\CountryRegionABand\enum,5, 0, "Ch(149 - 161)" ;HKR, NDI\params\CountryRegionABand\enum,6, 0, "Ch(36 - 48)" ;HKR, NDI\params\CountryRegionABand\enum,7, 0, "Ch(36 - 165)" ;HKR, NDI\params\CountryRegionABand\enum,8, 0, "Ch(52 - 64)" ; ; RDG ; HKR, , RDG, 0, "1" ;HKR, NDI\params\RDG, ParamDesc, 0, "RDG" ;HKR, NDI\params\RDG, type, 0, "enum" ;HKR, NDI\params\RDG, default, 0, "1" ;HKR, NDI\params\RDG\enum, 0, 0, "Disable" ;HKR, NDI\params\RDG\enum, 1, 0, "Enable" ; ; HTCapable ; HKR, , HTCapable, 0, "1" ;HKR, NDI\params\HTCapable, ParamDesc, 0, "HT Capable" ;HKR, NDI\params\HTCapable, type, 0, "enum" ;HKR, NDI\params\HTCapable, default, 0, "1" ;HKR, NDI\params\HTCapable\enum, 0, 0, "Disable" ;HKR, NDI\params\HTCapable\enum, 1, 0, "Enable" ; ; Block ACK settings ; HKR, , BACapability, 0x10001, "0x07034040" HKR, Default, BACapability, 0x10001, "0x07034040" ; ; Transmit Rate setting ; HKR, , TransmitSetting, 0x10001, "0x2b215" HKR, Default, TransmitSetting, 0x10001, "0x2b215" ; ; WPS Device Name ; HKR, , WPSDevName, 0, %WPS_DEVNAME_DEF_STR% HKR, Default, WPSDevName, 0, %WPS_DEVNAME_DEF_STR% [RemoveFlag.reg] HKR, , SafelyRemoveOff, 0, "1" ;******************************************************************************************* ; DestinationDirs ;******************************************************************************************* [NT.CopyFiles] ucg300n.sys,,,2 [SourceDisksNames] 1 = %INSTALL_DISK_STR%,,, [SourceDisksFiles] ucg300n.sys = 1,, [DestinationDirs] NT.CopyFiles = 12 ; system32\drivers subdirectory on NT DefaultDestDir = 11 ;******************************************************************************************* ; NT specific ;******************************************************************************************* [RTUSB.ndi.NT.reg] HKR, Ndi, Service, 0, "ucg300n" HKR, Ndi\Interfaces, UpperRange, 0, "ndis5" HKR, Ndi\Interfaces, LowerRange, 0, "wlan, ethernet" [Generic.Service] DisplayName = %WLIUCG300N.Service.DispName% ServiceType = 1 ;%SERVICE_KERNEL_DRIVER% StartType = 3 ;%SERVICE_AUTO_START% ErrorControl = 1 ;%SERVICE_ERROR_NORMAL% ServiceBinary = %12%\ucg300n.sys LoadOrderGroup = NDIS [common.EventLog] AddReg=common.AddEventLog.reg [common.AddEventLog.reg] HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll,%%SystemRoot%%\System32\drivers\netr28u.sys" HKR, , TypesSupported, 0x00010001, 7 ;******************************************************************************************* ; Strings ;******************************************************************************************* [strings] BUFFALO = "BUFFALO INC." WLIUCG300N.DeviceDesc = "BUFFALO WLI-UC-G300N Wireless LAN Adapter" WLIUCG300HP.DeviceDesc = "BUFFALO WLI-UC-G300HP Wireless LAN Adapter" INSTALL_DISK_STR = "AirNavigator CD" WLIUCG300N.Service.DispName = "BUFFALO WLI-UC-G300N Wireless LAN Driver" ; ; Parameters ; CHANNEL = "1" WPS_DEVNAME_DEF_STR = "Ralink Client"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.